> Try to submit the following message:
> 
> *** cut here ***
> -------------------------------------------------
> -------------------------------------------------
> -------------------------------------------------
> -------------------------------------------------
> *** cut here ***
> 
> In fact after the next line there were 4 lines with '-', but
> they were not accepted by elog:

Ok, also fixed. Updated version is at 

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

Here is actually an example with '----' at the end:

-------------------------------------------------
-------------------------------------------------
-------------------------------------------------
-------------------------------------------------

> The exit status of elog is always 1.  It should be zero for
> a successful submission.

Has been fixed in 2.0.4

> If a message is submitted via the elog command then the reply string '> ' 
is only inserted in the first line if a reply is made.
> This message was submitted with the following commandline:
> elog -v -h midas.psi.ch -p 80 -s elogdemo -l Forum -a "Icon=icon4.gif" -
a "Author=Heiko Scheit"  -a "Author Email=h.scheit@mpi-hd.mpg.de" -
a "Subject=elog submit problem" "...Message-text..."
> Please press the reply button to see the problem.

Has been fixed in 2.0.4 (as you can see from this entry). Please make sure 
not to submit too long lines via "elog". For browser submissions, the line 
length is limited to 78 characters, but not for "elog" submissions.

> When the option 'Reverse sort = 1' is used then the first entry
> is not displayed (ID=1) when threaded mode is requested.
> 
> Probably you can see the problem using this link and switching 
> on reverse sort.  
> 
> http://midas.psi.ch/elogdemo/Linux/last20?mode=threaded

Has been fixed in 2.0.4, have a look at

http://midas.psi.ch/elogdemo/Linux/last20?mode=threaded&reverse=1

> Comiling elogd 2.0.4 under Solaris obviously fails with
> 
> gcc  -o elog elog.c -lsocket -lnsl
> gcc  -o elogd elogd.c -lsocket -lnsl
> elogd.c: In function `ss_file_find':
> elogd.c:1372: `alphasort' undeclared (first use in this function)
> elogd.c:1372: (Each undeclared identifier is reported only once
> elogd.c:1372: for each function it appears in.)
> make: *** [elogd] Error 1
> 
> because alphasort is an ucb'ism which does not exist under SYSV
> 
> ... not very portable :-(

I was not aware of this. Actually, I don't need 'alphasort' so I removed it 
from the source. The update is at

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

Please give it a try.

>    If you have only one entry in the logbook and have it set up in threaded 
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon 
> of the entry or the number of the entry to see it, it does not allow you 
> to.  If there is more than one entry, it works fine.  

Ok, has been fixed. Will come in 2.0.5

>    Also I wanted to make a submit page from where you could either go back 
> to the logbook which you just entered a message for or type a new entry for 
> that logbook.  First of all, is there a way to have only one file called 
> submitpage.html in which I can define this for all logbooks or do i need it 
> for ever logbook.  And also, is there a way I can even set a link that will 
> allow to create a new entry.  I tried: 
>     <a href="demo/?cmd=new">Enter</a> another message<p>
> 
> but for some reason it does not work.  Is there a way to implement this?

The documentation was wrong about that which has been corrected. The proper 
file contents should be

<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message

This way one only needs one file for all logbooks.

> The last x link TEXT now shows up like this
> 
>    'Last 20 entries?mode=threaded'
> 
> I can not reproduce this with the elogdemo logbook, however.

...because it has been fixed in meantime (revision 2.41). I have not made a 
new release since I want to fix the elog password submission first. In 
meantime, you can get the actual version from 

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

>     In the newest version of eLog, I was having trouble saving the 
> configurations once I change them through the web interface.  

I found a problem in the elogd.c code, which might cause that proplem 
sometimes. The fix is available from

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

If you need a windows executable, please let me know.

> I can change 
> them and save them fine if I do it in notepad; but that way you have to 
> restart the elogd server.

That should not be necessary, since elogd reads in the configuration file at 
each access, so it can be modified externally without problem (although the 
internal configuration should be the preferred way...)

> Also I was wondering if you were going to add 
> any of the wish list items on version 2.0.6 (Conditional attributes seems 
> to have the most votes and would be an extremely helpful feature!! :-).  

I will have some spare time towards the end of August, so I hope to work on 
these requests next month.