When ELOG is configured for Self-Register=3, is it still possible
to use the Author attribute as a Quick Filter? 

When I try it, the Author drop down box doesn't display anything.

Thanks,
Eric

> Does this truly disable the edit command or just hide it?

You're right! In some earlier versions, it did disable it, but in 2.2.5 it 
just hides it. I fixed that bug and from 2.3.0 on it will really disable 
that command again, such that if someone enters manually

http://midas.psi.ch/elogdemo/Forum/202?cmd=Edit

will produce and error if the command is not in the menu list.

Does this truly disable the edit command or just hide it?

> > I'm interested using elog for a lab notebook.  Once entries have been
> > entered they cannot be changed/edited.
> > Is it possible for elog to be setup to support something like this?  A write
> > only mode?
> 
> What you need is an entry in the elogd.cfg file:
> 
> Manu commands = Back, New, Reply, Find, Config, Logout, Help
> 
> As you see, the "Edit" and "Delete" commands are missing here and therefore 
> do not get displayed. So you can enter a message with "New", but you cannot 
> change it afterwards.

> I'm interested using elog for a lab notebook.  Once entries have been
> entered they cannot be changed/edited.
> Is it possible for elog to be setup to support something like this?  A write
> only mode?

What you need is an entry in the elogd.cfg file:

Manu commands = Back, New, Reply, Find, Config, Logout, Help

As you see, the "Edit" and "Delete" commands are missing here and therefore 
do not get displayed. So you can enter a message with "New", but you cannot 
change it afterwards.

I'm interested using elog for a lab notebook.  Once entries have been
entered they cannot be changed/edited.
Is it possible for elog to be setup to support something like this?  A write
only mode?

> do not use confused name in attributes
> **************************************
> like
> Attributes Type, Type2
> the info on Type2 will be placed in the Type also
> see attachment 1
> 
> Never use confused name like '
> Attributes PC_Memory, Memory

I acknowledge the problem. It had to do with the fact that for checkbox 
options, the first checkbox is submitted in the above case as "Type0", the 
second as "Type1", and the third as "Type2" which conficts with the other 
attribute. I fixed that and use now "Type#0" and so on which should be fine.

The fix will be included in V2.2.6.

Stefan

do not use confused name in attributes
**************************************
like
Attributes Type, Type2
the info on Type2 will be placed in the Type also
see attachment 1

Never use confused name like '
Attributes PC_Memory, Memory

If Stephan need more info I can send a exemple of the logbooks
Etienne

I put this on the wish list.

- Stefan