| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
68134
|
Tue Sep 29 17:15:07 2015 |
 | Terry L | trflin@yahoo.com | Question | Windows | 2.7.3 | Re: Syntax for conditional list display | Hi Eddy,
Thank you for your response. I had a feeling that was the case, but I had high hopes! :) The reason I would like this feature is because I am trying to use ELOG as a software anomaly tracking log, where any user can create an ELOG and fill out "category", "computer" etc, but only administrators can fill out the "status" & "assignee". If I am lucky, this will be an added feature in a future revision.
Thanks again,
-Terry
| Edmund Hertle wrote: |
|
Hey Terry,
I don't think this is possible, since in general you cannot define config settings in a way that it would only affect specific users. For example, you also cannot have different themes for different users (as stated here: https://midas.psi.ch/elogs/Forum/68112 )
Cheers
eddy
| Terry L wrote: |
|
Good Morning,
I would like to limit the ability to edit certain attributes in an ELOG logbook, depending on the user who is logged in. I.e. if "guest" or a standard "login user" is logged in, I only want to allow the user to edit "attribute1" & "attribute2" of say, 5 attributes. However, if an Admin user or specific user, say "Terry" or "Bob" is logged in, I want to allow ALL 5 attributes to be editable. To expand on this, I may want to even limit the visibility of the attributes as well.
I've read though "Condition Attributes" section of the help page, but it is not clear to me how/if I can do this? Is that section even relevant to what I want to accomplish?
Can anyone provide some guidance?
Thank you for your time & help!
Sincerely,
Terry
|
|
|
|
68133
|
Tue Sep 29 08:50:30 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | All | 3.1.1 | Re: Creating ELog Links not working properly in HTML Editor | Hi Stefan,
yes, I know that a plain text " elog:1" works in the HTML editor, too. But if you put " elog:1" in the URL field of the link dialog, then ELOG screws up: you get the text and the link points to link type "URL", protocol "<other>", URL "1".
Or more precisely, the HTML source looks like the following:
<a href="1">elog.1</a>"><a href="1">elog.1</a>
(I've replaced ":" by "." here in the source, to avoid another iteration of links by ELOG).
That is not what I would have expected:
either it should have been remained unchanged, or it should point to the right URL of the entry elog:1 (the latter case preferred :-).
Cheers, Andreas
| Stefan Ritt wrote: |
|
Right, spaces won't work. But others work. Andreas, if you just put elog:1 without any link etc. just as plain text, it will be converted automatically into a link.
A workaround is to explicitly specify a link to an elog entry. Press the link button from the editor toolbar, enter a name and copy the full URL from the browser address bar, like here: https://midas.psi.ch/elogs/Forum/68129. If you switch to "Source" (Top left editor toolbar, you can changed the link name manually, like here.
| Andreas Luedeke wrote: |
|
I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
|
|
68132
|
Mon Sep 28 12:05:04 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | All | 3.1.1 | Re: Creating ELog Links not working properly in HTML Editor | Right, spaces won't work. But others work. Andreas, if you just put elog:1 without any link etc. just as plain text, it will be converted automatically into a link.
A workaround is to explicitly specify a link to an elog entry. Press the link button from the editor toolbar, enter a name and copy the full URL from the browser address bar, like here: https://midas.psi.ch/elogs/Forum/68129. If you switch to "Source" (Top left editor toolbar, you can changed the link name manually, like here.
| Andreas Luedeke wrote: |
|
I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
|
68131
|
Mon Sep 28 11:58:11 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | All | 2.9.0(elogd) | Re: elog client overwriting attached files when editing existing log | You are right. "Edit" should be more like "Replace". I changed that in the documentation.
I acknowledge the request to replace or append only a specific attribute or attachment, and put it on my to-do list.
Stefan
| Andreas Luedeke wrote: |
|
The "elog" command has no "append" feature. You can either create a new entry, or you can overwrite an old entry. Therefore this is not a bug but the intended bahaviour.
I admit that the documentation is misleading, since overwriting an existing entry is called "editing":
[-e <id>] Edit existing message
I interprete your posts that you would like to have two new features for the "elog" command:
- to append text to the body of an existing entry
- to add additional attachments to an existing entry
Without a specific application in mind I would like to add a request (for consistency):
- to modify a specific attribute of an existing entry.
