Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 182 of 806  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Icon Author Author Email Category OS ELOG Version Subject
  68366   Thu Jul 21 09:37:47 2016 Reply Antonio Bulgheroniantonio.bulgheroni@gmail.comQuestionWindows2.9.2Re: Different logbook files when running elogd as admin or normal user

So I found the my log files, but this issue should probably be documented.

When running as admin my logbook files are where they should (C:\Program Files (x86)\ELOG\logbooks)

When running as local user (with no admin rights), elogd has no writing access to the logbooks directory. So it falls back to use C:\Users\[MyUserName]\AppData\Local\VirtualStore\Program Files (x86)\ELOG\logbooks

In both cases elogd -v is not helping because it says:

elogd 2.9.2 built Feb 20 2013, 09:19:10 revision 2475
Config file  : c:\Program Files (x86)\ELOG\elogd.cfg
Resource dir : c:\Program Files (x86)\ELOG
Logbook dir  : c:\Program Files (x86)\ELOG\logbooks\
FCKedit detected
Indexing logbook "sample" in "logbooks\sample\" ... 

that is not true for the local user.

Thanks again for your help,

Antonio

 

Stefan Ritt wrote:

I don't know why elogd uses different logbook directories depending on the user. Maybe you start it in different directories, or one user cannot read the config file and falls back to some default. Anyhow, you can start elogd interactively wit the -v flag which tells you which logbook files are parsed. There are no cache files or similar, everything is stored in Yymmdda.log files, you just have to search for them.

Antonio Bulgheroni wrote:

Dear all, I have a problem with my window elog installation (2.9.2) and I would like to ask your help for solving it.

I'm using elog on my lab computer for a single user installation, so something very simple. It was running smoothly for many months using the automatic window service (i.e. elogd was started automatically at boot). I need to add that the service is started as the local administrator, while my user has no administrative rights. ELOG is installed in the standard location C:\Program Files (x86)\ELOG\ with the logbook folder inside and this is actually accessible only for admins.

On 8/04/2016, elogd crashed while I was saving an edited message. Then instead of restarting the service or rebooting the PC, I was just starting elogd manually (as me not as admin). It worked for many weeks. And now comes the problem: at the next reboot the elogd service came up automatically but all the new records I added in the logbook since I re-started manually are not there. Indeed in the C:\Program Files (x86)\ELOG\logbooks the latest entry is 160408a.txt. But if I stop the service and restart elogd manually (as me not as admin), then I can see in the logbook all the new entries.

My questions is where the ascii files corresponding to the new entries? They must be saved somewhere, maybe in some temporary folder. I want to copy them back and keep them in the backup to avoid unpleasant surprise.

Thanks in advance for your help,

Antonio

 

 

  68365   Thu Jul 21 08:08:07 2016 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.9.2Re: Different logbook files when running elogd as admin or normal user

I don't know why elogd uses different logbook directories depending on the user. Maybe you start it in different directories, or one user cannot read the config file and falls back to some default. Anyhow, you can start elogd interactively wit the -v flag which tells you which logbook files are parsed. There are no cache files or similar, everything is stored in Yymmdda.log files, you just have to search for them.

Antonio Bulgheroni wrote:

Dear all, I have a problem with my window elog installation (2.9.2) and I would like to ask your help for solving it.

I'm using elog on my lab computer for a single user installation, so something very simple. It was running smoothly for many months using the automatic window service (i.e. elogd was started automatically at boot). I need to add that the service is started as the local administrator, while my user has no administrative rights. ELOG is installed in the standard location C:\Program Files (x86)\ELOG\ with the logbook folder inside and this is actually accessible only for admins.

On 8/04/2016, elogd crashed while I was saving an edited message. Then instead of restarting the service or rebooting the PC, I was just starting elogd manually (as me not as admin). It worked for many weeks. And now comes the problem: at the next reboot the elogd service came up automatically but all the new records I added in the logbook since I re-started manually are not there. Indeed in the C:\Program Files (x86)\ELOG\logbooks the latest entry is 160408a.txt. But if I stop the service and restart elogd manually (as me not as admin), then I can see in the logbook all the new entries.

