Normally it should work. Requirements are set in SPEC file.

$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh
/bin/sh
/bin/sh
config(elog) = 3.1.5-20240226.el7
krb5-libs
libc.so.6()(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.15)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libc.so.6(GLIBC_2.4)(64bit)
libc.so.6(GLIBC_2.8)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libkrb5.so.3()(64bit)
libkrb5.so.3(krb5_3_MIT)(64bit)
liblber-2.4.so.2()(64bit)
libldap-2.4.so.2()(64bit)
libm.so.6()(64bit)
libpam.so.0()(64bit)
libpam.so.0(LIBPAM_1.0)(64bit)
libssl.so.10()(64bit)
libssl.so.10(libssl.so.10)(64bit)
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(GLIBCXX_3.4)(64bit)
openldap >= 2.4.1
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rtld(GNU_HASH)
rpmlib(PayloadIsXz) <= 5.2-1

The EL7 binary needs the following RPM :

$ ldd /usr/local/sbin/elogd | awk '{print $1}' | while read r ; do rpm -qf /lib64/$r ; done | sort -u
erreur�: fichier /lib64/linux-vdso.so.1�: Aucun fichier ou dossier de ce type
erreur�: fichier /lib64/lib64/ld-linux-x86-64.so.2�: Aucun fichier ou dossier de ce type
audit-libs-2.8.5-4.el7.x86_64
cyrus-sasl-lib-2.1.26-24.el7_9.x86_64
glibc-2.17-326.el7_9.x86_64
keyutils-libs-1.5.8-3.el7.x86_64
krb5-libs-1.15.1-55.el7_9.x86_64
libcap-ng-0.7.5-4.el7.x86_64
libcom_err-1.42.9-19.el7.x86_64
libgcc-4.8.5-44.el7.x86_64
libselinux-2.5-15.el7.x86_64
libstdc++-4.8.5-44.el7.x86_64
nspr-4.35.0-1.el7_9.x86_64
nss-3.90.0-2.el7_9.x86_64
nss-softokn-freebl-3.90.0-6.el7_9.x86_64
nss-util-3.90.0-1.el7_9.x86_64
openldap-2.4.44-25.el7_9.x86_64
openssl-libs-1.0.2k-26.el7_9.x86_64
pam-1.1.8-23.el7.x86_64
pcre-8.32-17.el7.x86_64
zlib-1.2.7-21.el7_9.x86_64

Almost all of them are installed by ELOG RPM or are already installed by default Redhat profiles.

Nina, do you use right RPM version (el7/8/9) according to Rockylinux one ? El7 rpm can not be installed on RL9...

Bye

Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically installed:

Dependencies Resolved

====================================================================================================================================
 Package                          Arch                       Version                                Repository                 Size
====================================================================================================================================
Updating:
 emacs                            x86_64                     1:24.3-23.el7_9.1                      rhel7                     2.9 M
Updating for dependencies:
 emacs-common                     x86_64                     1:24.3-23.el7_9.1                      rhel7                      20 M

Transaction Summary
====================================================================================================================================
Upgrade  1 Package (+1 Dependent package)

Total download size: 23 M
Is this ok [y/d/N]:

Hi Nina,

The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does not take care of dependencies.

 Try to install with yum : yum install elog-latest.el7.x86_64.rpm

Normally the missing rpm files should be dlded from RL repo if your host can access to them...

.

Laurent

Hello all,

I am installing elog on an Rocky Linux instance. Have dependensy problem. 

rpm -Uvh elog-latest.el7.x86_64.rpm 

error: Failed dependencies:

    liblber-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libldap-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10(libssl.so.10)(64bit) is needed by elog-3.1.5-1.el7.x86_64

Any clues from developers to resolve it and keep the software working. Thank you in advance!

Bests, Nina

Hi Stefano,

I also tried to set up LDAP authentication and password file-based authentication using the same settings as yours, which is not working as expected. It does work only with the LDAP authentication and not with the password file now. If I remove the LDAP-based parameters from the configuration file it works then password files start working.

I think multiple ways of authentication do not work concurrently.


Is that issue still existing for you or is it resolved?

Thanks,
Scott


----

> Dear experts,
>    I have a logbook which has authentication as follow
> 
> Authentication = LDAP, File
> Password file = PASSWD.file
> LDAP server = ldaps://it-ldap-XXX.XXX.XX:1636
> LDAP userbase = ou=people,ou=RGY,o=XXX,c=XX
> LDAP login attribute = uid
> LDAP register = 0
> Self register = 0
> Allow password change = 0
> 
> Some of the my user (but not all) have issue in accessing this protected elogbook.
> The ldap password is correct (we checked).
> What I see in the log is as follow:
> 
> 22-Feb-2021 11:25:51 [XXX.YYY.ZZZ.QQ] {Beam Run} LOGIN user "USERNAME" (attempt)
> 22-Feb-2021 11:25:59 [XXX.YYY.ZZZ.QQ] {Beam Run} LOGIN user "USERNAME" (attempt)
> 
> The user USERNAME is present in PASSWD.file.
> 
> For other user, for which the login works, I do see an (attempt) and then (success)
> 
> we tried the standard stuff: clear cache/cookies and with different browser. We also tried to remove the user from PASSWD.file and 
> create it again, but nothing has worked.
> 
> Any suggestion how I can debug this problem?
> 
> Thanks in advance,
>   Stefano

Thanks a lot Stefan, for fixing this so quickly! I'm now running 3.1.5 fe60aaf0, with the phantom-attachment-count issue in the Summary view now resolved.  Cheers, Andreas W.

The problem with the attachment paperclips has been fixed in the current version.

Stefan

Hello,

I started using the record date feature in one logbook, since we plan to copy over old entries Joplin/Onenote. When starting a new entry, I see that the record date is automatically set to the current date, but when I reply to an elog, the record date is automatically set to the record date of the elog I'm replying to. Is there a way to fix this?