Re: Exporting the entries from ELOG, posted by Illam Pakkirisamy on Wed Mar 1 20:12:54 2023
|
Thanks Stefan for your help. It works but the only issue is, the screenshots that were included in the body of the entries are not usable. Not sure if there is any workarounds for that.
...Illam
| Stefan Ritt wrote: |
|
Find -> Export to...
| Illam Pakkirisamy wrote: |
|
Hi,
Is there a way to export the ELOG entries into a file like an Excel sheet or something. I see import but not export.
Appreciate your help.
Thanks.
Illam
|
|
|
TEXTSIZE too big message, posted by Illam Pakkirisamy on Thu Apr 6 23:20:16 2023
|
Hi,
I'm getting the TEXTSIZE TOO BIG message every time I have more text in my entry. I understand there is a way to increase the TEXTSIZE and re-compile. Where can I find the TEXTSIZE parameter that I can increase and also how do I re-compile.
Appreciate your help.
Thanks.
Illam |
|
Re: TEXTSIZE too big message, posted by Illam Pakkirisamy on Fri Apr 28 19:47:51 2023
|
Hi, any help will be appreciated on this. I have not still figured this out.
Thanks.
Illam
| Illam Pakkirisamy wrote: |
|
Hi,
I'm getting the TEXTSIZE TOO BIG message every time I have more text in my entry. I understand there is a way to increase the TEXTSIZE and re-compile. Where can I find the TEXTSIZE parameter that I can increase and also how do I re-compile.
Appreciate your help.
Thanks.
Illam
|
|
|
401 Authorization problem, posted by Ian Stokes-Rees on Fri Dec 11 18:53:17 2009
|
Grrr. Forgetting to pick an icon means my message was blasted.
I have installed elog 2.7.8 and it is running. When I connect to it and get a login window, I am always denied. If I remove the passwords, then I can login with no password information. I have tried both command line for setting passwords and directly in the elogd.cfg file.
Suggestions on what I might be doing wrong would be appreciated.
Regards,
Ian
PS - are there RESTful interfaces to automate the generation of log entries via an HTTP POST or HTTP GET? |
|
How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 04:42:49 2016
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 09:39:07 2016
|
Hi Xuan Wu,
Nothing happen, I still got an error.
I can connect to server but cannot send
Do you have any more idea?
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 10:24:18 2016
|
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Wed Nov 16 07:07:35 2016
|
Hi Xuan Wu,
I got error from stunel as below.
2016.11.17 14:07:01 LOG5[0]: Service [gmail-smtp] accepted connection from 127.0.0.1:52473
2016.11.17 14:07:03 LOG3[0]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG3[0]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:09:02 LOG5[1]: Service [gmail-smtp] accepted connection from 127.0.0.1:52510
2016.11.17 14:09:03 LOG3[1]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG3[1]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:04 LOG5[2]: Service [gmail-smtp] accepted connection from 127.0.0.1:52569
2016.11.17 14:18:05 LOG3[2]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG3[2]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:25 LOG5[3]: Service [gmail-smtp] accepted connection from 127.0.0.1:52581
2016.11.17 14:18:26 LOG3[3]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG3[3]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
Do you know about these?
| Xuan Wu wrote: |
|
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
| I Gede Made Wira Saputra wrote: |
|
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
|