Hello,

when using the summary view, the text field displays umlauts as HTML-charachters, for e. g. diesbezüglich. 
Is there a chance that also this view displays umlauts as ä, ü, ö?

Thank you!

Uwe

It is possible to show the (new) text of a replied entry in the summary text field ?

Actually only for the original entries the text was shown in the text column of the summary report, not for the replies.

Hi,

I've set up my ELOG configuration to display one summary line in the list view. However, a word from the next line creeps in from time to time. You can see this in my logbook - look at the 'Text' column for entries 805, 802 and 800 for instance. The word 'Shift' is from the second line of the entry, but it has been added to the summary text for some reason. Any ideas how I can fix this?

ben

The elog daemon uses cascading style sheets (CSS) to format its output, such
as font family, size and color. Some people started to develop new themes
(skins) and posted them at the contributions logbook (such as
http://midas.psi.ch/elogs/Contributions/7).

From my onw experience, I know that this can be a difficult job, since it
means to change the "default.css" file and reloading a page over and over
again. I recently discovered a way to do this much easier: The Mozilla based
browsers (such as firefox, http://www.mozilla.org/products/firefox/) have an
extension called EditCSS (http://texturizer.net/firefox/extensions/#editcss)
which shows the CSS file on the left side of the browser and the web page on
the right side. Changes in the CSS editor are immediately reflected in the
browser window. This way one can change certain entries in the CSS file and
immediately see its consequences. Development of new skins should therefore
become much more easier.

The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load" and "unload" subcommands of the "launchctl" command have been deprecated for some time.  After trying my luck again on a new Mac with the latest operating system, I encountered errors of the type "Load failed: 5: Input/output error" when attempting to follow these instructions.

After a bit of searching around, I used information at the page https://www.alansiu.net/2023/11/15/launchctl-new-subcommand-basics-for-macos/ to deploy the more current subcommands as follows:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl disable system/ch.psi.elogd

Once the above can be verified, perhaps the instructions in the Administrator's Guide can be updated accordingly.

Hey,

if you define a Tooltip at the moment it is only displayed on the attribute. I would like it very much if it would also be displayed on the values (on the right column in the detailed view and on the whole column in the list view), since we are using the tooltips to define the units of the attribute and it would be nice to pop up when you hover a value.

As for the comment it would be nice to have a flag to also show the comment on the detailed view while looking at an entry. At the moment it is only showed when creating a new entry. Again we use this field to define the units.

This is an example of how we use these options:

attributes = Fill Number, Beam Current, Beam Energy, Beam Lifetime, RF Voltage S2, RF Voltage S4, RF Frequency, Synchrotron Frequency

Comment Beam Current = in mA
Comment Beam Energy = in GeV
Comment Beam Lifetime = in hh:mm
Comment RF Voltage S2 = in kV
Comment RF Voltage S4 = in kV
Comment RF Frequency = in MHz
Comment Synchrotron Frequency = in kHz

Tooltip Beam Current = in mA
Tooltip Beam Energy = in GeV
Tooltip Beam Lifetime = in hh:mm
Tooltip RF Voltage S2 = in kV
Tooltip RF Voltage S4 = in kV
Tooltip RF Frequency = in MHz
Tooltip Synchrotron Frequency = in kHz

Cheers

eddy

Hey,

if you define a Tooltip at the moment it is only displayed on the attribute. I would like it very much if it would also be displayed on the values (on the right column in the detailed view and on the whole column in the list view), since we are using the tooltips to define the units of the attribute and it would be nice to pop up when you hover a value.

As for the comment it would be nice to have a flag to also show the comment on the detailed view while looking at an entry. At the moment it is only showed when creating a new entry. Again we use this field to define the units.

This is an example of how we use these options:

attributes = Fill Number, Beam Current, Beam Energy, Beam Lifetime, RF Voltage S2, RF Voltage S4, RF Frequency, Synchrotron Frequency

Comment Beam Current = in mA
Comment Beam Energy = in GeV
Comment Beam Lifetime = in hh:mm
Comment RF Voltage S2 = in kV
Comment RF Voltage S4 = in kV
Comment RF Frequency = in MHz
Comment Synchrotron Frequency = in kHz

Tooltip Beam Current = in mA
Tooltip Beam Energy = in GeV
Tooltip Beam Lifetime = in hh:mm
Tooltip RF Voltage S2 = in kV
Tooltip RF Voltage S4 = in kV
Tooltip RF Frequency = in MHz
Tooltip Synchrotron Frequency = in kHz

Cheers

eddy