ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
69050
|
Mon Oct 21 10:46:43 2019 |
 | Finn Junker | fj@tvis.net | Question | Windows | 3.1.4 | Re: Edit of multiple posts | Hello Andres
Or maybe my reply was unclear :-), but i did use the "Show Attributes Edit" the way you meant to not show attribute BRUGER and when i do that i get:
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field.
If I save instead of submitting it looks like it does change the attribute as intented in my test Elog system. Unfortunately i've disabled save with "Save drafts = 0" in my live system - to only use submit, and enabling drafts only causes other issues. My configuration is attached
Kind Regards Finn
| Andreas Luedeke wrote: |
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
|
|
|
69049
|
Fri Oct 18 23:22:50 2019 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Windows | 3.1.4 | Re: Edit of multiple posts | I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field.
If I save instead of submitting it looks like it does change the attribute as intented in my test Elog system. Unfortunately i've disabled save with "Save drafts = 0" in my live system - to only use submit, and enabling drafts only causes other issues. My configuration is attached
Kind Regards Finn
| Andreas Luedeke wrote: |
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
|
|
69048
|
Fri Oct 18 09:40:54 2019 |
| Finn Junker | fj@tvis.net | Question | Windows | 3.1.4 | Re: Edit of multiple posts | Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field.
If I save instead of submitting it looks like it does change the attribute as intented in my test Elog system. Unfortunately i've disabled save with "Save drafts = 0" in my live system - to only use submit, and enabling drafts only causes other issues. My configuration is attached
Kind Regards Finn
| Andreas Luedeke wrote: |
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
|
69047
|
Fri Oct 18 08:50:27 2019 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Windows | 3.1.4 | Re: Edit of multiple posts | Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
69046
|
Thu Oct 17 21:29:25 2019 |
| John | secondcomingtechnologies@fastmail.com | Question | Linux | V3.1.2-bd75964 | Re: How to get Elog server to produce web server log files in Linux. | Hi again everyone; a Sebastian suggested I use a reverse proxy to complete my need to have logs show up when someone 'lands' on my first entry page. I see that Elog will only start recording logs when someone has actually started to do some work.. like login, read a post, etc... but NOT when they first enter the login page or 'listings' pages. I have tried fowarding from my router (both lighty and Apache) but so for no good. I will also look into a vhost option and shareing the same port (very difficult- if even possible) to solve my dilema.
John :)
| Stefan Ritt wrote: |
|
Have you tried
Logfile = ...
Logging level = 3
| John wrote: |
|
Hi, I have been trying for a long time to get my web server logs to record when someone accesses my Elog server. I've tried Apache2, Lighttpd, and others, all with no luck. Either the web servers complain that the port I have Elog on is in use, or I just don't get any readings. I need to see who is accessing my Elog from the web, and I hope there is a way.
Thanks again for such a wonderful program,
John
|
|
|
|
69045
|
Thu Oct 17 14:57:25 2019 |
| Finn Junker | fj@tvis.net | Question | Windows | 3.1.4 | Re: Edit of multiple posts | Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
69044
|
Wed Oct 16 13:20:31 2019 |
 | Xuan Wu | wux@ihep.ac.cn | Bug report | Linux | 3.1.3 | Re: elog hanged when uploading photo failed | Hi all,
I've found a bug in elog. It's all right that uploading an image which file name with special characters. I think it must have something to do with the code like"url_encode(file_enc, sizeof(file_enc)); /* for file names with special characters like "+" */". If I clicked the "Make small/Make larger/Original size/Rotate left/Rotate right" button, the elog server will hang. How it can be fixed? The attached image shows the debug info.
Xuan
| Stefan Ritt wrote: |
|
The problem is you have some weird characters in your file name R2BLM15 ? ? ? ? ? .PNG which confuses the interpreter. There should not be any special character or blanks in attached images.
Stefan
| Xuan Wu wrote: |
|
Hi all,
We came across a problem recently when clicking "Upload" button, then elog hanged and never being accessed. I have checked the elog logs and find that it seems that elog didn't get the path of the picture for some reason. So is it a bug or our operation isn't correct?
|
|
|
|
69043
|
Wed Oct 16 11:06:34 2019 |
 | Moustafa Messed | moustafa.messed@cern.ch | Other | Linux | latest | ELOG Stop working with kerberos configuration | Dear All
i have this problem since i tried to install ELOG latest version while make Authetnetication Kerberos ELOG stop runing any idea or help please
|
|