Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Fri Nov 18 01:50:26 2016
|
Thanks Xuan Wu, I hope Ludeke or Stefan see my problem.
| Xuan Wu wrote: |
|
Hi,
I'm sorry that I'm not familiar with the stunel. I came across email sending problem before. I created a email server in my own PC called postfix. Elog can use this email server to send email. Finally, I could use the email server from our institution. Maybe Luedeke or Stefan can help you.
| I Gede Made Wira Saputra wrote: |
|
Hi Xuan Wu,
I got error from stunel as below.
2016.11.17 14:07:01 LOG5[0]: Service [gmail-smtp] accepted connection from 127.0.0.1:52473
2016.11.17 14:07:03 LOG3[0]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG3[0]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:09:02 LOG5[1]: Service [gmail-smtp] accepted connection from 127.0.0.1:52510
2016.11.17 14:09:03 LOG3[1]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG3[1]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:04 LOG5[2]: Service [gmail-smtp] accepted connection from 127.0.0.1:52569
2016.11.17 14:18:05 LOG3[2]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG3[2]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:25 LOG5[3]: Service [gmail-smtp] accepted connection from 127.0.0.1:52581
2016.11.17 14:18:26 LOG3[3]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG3[3]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
Do you know about these?
| Xuan Wu wrote: |
|
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
| I Gede Made Wira Saputra wrote: |
|
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
|
|
|
Re: elogd crashes on log out, posted by Matt B on Fri May 6 18:41:04 2005 
|
> > What other information can I provide that might assist in diagnosing this?
>
> Please send me your elogd.cfg configuration file.
Stefan - I am having the exact same problem as outlined here. I sent you an
email with a somewhat complicated config file. Attached to this message is a
much simpler one.
With this file, if you remove the B5 server (remove it from top group a2, and
remove the [b5] entry) the crash does not happen. If the B5 server (or any
additional server) is in the file, then the problem occurs.
For me, there are 3 places where the crash happens:
- on logout
- when an invalid username/password is used to login
- when you login to A1, then try to go to A2
This is happening on elog v2.5.9-1 (built May 2, 2005, 12:17:18 revision 1.642)
I have tried on windows 2000 and 2003 servers, and it seems to happen on both of
them.
Matt |
|
Re: elogd crashes on log out, posted by Matt B on Fri May 6 20:32:49 2005
|
Another quick update on this, it looks like the bug was introduced in version
2.5.8-2 built Mar 30 2005, 11:04:33, revision 1.611
version 2.5.8-1 built Mar 21 2005, 17:28:54, revision 1.592 does not exhibit the
behavior.
Matt |
Error Sending Email, posted by Ibrahim Genc on Thu Oct 12 16:22:40 2006
|
I've set up all e-mail configuration but I get error message after submitting a message
verbose output is as follows: every parameter I used works in outlook express.
Another question is; Can I change the port number of the smtp server? Some servers use another port than 25.
Thanks so much.
--
ibrahim
------------------------------------------------
Email ALL to genc@xxx.com.tr
timezone: -7200, offset: 10800
Email from genc@xxx.com.tr to genc@xxx.com.tr,genc@xxx.com.tr,, SMTP host
mail.xxx.com.tr:
220 mx-d.xxx.com ESMTP Postfix
EHLO neuron
250-mail-003.xxx.com
250-PIPELINING
250-SIZE 41943040
250-VRFY
250-ETRN
250-AUTH LOGIN PLAIN CRAM-MD5
250-AUTH=LOGIN PLAIN CRAM-MD5
250 8BITMIME
==== Return ================================
HTTP/1.1 302 Found
Server: ELOG HTTP 2.6.2-1722
Connection: Keep-Alive
Keep-Alive: timeout=60, max=10
Location: http://127.0.0.1:8080/PhD/4?error=Error+sending+Email+via+<i>"mail.xxx.com.tr"</i> |
|
Re: Error Sending Email, posted by Ibrahim Genc on Thu Oct 12 17:42:37 2006
|
| Stefan Ritt wrote: |
| Ibrahim Genc wrote: | | I get error message after submitting a message |
Your verbose output seems to be only partial. I have modified the verbose output recently, so please update to a more recent version of elog. With 2.6.2-3 I get for example
|
I downloaded the latest version just yesterday. I checked again now; it is version 2.6.2-3. I'll wait some time for release of new build of windows binaries. Mine differs from yours as a one build number only.
Thanks for prompt answer. |
|
Re: Error Sending Email, posted by Ibrahim Genc on Fri Oct 13 23:17:05 2006
|
| Stefan Ritt wrote: |
| Ibrahim Genc wrote: | | I get error message after submitting a message |
Your verbose output seems to be only partial. I have modified the verbose output recently, so please update to a more recent version of elog. With 2.6.2-3 I get for example
Email from stefan.ritt@psi.ch to stefan.ritt@psi.ch, SMTP host xxx.psi.ch:
...
|
Now I installed 262-4 but no change. communication seems to be stopped at the same point.
| Stefan Ritt wrote: |
This is of course without SMTP username. Our mail server does not support SMTP username, so I programmed this kind of "blindly".
|
There is a free e-mail service at mail.softhome.net. It provides smtp and pop3 services. You can use this for testing if you want.
Saluts.
--
ibrahim |
Re: Date format in Threaded display, posted by Ibrahim Genc on Tue Oct 17 13:03:22 2006
|
| deletoille wrote: | hello,
Time format = %d/%m/%Y, %T
Thanks in advance |
I think "date format" and "time format" are different tags.
you may try to use date format here. |
|
Reverse proxy setting of Elog for Apache httpd 2.4 so that changing password windows works ?, posted by Takashi Ichihara on Tue Mar 19 06:13:03 2019
|
In CentOS 7.6 + Apache httpd-2.4.6 + ELOG V3.1.4 environment with Reverse Proxy setting of
/etc/httpd/conf/httpd.conf
:
ProxyRequests Off
RedirectMatch ^/elog$ /elog/
<Location /elog/>
ProxyPass http://mmm.riken.jp:3333/
ProxyPassReverse http://mmm.riken.jp:3333/
ProxyPassReverseCookiePath / /elog/
</Location>
:
It almost works fine. But Changing password has problem.
When clicking the "Forget password?" link in login window and displaying "Entering your user name or email address"
and entering it, an email is sent to the user:
----
This is an automatically generated account recovery email for host mmmm.riken.jp.
Please click on following link to recover your account:
http://mmm.riken.jp/elog/?redir=%3Fcmd%3DChange+password%26oldpwd%3DIHCPHXNTMJGEYDKY&uname=test&upassword=IHCPHXNTMJGEYDKY
ELOG Version 3.1.4
---
Clicking the URL above in the Firefox Browser results invalid URL:
http://mmm.riken.jp/?cmd=Change%20password&oldpwd=IHCPHXNTMJGEYDKY
These parameters does not pass to the elog by the Reverse Proxy setting above.
While accessing the URL of (native elog port: 3333)
http://mmm.riken.jp:3333/?cmd=Change%20password&oldpwd=IHCPHXNTMJGEYDKY
displays the normal page for Changing password windows for the user.
Is there any suggestions for the Reverse Proxy setting in Apache httpd 2.4
so that the changing password windows works fine ?
Thank you for any suggestions. |