Hello,

i have a logbook with the following parameters for the Attribute "Typ":

[TEST1]
Options Typ = SDB{2}, Qualifizierung B.12.S227{4}, Qualifizierung PRO/REP{3}, Dokument zur Qualifizierung{2}, Prüf- und Wartungsvorschrift{2}, SOP ohne Change Request{2}, SOP mit Change Request{1}, Validierung PRO/REP{3}, Dokument zur Verifizierung{2}, Überprüfung und Verlängerung{2}, Spec.Sheet{2}, CoA (sofern nicht LIMS){2}, Änderungen Tg4.B07{5}, OOS (Plan/Bericht){3}, Transfer PRO/REP{3}, Studie PRO/REP{3}, Studie ohne Plan{2}, Anderes{2}
Quick filter = Date, Typ

If i choose an Entry from the "Typ" Quick Filter it shows me that there are no entries in the logbook but I'm shure that there are entries. 

Can you please help? I cannot see what's wrong.

Best Regards

Michael

I tried your configuration and it worked fine:

So can you try version 2.8.1 if that makes any difference. If not, can you send me your complete elogd.cfg, so that I can reproduce your problem.

- Stefan

 I installed 2.81 (Elog-latest) but this Version did not work. I got Error 193: %1 is not a valid Win32 Application as I tried to start the service. So i will sent you the complete elogd.cfg via Mail.

Best regards

Michael 

hello,

At home, when I change the config *. cfg, the modifications are not taken in consideration

Have you got a idea ?

Thanks a lot !

Bob

Not really, you are the first one reporting this issue. Just some thoughts:

- Can you see the changes if you look at elogd.cfg with a text editor such as notepad?

- Some write protection of elogd.cfg

- Do you have more than one server running at the same time and changing the wrong one's config?

- Stefan 

>- Can you see the changes if you look at elogd.cfg with a text editor such as notepad?

I change the configuration directly on elogd.cfg, (after i save and update my web page, and i not modification immediately)

>- Some write protection of elogd.cfg

no

- Do you have more than one server running at the same time and changing the wrong one's config?

i have one server with elog

 Let me report when I see this behaviour.

If I use a text editor on elog.cfg directly, while elog is running, then when I save the file, the new elog.cfg is in place,

but the running elog is still running with the old configuration.  You have to restart elog for it to read the new config file and

use the new settings.

This does not apply if you edit elog.cfg via the "config" option in the menu command, where elog will read the new elog.cfg

just after it has been saved.

The reason I sometimes edit the file directly is if I want to create a new logbook, but with all the configuration of another logbook,

and it's quickest to cut-and-paste,  change the heading, create a new directory and restart elog.

This may be completely off what is being reported.

Minor changes you do externally to the elogd.cfg file are reflected immediately under Windows (under Linux you have to send a HUP signal to the process to re-read the configuration). But if you make major changes like adding a new logbook, you have to restart elogd.