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
I think this is a "problem" of the elog client, since it simply replaces the data. In most cases this is what you want, but since I wanted to have the option to append to the acutal message I built a function to first read-back the entry and add to the message instead of replacing it.
I just played around a bit and found that the attachments will be even disconnected, if you do not specify the -f parameter but just edit a different part of this entry.
A work-around for this is tricky. I tried to write to the "Attachment" attribute directly (-a "Attachment=Filename'), since then you coud read back the data first and manually add the filenames again. But this does not work.
Since the attachments are not actually removed, the only option I see is to modify the logbook file entry on the server by manually re-adding the filenames to the "Attachment: " line.
| Joseph McKenna wrote: |
|
Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.
I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0
elog -h localhost -p 8080 -l test -f file1.png -f file2.png -e 249 -v -x
This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.
Can anyone provide some tips? I am not sure if its a problem with the client or server.
Thank you in advance!
Joseph
|
|
|
|
|
68130
|
Mon Sep 28 06:45:03 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Request | All | 2.9.0(elogd) | Re: elog client overwriting attached files when editing existing log | The "elog" command has no "append" feature. You can either create a new entry, or you can overwrite an old entry. Therefore this is not a bug but the intended bahaviour.
I admit that the documentation is misleading, since overwriting an existing entry is called "editing":
[-e <id>] Edit existing message
I interprete your posts that you would like to have two new features for the "elog" command:
- to append text to the body of an existing entry
- to add additional attachments to an existing entry
Without a specific application in mind I would like to add a request (for consistency):
- to modify a specific attribute of an existing entry.
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
I think this is a "problem" of the elog client, since it simply replaces the data. In most cases this is what you want, but since I wanted to have the option to append to the acutal message I built a function to first read-back the entry and add to the message instead of replacing it.
I just played around a bit and found that the attachments will be even disconnected, if you do not specify the -f parameter but just edit a different part of this entry.
A work-around for this is tricky. I tried to write to the "Attachment" attribute directly (-a "Attachment=Filename'), since then you coud read back the data first and manually add the filenames again. But this does not work.
Since the attachments are not actually removed, the only option I see is to modify the logbook file entry on the server by manually re-adding the filenames to the "Attachment: " line.
| Joseph McKenna wrote: |
|
Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.
I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0
elog -h localhost -p 8080 -l test -f file1.png -f file2.png -e 249 -v -x
This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.
Can anyone provide some tips? I am not sure if its a problem with the client or server.
Thank you in advance!
Joseph
|
|
|
|
68129
|
Mon Sep 28 06:29:57 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | All | 3.1.1 | Re: Creating ELog Links not working properly in HTML Editor | I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
68128
|
Sat Sep 26 03:34:44 2015 |
| Stefano | stefano.colafranceschi@gmail.com | Question | Linux | 3.1.0 | Re: Elog command not working properly | Yes it was a path issue PHP was not loading correctly environmental path
> > <p>Hi,</p>
> >
> > <p>I have a problem running elog command from php script. Basically in the php I call system("elog -h etc etc.. And from the php command line works but not in the browser apparently without errors (php apache
> logfile no problem), any suggestions?</p>
>
> Hey,
> this sounds more like a PHP issue.
> Which PHP version are you using?
> Which webserver?
> Which php function are you using: shell_exec() or exec()? Try looking at the return of exec()
> Is the elog file set to the correct file permissions to be executed by the webserver?
> Is the elog file in the PHP path or do you take care of defining the correct path?
>
>
> eddy |
|
68127
|
Fri Sep 25 22:37:08 2015 |
| Edmund Hertle | edmund.hertle@kit.edu | Question | Linux | 3.1.0 | Re: Elog command not working properly | > <p>Hi,</p>
>
> <p>I have a problem running elog command from php script. Basically in the php I call system("elog -h etc etc.. And from the php command line works but not in the browser apparently without errors (php apache
logfile no problem), any suggestions?</p>
Hey,
this sounds more like a PHP issue.
Which PHP version are you using?
Which webserver?
Which php function are you using: shell_exec() or exec()? Try looking at the return of exec()
Is the elog file set to the correct file permissions to be executed by the webserver?
Is the elog file in the PHP path or do you take care of defining the correct path?
eddy |
|