> this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3
> 
> the link at the bottom of the page shows a previously installed version.
> 
> i don't install to the elog directory, i install to a ram disk and copy 
over the new executables, the source, readme and help html.
> 
> the link showed 2.1.2 until i upgraded to 2.2.2 (i didn't do anything 
different than the above. now i'm at 2.2.3 and the link is showing 
2.2.2...not that it's a big deal, i'm just wondering what i did wrong

Of course you have to stop the old elogd program and start the new one. Have 
you done that?

this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3

the link at the bottom of the page shows a previously installed version.

i don't install to the elog directory, i install to a ram disk and copy over the new executables, the source, readme and help html.

the link showed 2.1.2 until i upgraded to 2.2.2 (i didn't do anything different than the above. now i'm at 2.2.3 and the link is showing 2.2.2...not that it's a big deal, i'm just wondering what i did wrong

> In my bottom.html file I have:
> 
> <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=Open">Open</A> 
> <A Href="host/Forum/?mode=threaded&reverse=1&npp=10&Status=
> Open">(Threaded)</A> /                                                   
>   <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=C
> losed">Closed</A> /  
> <A Href="host/Forum/?mode=summary&reverse=1&npp=10">All</A>
> <A Href="host/Forum/?mode=threaded&reverse=1&npp=10">(threaded)</A> 
> tickets.
> 
> This sort of implements some of the buttons you have in your whishlist.
> 
> This works, because it is the same for all users, now what I would like 
> is to add some sort of linke that will "show all entries from ME". I 
> could do this on a per user basis, but that's not what I want, Something 
> general with $user would be preferable.
> 
> Something like:
> 
> http://midas.psi.ch/elogdemo/Forum/?
mode=threaded&reverse=1&npp=8&Author=$user
> 
> Is this possible ?

I added this feature in version 2.2.3, so now you can click on

http://midas.psi.ch/elogdemo/Forum/?mode=threaded&reverse=1&npp=8&Author=$long_name

and see all your entries.

We had the same problem here. What worked in our case was:

Traffic to port 113 (identd) was blocked. Because the server didn't give any
response at all there was a time-out to which we were waiting.  Opening up
the 113 port significantly speeded things up. Even when no ident-deamon was
running on the system. (it now gets an immediate no deamon running msg, and
can go on with it's processing instead of having to wait for a time-out)

From: http://elog.sourceforge.net/

Solaris

It was reported by Martin Huber that under Solaris 7 following command must 
be used to compile elog:

gcc -L/usr/lib/ -ldl -lresolv -lm -ldl -lnsl -lsocket elogd.c -o elogd

It was also reported that the keep-alive mechanism is not working under some 
Solaris systems, so you need to start the elogd server with the "-k" flag to 
turn keep-alives off. 



Yep... does the job.
(even with 2.2.2 under Sol 8)

In my bottom.html file I have:

<A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=Open">Open</A> 
<A Href="host/Forum/?mode=threaded&reverse=1&npp=10&Status=
Open">(Threaded)</A> /                                                   
  <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=C
losed">Closed</A> /  
<A Href="host/Forum/?mode=summary&reverse=1&npp=10">All</A>
<A Href="host/Forum/?mode=threaded&reverse=1&npp=10">(threaded)</A> 
tickets.

This sort of implements some of the buttons you have in your whishlist.

This works, because it is the same for all users, now what I would like 
is to add some sort of linke that will "show all entries from ME". I 
could do this on a per user basis, but that's not what I want, Something 
general with $user would be preferable.

Something like:

http://midas.psi.ch/elogdemo/Forum/?mode=threaded&reverse=1&npp=8&Author=$user

Is this possible ?

On our:
   SunOS operator 5.8 Generic_108528-13 sun4u sparc SUNW,Ultra-5_10

I get:

% make
gcc -g -O -o elog elog.c 
Undefined                       first referenced
 symbol                             in file
socket                              /var/tmp/ccgK4x1V.o
recv                                /var/tmp/ccgK4x1V.o
gethostbyname                       /var/tmp/ccgK4x1V.o
send                                /var/tmp/ccgK4x1V.o
gethostbyaddr                       /var/tmp/ccgK4x1V.o
connect                             /var/tmp/ccgK4x1V.o
ld: fatal: Symbol referencing errors. No output written to elog
collect2: ld returned 1 exit status
make: *** [elog] Error 1


I have no idea what is going on here

> Encoding  problem:
> 
> How to make ELOG generate HTTP pages with 
> 
> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=XXXX">
> 
> tag in header. With charset=XXX selectable via config.

I added this option, so now you can specify in the [global] section of 
elogd.c something like

charset = windows-1252

To switch to Cyrillic. The modification will be contained in the next version 
of elog (2.2.3), and is now available from the CVS repository at:

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

- Stefan