Re: Attributes for message workflow., posted by Andreas Luedeke on Wed Mar 30 13:46:01 2011
|
| Ryan wrote: |
|
[...] I am even open to losing the historical "status" and beeing able to change all entries on the thread on reply. (i.e. Reply #4 changes "Status" to "Approved", and the system changed all entries in the thread to "Approved")
|
One possibility is to use the new 2.9.0 feature "Propagate attributes = OPS Approval, ENG Approval, Director Approval"
A change in any of the three listed attributes would propage to the corresponding fields of all former entires of the same thread.
So if someone creates a reply and changes "OPS Approval" to "Approved", the field "OPS Approval" of the original entry would go as well to "Approved".
I just happen to know about this feature because Stefan implemented it for me :-) |
Linking two sets of logbooks, posted by Alan Stone on Wed May 17 23:39:23 2006
|
I would like to link the CMSROC ELOG at Fermilab:
http://nippon.fnal.gov:8081/
with the CMS ELOG at CERN:
https://cmsdaq.cern.ch/elog/
I am the administrator of the former. I want to keep the CMSROC logbook content
local, but I would like to make a link to the CMS CERN logbook visible from
http://nippon.fnal.gov:8081/
and ideally to have it show up as a tab from any sub-page.
Thanks in advance for any help.
Alan |
Re: Linking two sets of logbooks, posted by Stefan Ritt on Thu May 18 08:08:25 2006
|
You can achieve that with the top text option, which lets you define some HTML code visible at every ELOG page. Just create a file, let's call it top.html, and put in following contents:
<table class="frame" cellpadding=0 cellspacing=0>
<tr><td class="tabs">
<span class="sltab"><a href="https://cmsdaq.cern.ch/elog/" title="CMS ELOG at CERN">CMSDAQ</a></span>
</td></tr>
</table>
Then put following statement into your elogd.cfg:
Top text = top.html
That should do the job. |
$datetime display, posted by Fergus Lynch on Fri May 19 12:10:54 2006
|
Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, NOT seconds.
I dont nee the seconds display!
Could you please clarify the systax for me.
Many Thanks
Fergus |
|
Re: Re: $datetime display, posted by Stefan Ritt on Fri May 19 12:19:38 2006
|
| Fergus Lynch wrote: | Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, NOT seconds.
I dont nee the seconds display!
Could you please clarify the systax for me. |
Can you show me the elogd.cfg syntax you try to use? |
|
Re: Re: $datetime display, posted by Fergus Lynch on Fri May 19 14:01:34 2006
|
| Stefan Ritt wrote: |
| Fergus Lynch wrote: | Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, NOT seconds.
I dont nee the seconds display!
Could you please clarify the systax for me. |
Can you show me the elogd.cfg syntax you try to use? |
Hi There!
See in bold below (I'm sure this is me being dense, so thanks for quick reply)
Fergus
Theme = default
Comment = Recording work carried out on any core system
Time format = %B %d, %Y, %H:%M
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Status |
|
Re: Re: $datetime display, posted by Stefan Ritt on Sat May 20 09:48:52 2006
|
| Fergus Lynch wrote: |
| Stefan Ritt wrote: |
| Fergus Lynch wrote: | Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, NOT seconds.
I dont nee the seconds display!
Could you please clarify the systax for me. |
Can you show me the elogd.cfg syntax you try to use? |
Hi There!
See in bold below (I'm sure this is me being dense, so thanks for quick reply)
Fergus
Theme = default
Comment = Recording work carried out on any core system
Time format = %B %d, %Y, %H:%M
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Status |
What about
Time format = %B %d, %Y, %H:%M:%S |
|
Re: Re: $datetime display, posted by Fergus Lynch on Mon May 22 10:37:36 2006
|
| Stefan Ritt wrote: |
| Fergus Lynch wrote: |
| Stefan Ritt wrote: |
| Fergus Lynch wrote: | Apologies for being so dense but try as I might I cannot get the $datetime display to show only Day, Month , Year,hour and minutes, NOT seconds.
I dont nee the seconds display!
Could you please clarify the systax for me. |
Can you show me the elogd.cfg syntax you try to use? |
Hi There!
See in bold below (I'm sure this is me being dense, so thanks for quick reply)
Fergus
Theme = default
Comment = Recording work carried out on any core system
Time format = %B %d, %Y, %H:%M
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Status |
What about
Time format = %B %d, %Y, %H:%M:%S |
Thanks, did the trick and working perfectly (I was being dense!) |
|