In the past couple of days, I seem to have developed a problem with making entries into elog's displayed with Chrome (the latest, 31.0.1650.63) on 
Mac OS (10.9.1, the latest).  The problem occurs with attempting to edit or enter HTML encoded pages with fckedit; although pages render correctly 
in list mode, if you try to edit or enter an entry, the page is blank, the cursor is missing, you can't see text or type new text.  I ran elogd -v by hand, 
and there were no obvious problems, and I looked at the developer consoles in Chrome, and the only place I see any hint of what the problem might 
be is the Javascript console which says this:

event.returnValue is deprecated. Please use the standard event.preventDefault() instead.
Uncaught SecurityError: Blocked a frame with origin "http://localhost:8080" from accessing a frame with origin "chrome-
extension://pioclpoplcdbaefihamjohnefbikjilc".  The frame requesting access has a protocol of "http", the frame being accessed has a protocol of 
"chrome-extension". Protocols must match.
 fckeditorcode_gecko.js:36

It works ok in Safari, but it would be nice to use Chrome, and it was working ok until recently.  I don't think the problem occurred when I updated to 
Mac OS 10.9.1, but I don't keep careful track of the Chrome version.  It's not critical, but I pretty much exhausted what I knew how to debug.  I have 
close to the latest elog (2.9.2-2455), although I see the same phenomenon on this elog (.2.9.2-2475) and I think it's related to this thread:

http://productforums.google.com/forum/#!msg/maps/hQhwWA56NbA/2XL35dU7le4J

I tried the prescription in the October 22 entry, but it didn't seem to help, although I wasn't sure I had really tested it with compressed javascript and 
cache and what have you.

Hi all !!!

i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.

I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system

config has kerberos listed as an authentication method. I saw on the logs that the current daemon

didnt have kerberos support compiled in.

Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does

amnyone have any example i could check ?

Did i have to use a patched version ? or compile it on my own ?

Regards

Hi, 
my elogd crashes sometimes when I click on the "Change config" button. What info should I collect more than below/attached?

In windows EventViewer I see this printouts:

###
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Windows Error Reporting" /> 
  <EventID Qualifiers="0">1001</EventID> 
  <Level>4</Level> 
  <Task>0</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:25:30.000000000Z" /> 
  <EventRecordID>28059</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>108889037262</Data> 
  <Data>1</Data> 
  <Data>APPCRASH</Data> 
  <Data>Not available</Data> 
  <Data>0</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data /> 
  <Data /> 
  <Data>C:\Users\hognik\AppData\Local\Temp\WER9155.tmp.WERInternalMetadata.xml</Data> 
 
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_elogd.exe_9ef84f861b91d5afaf68864978184ca611e7a22a_d4f2c951_08bd38b0</Data>

  <Data /> 
  <Data>0</Data> 
  <Data>7232f1e4-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data>0</Data> 
  <Data>94c2d6a18797708666faf33a7273855a</Data> 
  </EventData>
  </Event>
###

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Application Error" /> 
  <EventID Qualifiers="0">1000</EventID> 
  <Level>2</Level> 
  <Task>100</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:24:47.000000000Z" /> 
  <EventRecordID>28058</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data>1568</Data> 
  <Data>01d2e9c028b88983</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>7232f1e4-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data /> 
  <Data /> 
  </EventData>
  </Event>

###

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Windows Error Reporting" /> 
  <EventID Qualifiers="0">1001</EventID> 
  <Level>4</Level> 
  <Task>0</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:24:07.000000000Z" /> 
  <EventRecordID>28057</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>108889037262</Data> 
  <Data>1</Data> 
  <Data>APPCRASH</Data> 
  <Data>Not available</Data> 
  <Data>0</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data /> 
  <Data /> 
  <Data>C:\Users\hognik\AppData\Local\Temp\WERBE94.tmp.WERInternalMetadata.xml
C:\Users\hognik\AppData\Local\Temp\WERCA4D.tmp.appcompat.txt triagedump.dmp
C:\Users\hognik\AppData\Local\Temp\WERCB77.tmp.WERDataCollectionFailure.txt</Data> 
 
