"Preset on reply" not work?, posted by Daniel Sajdyk on Sun Jun 14 21:30:14 2015
|
Hi all :)
I try to setup my first lobgook, and have some problem.
I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply, that he will be author of reply, but Author windows goes emtpy... No Author, or Reply User in that field. Is it correct?
Do you have any suggestions?
Here is part of config I use:
; preset author and email
Preset Author = $long_name
Preset Author Email = $user_email
; these attributes cannot be changed
Locked Attributes = Author
; options for reply
Subst on reply subject = Re: $Configuration Name
Remove on reply = Author, Author Email
Preset on reply Author = $long_name
Regards
Daniel. |
Re: "Preset on reply" not work?, posted by Stefan Ritt on Mon Jun 15 08:33:50 2015
|
You have "Remove on reply" together with "Preset on reply Author". Since the first is executed later, you first preset the author name, then remove it again. Just discard the "Remove on reply" and you are fine.
| Daniel Sajdyk wrote: |
|
Hi all :)
I try to setup my first lobgook, and have some problem.
I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply, that he will be author of reply, but Author windows goes emtpy... No Author, or Reply User in that field. Is it correct?
Do you have any suggestions?
Here is part of config I use:
; preset author and email
Preset Author = $long_name
Preset Author Email = $user_email
; these attributes cannot be changed
Locked Attributes = Author
; options for reply
Subst on reply subject = Re: $Configuration Name
Remove on reply = Author, Author Email
Preset on reply Author = $long_name
Regards
Daniel.
|
|
|
Re: "Preset on reply" not work?, posted by Daniel Sajdyk on Mon Jun 15 09:16:00 2015
|
Ok. Now it works :) Thank you :) I'm translating Elog into Polish. When I finish, can I send it to you?
Regards Daniel.
| Stefan Ritt wrote: |
|
You have "Remove on reply" together with "Preset on reply Author". Since the first is executed later, you first preset the author name, then remove it again. Just discard the "Remove on reply" and you are fine.
| Daniel Sajdyk wrote: |
|
Hi all :)
I try to setup my first lobgook, and have some problem.
I want that Author was preset by $long_name, and it can't change its name. That works correct. I also want, when other user click Reply, that he will be author of reply, but Author windows goes emtpy... No Author, or Reply User in that field. Is it correct?
Do you have any suggestions?
Here is part of config I use:
; preset author and email
Preset Author = $long_name
Preset Author Email = $user_email
; these attributes cannot be changed
Locked Attributes = Author
; options for reply
Subst on reply subject = Re: $Configuration Name
Remove on reply = Author, Author Email
Preset on reply Author = $long_name
Regards
Daniel.
|
|
|
Limited access to an attribute, posted by Michael Cianci on Mon Jun 15 19:33:39 2015
|
Is there a way to limit access to an attribute "Reviewed by" to only supervisors?
Thank you for your help
Mike |
|
Limited access to an attribute, posted by Michael Cianci on Mon Jun 15 19:38:58 2015
|
Is there a way to limit access to an attribute "Reviewed by" to only supervisors?
Thank you for your help
Mike |
|
Re: Limited access to an attribute, posted by Stefan Ritt on Mon Jun 15 22:00:40 2015
|
No.
| Michael Cianci wrote: |
|
Is there a way to limit access to an attribute "Reviewed by" to only supervisors?
Thank you for your help
Mike
|
|
|
Revisions in other languages, posted by Daniel Sajdyk on Wed Jun 17 19:20:40 2015
|
Hello.
When I use "Revisions" name for attribute I have correct entry like "DATE by XXX from SOME_IP" which is added to previous edition date.
But when i rename Revisions attribute to polish language (like "Wersje"), the entry is preceded by 3c6435es and whole looks like "3c6435es DATE by XXX from SOME_IP" and it overwrite previous entry.
Is "Revisions" attribute must be in english?
Regards Daniel.
Edit:
I know what I was doing wrong. I use:
Subst on Edit Wersje = $Revisions<br>$date przez $long_name z $remote_host
but it should be:
Subst on Edit Wersje = $Wersje<br>$date przez $long_name z $remote_host
|
|
Need to move ELOG to other host, posted by Mario Gaertner on Wed Jun 24 19:22:10 2015
|
Hi there,
our host running ELOG crashed. I installed ELOG at another host with copying backup files / folders to new installation. New installation looks fine and seems to be working. But one big problem occurs I only can see some of former existing logbooks. Are there any suggestions how to build an new ELOG with old data?
Many thanks Mario |