Hi,

I'm having an issue with Elog 3.1.1 on windows 10 not displaying all log entries (after a certain date) in a logbook directory.

The logbook is saved in a Dropbox folder and the entries were created on a windows 8.1 PC with 3.1.1 also.

I created an entry in windows 10, this created a new log file (new day) with a duplicate ID, deleted the log file and then the windows 10 pc displayed all entries.

Is there any way to ensure Elogd picks up all log files ?

Thanks & Regards,

Mike

I believe there is a stunnel port for Windows, but that's more for the experienced users. I guess there is no simple solution.

Stefan

Thanks Stefan,

I checked in my ELOG folder and can't find the stunnel.cfg. Is that only available in Linux? Can you please recommend a third party SMTP server for me use to successfully enable mail notif via Windows OS. Thanks much

Cheers,

Raymund

Start with the demo example configuration, add one line after the other from your config, and figure out which is the offending statement in your config, then post a minimal configuration here which triggers the problem.

After submitting a new post, if the page is left completely alone,, it will after a few minutes prompt that the page needs to resend information.

This is the same prompt you'd get if you attempt to refresh a page that had session variables passsed to it. Example is attached.

Is there something in my config that could cause this?   This is a fresh install of the latest verison however my elogd.cfg file has been migrated throuh many installs over many versions, so it's very possible this is something following along.

thanks.

Hi All,

I got into trouble setting up the automated email notification.

elog.cfg:

;Send automatic email notifications
SMTP host = mail.ihep.ac.cn
;SMTP host = 127.0.0.1

;Some SMTP server require username/passowrd authentication
;elogd -t <your password> for creating SMTP password
SMTP username = wux@ihep.ac.cn

SMTP Password = .JYEytMGvsHANeCIfQJXmscIt4NOtzJ8GbAnh3XH280
;SMTP Password = V3gxMzYxODAxMjAxNA==
;No Email notification
Suppress Email to users = 1

elogd -v:

GET /LEBT/?cmd=Forgot&login_name=wux HTTP/1.1
timezone: -28800, offset: 28800

Email from <wux@ihep.ac.cn> to wux@ihep.ac.cn, SMTP host mail.ihep.ac.cn:
220 ihep.ac.cn Anti-spam GT for Coremail System (ihep[20151015])
EHLO 10.1.44.220
250-mail
250-PIPELINING
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-coremail 1Uxr2xKj7kG0xkI17xGrUDI0s8FY2U3Uj8Cz28x1UUUUU7Ic2I0Y2Url11UVUCa0xDrUUUUj
250-STARTTLS
250 8BITMIME
AUTH LOGIN
username:
wux@ihep.ac.cnPassword:
.JYEytMGvsHANeCIfQJXmscIt4NOtzJ8GbAnh3XH280
535 Error: authentication failed

test with telnet:

[wux@logbook ~/elog]$ telnet mail.ihep.ac.cn 25
Trying 202.38.128.6...
Connected to mail.ihep.ac.cn.
Escape character is '^]'.
220 ihep.ac.cn Anti-spam GT for Coremail System (ihep[20151015])
EHLO 10.1.44.220
250-mail
250-PIPELINING
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-coremail 1Uxr2xKj7kG0xkI17xGrUDI0s8FY2U3Uj8Cz28x1UUUUU7Ic2I0Y2Ur3T0__UCa0xDrUUUUj
250-STARTTLS
250 8BITMIME
AUTH LOGIN
334 dXNlcm5hbWU6
AUTH PLAIN
535 Error: authentication failed
Connection closed by foreign host.

Any advice and suggestions will be appreciate.

Elog does not directly support TLS encryption. See here for a wrokaround: elog:68039

Hi ELOG Community,

Please help me to configure my smtp server in Windows using gmail server

This is what in my config:

SMTP host = smtp.gmail.com

SMTP username = raymund.dawang@engagis.com (company email subscribing in gmail)
SMTP Password = xxxxxxx
 

And I was prompted by this error in elog: Error sending Email via <i>"smtp.gmail.com"</i>: 5.7.0 Must issue a STARTTLS command first. ir5sm11631778pbc.13 - gsmtp

Apprecite you help. Thanks.