My questions is where the ascii files corresponding to the new entries? They must be saved somewhere, maybe in some temporary folder. I want to copy them back and keep them in the backup to avoid unpleasant surprise.

Thanks in advance for your help,

Antonio

 

  68364   Thu Jul 21 07:44:04 2016 Question Antonio Bulgheroniantonio.bulgheroni@gmail.comQuestionWindows2.9.2Different logbook files when running elogd as admin or normal user

Dear all, I have a problem with my window elog installation (2.9.2) and I would like to ask your help for solving it.

I'm using elog on my lab computer for a single user installation, so something very simple. It was running smoothly for many months using the automatic window service (i.e. elogd was started automatically at boot). I need to add that the service is started as the local administrator, while my user has no administrative rights. ELOG is installed in the standard location C:\Program Files (x86)\ELOG\ with the logbook folder inside and this is actually accessible only for admins.

On 8/04/2016, elogd crashed while I was saving an edited message. Then instead of restarting the service or rebooting the PC, I was just starting elogd manually (as me not as admin). It worked for many weeks. And now comes the problem: at the next reboot the elogd service came up automatically but all the new records I added in the logbook since I re-started manually are not there. Indeed in the C:\Program Files (x86)\ELOG\logbooks the latest entry is 160408a.txt. But if I stop the service and restart elogd manually (as me not as admin), then I can see in the logbook all the new entries.

My questions is where the ascii files corresponding to the new entries? They must be saved somewhere, maybe in some temporary folder. I want to copy them back and keep them in the backup to avoid unpleasant surprise.

Thanks in advance for your help,

Antonio

  68363   Thu Jul 21 06:15:44 2016 Reply Andreas Luedekeandreas.luedeke@psi.chInfoLinuxELOG V3.1.0-241Re: string length limit in url tag
Several strings in ELOG are limited to 256 chars. It is likely the limit for URLs, too.
The magic number "256" appears 285 times in the elogd.c file.
It is probaly easier if you compress long URLs with goo.gl
Cheers, Andreas
Don wrote:

What is the string length limit in url tag and how to increase it?

For example,

[url=http://example.com?<text_string>]click here[/url]

When I provide very long <text_string>, it was truncated and showed partial link only.

 

  68362   Wed Jul 20 16:03:24 2016 Entry Donjang.dongwook@gmail.comInfoLinuxELOG V3.1.0-241string length limit in url tag

What is the string length limit in url tag and how to increase it?

For example,

[url=http://example.com?<text_string>]click here[/url]

When I provide very long <text_string>, it was truncated and showed partial link only.

  68361   Tue Jul 19 21:08:08 2016 Reply Donjang.dongwook@gmail.comBug reportAllELOG V3.1.0-241Re: Escape character [ or ] doesn't work within [url]

 

Andreas Luedeke wrote:

The URL encoding of ']' as '%5D' appears to work:

[url=http://example.com?arrays[%5D=v1&arrays[%5D=v2]click here[/url]

Cheers, Andreas

Don wrote:

Here is the problem:

[url=http://example.com?arrays[]=v1&arrays[]=v2]click here[/url]

How can I escape [] inside url tag?

\[\] seems not working.

 

That tweak works!

Thanks

  68360   Mon Jul 18 23:37:22 2016 Idea Andreas Luedekeandreas.luedeke@psi.chBug reportAllELOG V3.1.0-241Re: Escape character [ or ] doesn't work within [url]

The URL encoding of ']' as '%5D' appears to work:

[url=http://example.com?arrays[%5D=v1&arrays[%5D=v2]click here[/url]

Cheers, Andreas

Don wrote:

Here is the problem:

[url=http://example.com?arrays[]=v1&arrays[]=v2]click here[/url]

How can I escape [] inside url tag?

\[\] seems not working.

 

  68359   Fri Jul 15 19:46:26 2016 Entry Donjang.dongwook@gmail.comBug reportAllELOG V3.1.0-241Escape character [ or ] doesn't work within [url]

Here is the problem:

[url=http://example.com?arrays[]=v1&arrays[]=v2]click here[/url]

How can I escape [] inside url tag?

\[\] seems not working.

ELOG V3.1.5-3fb85fa6