It's probably not of much help, but for a short time I ran two elog daemons on the same linux box, using different ports.  It was thus able to run with two separate elogd.cfg files.   This is linux, and heavily biased to my eccentric way of running this linux box, but started them as:

/usr/local/sbin/elogd -p 8080 -c /home/logbooks1/elogd1.cfg -d /home/logbooks1

/usr/local/sbin/elogd -p 8081 -c /home/logbooks2/elogd2.cfg -d /home/logbooks2

Do note that as I was the only user on that linux box, I didn't have login etc.

However, I was soon asked questions by Andreas as to how I found this running, as he had encountered problems with an earlier version.  To be honest, that stopped me experimenting too far with this at that point, as well as a coincidental upgrading of my hardware.

But I was doing this *not* because I had to run two separate elogd.cfg files, but other reasons which meant splitting into two at that time vastly improved the performance of elog on the linux box at that time.  So while I didn't actually enounter any problems in doing so, I only have limited experience - and, of course, absolutely none on running even one [windows equivalent of a daemon] on Windows.

I am assuming here you have good reason for two separate elogd.cfg files, rather than just wanting to run two separate logbooks - guessing here, but one set public (no login) and one set private (with login)?

 

Is there a way of having multiple copies of elog running on one windows 2003 server? different ports?

I need to access 2 different elogd.cfg files.

After installing ELOG on a new Windows 8 machine, I found everything working fine... until I went to make a new entry.   New entries work... but the FCKEditor toolbars do not show up.  I tried a variety of things (start as a service, start not as a service, run as administrator), but nothing made the toolbar appear that I coumd find.  The ELCode editor toolbar appears, but the nifty FCKEditor toobar never appears.  I could not figure out how to debug FCKEditor.  Any ideas?

 Hi,

I have several top groups and each has several logbooks.

If I use the global option Protect Selection page=1 and Show top groups = 1, after an user logs in to the top group selection URL, the elog steers away from the top group selection page, and automatically brings him to the logbook selection page of the first top group. Is the elog programmed to exhibit this behavior?

What I would prefer is that, after an user logs in, the elog stays on the top group selection page, sine each user has his preferred destination, not always the logbooks in the first top group. Is there any setting I can use in the config file to do this? 

(My users need to access different top groups and logbooks on regular basis).

Thank you and regards.

 I am currently having a similar problem. I am migrating a few separate elogs to one new computer. I have three top groups set up with their own password files. If I log into top group A (TGA), and then try to go to top group B (TGB), I am presented with a "Create new user" screen for my login name for TGA. When I complete that form, I am taken to the user settings for top group A, rather than TGB. I can log out of TGA and then log into TGB fine, but if I try to switch between them without logging out, it freaks out.

There seems to be a problem with the cookies that keep me logged into the different top groups not recognizing that they are different entities. I'm running eLog 2.9.1 rev 436. Is it possible that this has been addressed in 2.9.2?

Thanks,

-t

 Hi,

I have several top groups and each has several logbooks.

If I use the global option Protect Selection page=1 and Show top groups = 1, after an user logs in to the top group selection URL, the elog steers away from the top group selection page, and automatically brings him to the logbook selection page of the first top group. Is the elog programmed to exhibit this behavior?

What I would prefer is that, after an user logs in, the elog stays on the top group selection page, sine each user has his preferred destination, not always the logbooks in the first top group. Is there any setting I can use in the config file to do this? 

(My users need to access different top groups and logbooks on regular basis).

Thank you and regards.