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_elogd.exe_9ef84f861b91d5afaf68864978184ca611e7a22a_d4f2c951_0a4ff4e6</Data>

  <Data /> 
  <Data>0</Data> 
  <Data>5206c994-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data>4104</Data> 
  <Data>94c2d6a18797708666faf33a7273855a</Data> 
  </EventData>
  </Event>

###

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="Application Error" /> 
  <EventID Qualifiers="0">1000</EventID> 
  <Level>2</Level> 
  <Task>100</Task> 
  <Keywords>0x80000000000000</Keywords> 
  <TimeCreated SystemTime="2017-06-20T12:23:53.000000000Z" /> 
  <EventRecordID>28056</EventRecordID> 
  <Channel>Application</Channel> 
  <Computer>NIKLAS</Computer> 
  <Security /> 
  </System>
- <EventData>
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>elogd.exe</Data> 
  <Data>0.0.0.0</Data> 
  <Data>58f9c864</Data> 
  <Data>c0000005</Data> 
  <Data>00064eea</Data> 
  <Data>2338</Data> 
  <Data>01d2e9baf6174f0f</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>C:\Program Files (x86)\ELOG\elogd.exe</Data> 
  <Data>5206c994-55b3-11e7-826a-e4b3181bd6c1</Data> 
  <Data /> 
  <Data /> 
  </EventData>
  </Event>
###

> Ooops, I just realized that the Windows 2.2.3 distribution contained the old 
> (2.2.2) executable for elogd.exe. I apologize for that. I have updated the 

that's ok. i just it was driving me nuts there for a while...everything is fine now...

i've tried other web based msg boards, but i keep coming back to elog...

Stefan - Just to say that this is an excellent piece of work well done.

I have just started an internal company Elog server, couple of 
clarifications :

1) is there a way around seeing the password in text when self regestering, 
if I turn this option off when the user changes his password will this 
password still be seen?

2) I have changed all the files to be owned on my RedHat Server by the 
user:group as elog:elog and set and moved the logbooks to another directory 
other than in /usr/local/elog namely /home/elog/logbooks, my concern is is 
I was to upgrade to a newer version would it be a simple install over the 
top? any caveats?

thanks again an absolute dream program.

kind regards Aamir

Hello everybody.

I am sure that some of you (just like me) experimented already with themes 
and especially now with .CSS in order to give ELOG a different "look" 
and "feel". 

I was wondering if we could maybe share examples of such adapted 
ELOG's .CSS files (or themes). Maybe you can take a screen shot of your 
favorite ELOG "face" (no sensitive data, of course) and post it here as an 
attachement. Or is everybody using only the original look that Stefan 
delivers as default?

Let's share some inspiration. I'll post mine as soon as finished the re-
look.

Tomas

Version 2.5.0 of ELOG has been released yesterday. The main new feature is 
the automatic mirroring of logbooks between different elog servers. 

This is useful if one wants to synchronize logbooks between a desktop PC 
and a laptop, for example. During synchronization, new or modified entries 
on both sides are merged intelligently. Another application is if several 
companies or institutes want to keep a ELOG database locally, but have the 
databases synchronized periodically with each other. Periodic mirroring 
can be set up with a built in cron-like facility. 

Although the synchronization has been tested extensively, I still consider 
this part in beta state. Before using it, one should make a backup of 
existing logbooks. The flag "Mirror simulate" can be used to test the 
mirroring without actually overwriting or deleting anything. If problems 
arise with mirroring, they should be reported to the author.

Localization files have been updated, so if anybody volunteers to update 
or make a new translation, please contact the author.

I just noticed the problem of mail notification with big attachments. For a
files or photos exchange setup we could run into load and bandwidth problem
quickly. Any way to restrict mail notification by attributes or without
attachment?

Thanks,
nait.