Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 781 of 808  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Icon Author Author Email Category OSdown ELOG Version Subject
  25   Tue Mar 1 19:41:29 2005        

For some reason it looses the "m" so line 5 instead of having
"hh:mm" has "hh: m"


Please ideas ;)
Cheers,
GL.
  25   Tue Mar 1 19:41:29 2005        

For some reason it looses the "m" so line 5 instead of having
"hh:mm" has "hh: m"


Please ideas ;)
Cheers,
GL.
  970   Thu Mar 3 16:46:26 2005 Question Alex Halex@synergie-inf.com   2 Extendable options when created new entries
Hello,

I try to have two Extendable options : Client and Equipment
so here is the line in my elogd.cfg
Extendable options = Client, Equipment

When I create a new entrie, I have the 2 scroll menus(Client and 
Equipment) and the 2 buttons(Client and Equipment) but i can't create 2 
news entries, i must create one for client, after I submit, I edit one 
more time and add a new equipement. Is there a solution for this?

Thanks a lot and sorry for mistakes or problem of comprehension i'am 
french :)
  980   Wed Mar 9 10:17:51 2005 Question T. Ribbrockemgaron@gmx.net   Trying to get "Format <attribute>" to work

I am currently trying to get some attributes into one line in my logbook, with some others on a line of their own (this is on the single message page) - pretty much like in this forum.
I searched through the forum and the config examples and found elog:571 as well as elog:Config+Examples/4, but I cannot get it to work.

In the forum, the "Subject:" line is on its own line and fills the whole line, which is what I want. In my logbook, the equivalent attribute does stand on its own line, but the 'value' only fills the space of the second column (i.e., if it was in this forum, the 'value' of "Subject" would be the same width as the icon above it and the rest of the line just blank).
As far as I can see, I'm using the "Format <attribute>=1" statements in the same way as in the example - and when I compare the resulting HTML, it also looks the same. I did notice, however, that you use different CSS classes for "Subject" and its value. Hence my question: To get "Subject" and its value to stretch over the full line, is there some fancy CSS footwork involved? I was not able to find the CSS file for this forum among the configuration examples - maybe you could add it?

Thanks in advance!

  981   Mon Mar 14 21:00:57 2005 Reply Stefan Rittstefan.ritt@psi.ch   Re: 2 Extendable options when created new entries
I fixed this problem in revision 1.586. It will be contained in the next release.
  1055   Tue Apr 5 22:39:20 2005 Question Becherlehmannth@12move.de   HTML-File as attachement
When I upload a HTML-File as attachement the file is shown as the
HTML-source and not as the formatted text. Is there a possibility to see the
HTML-attachements as formatted text like images are shown as images?
  1056   Tue Apr 5 22:45:22 2005 Reply Stefan Rittstefan.ritt@psi.ch   Re: HTML-File as attachement
> When I upload a HTML-File as attachement the file is shown as the
> HTML-source and not as the formatted text. Is there a possibility to see the
> HTML-attachements as formatted text like images are shown as images?

I could turn the ASCII display off, but the result is not always what you want.
If you have a HTML file without the <html>, <header> and <body> tags, it's ok.
But if you have these tags in your HTML (and this is the normal case), the
resulting page has these tags twice, once from the ELOG page and once from the
attachment. This confuses some browsers, so the resulting page might look
strange. A solution would be to strip these tags from the attachment, but for
that I would have to interprete the HTML attachment completely, which is too
much work.

So I will turn the ASCII display off in the next release, but be prepared to see
some nonexpected results.
  1058   Wed Apr 6 14:45:22 2005 Reply Becherlehmannth@12move.de   Re: HTML-File as attachement
Yesterday I mad a little experiment:
I copied in OpenOffice the content from my HTML file, which was not shown correctly
in ELOG, to a new HTML file, uploaded it in ELOG, and now my file was shown
correctly formatted. The only one problem is that not all lines are shown, in the
last line is written ...1753 more lines... . How can I show all lines? Do I have to
recompile ELOG?
ELOG V3.1.5-3fb85fa6