Stefan,

I am using the Database Like - ELOG format and on the list page, the the last two columns (on the right side) are, "Text" and "Attachments (the paperclip)".

Both of which I have deleted from the input page.

Is there anyway to remove them from the List page?

Thanks,      Mike

You need:

Show text = 0

Enable Attachments = 0

to supress the text entry box and the attachment field.

Display search = ID, Type, Location, Status

to show only the attributs of interest in the list display (your attributes could be different)

Summary lines = 0

to supress the text in the list display. At the moment, this still shows the paperclip colum, but I want to fix this in the next version.

I have a logbook named "Centaur" (instrument name) for a problem log on an instrument and a logbook named "CentaurNewLot" for

a logbook (Database Like - ELOG format) where we would log reagent lot number changes for that instrument.

The problem is that when I name the logbooks, like I have, it screws up the formatting (List page) of the second log book.

If I rename the second logbook something totally unrelated to the first logbook my originally intended formatting returns.

I tried to reproduce your problem but without success. In my case the "CentaurNewLot" looks fine:

so what is different in your case? Can you try with the simple example logbook from the distribution and the add one option after the other to see which one causes the trouble?

The way I have ELOG configured it sends an email to supervisors based on which "Department " (attribute) was selected. Problem is that when the supervisor replies the department

is still selected and it sends a second email to the supervisor. Is there any way to supress the emails (automatically) on "Reply"?

No, but you can remove the "Department" with

Remove on reply = Department

this way the attribute vanishes, but that should be ok since you always have the link to the original entry which contains the department. 

I have a logbook with data in it that I need  to  rename  and preserve the the existing data (old book) in the newly named book (i.e. can I move all of the data from one book to a new book and than delete the data from the original book)?

As always thank you for your time.

There are two ways:

1) Create a new logbook, add the "Copy to" command to the old logbook. Select all entries and copy them to the new logbook, and delete the old one.

2) Change the logbook name in elogd.cfg, by manually editing the file, then rename the subdirectory in your file system from the old to the new name, then restart elogd.

The second solution is much simpler, but you have to manipulate files and directories yourself.

Whatever you do, make sure to back up you files before any operation.