ELOG Forum

Thanks Stefan,

When implemented there seems to be a finite number of characters that are visible under a tool tip, is this an OS defined limit or something that can be changed?

ELOG itself has a limit of 256 characters, but that can be changed easily. I found that Mozilla Firefox only showed 70 characters and then three dots ("..."), while Internet Explorer showed all 256 characters, wrapping words if necessary. So it strongly depends on the browser.

Hi Stefan,

Many thanks for implementing this feature, it is very useful and works very well, I can't seem to get the Tooltips to show up using the 'ROptions' (radio buttons) though? Could you check if it is available for this please?

Thx

2121

Thu Jan 18 20:19:22 2007

Re: Synchronization using https

Alexandre Lindote wrote:

Now we want to have several servers set up (in different institutions), and have them synchronized automatically.

Synchronization works such that the "client" elogd (the one on which the synchronization is started) "emulates" a browser and accesses the other elogd server. Since SSL is not built into elogd, it can only use the http protocol, not https. If you want secure synchronization, the only chance you have is to make a SSH tunnel on which you run the http protocol for synchronization.

2120

Thu Jan 18 16:29:43 2007

Synchronization using https

Hi,

I have an elog server running on a linux desktop machine inside our institutional firewall. It can be accessed from inside the firewall directly using http, but users from outside have to use https, with apache (and its ssl module) controlling the access.
I also set up another server on my laptop, just for backup purposes, and synchronized it inside the firewall (using a direct http connection). No problems there!
Now we want to have several servers set up (in different institutions), and have them synchronized automatically. For this I installed elog on a mac server (in another institution, so outside our firewall), also accessible only through https (again using apache).
I configured all the required mirror settings, but always get an error: "Remote server is not an ELOG server".
I've tried changing the status of the 2 machines (server-client), but get the same error...
I also tried different approaches for the Mirror server parameter, like
https://the.remote.server
https://the.remote.server:443
http://the.remote.server:443
but no luck...

Running elog with the -D flag off issued this message:

Quote:

HTTP/1.1 401 Authorization Required
Date: Thu, 18 Jan 2007 15:22:10 GMT
Server: Apache/1.3.33 (Darwin) DAV/1.0.3 mod_ssl/2.8.24 OpenSSL/0.9.7l
WWW-Authenticate: Basic realm="zeplin2"
Connection: close
Content-Type: text/html; charset=iso-8859-1

Authorization Required

This server could not verify that you
are authorized to access the document
requested. Either you supplied the wrong
credentials (e.g., bad password), or your
browser doesn't understand how to supply
the credentials required.

Apache/1.3.33 Server at shalott.pp.rl.ac.uk Port 80

The servers have user level passwords, and I'm mirroring with Mirror user parameter set to the administrator...
Any ideas?

Thanks in advance

Alex

2119

Wed Jan 17 13:33:27 2007

Re: Two different attributes with the same list

deletoille wrote:

Do I have to program the list for "Equipement Impacté" or is there a simple command to say that "Equipement incrimé" and "equipement inpacté" have the same list?

Ok, now I understand. No, there is no simple way, you have to specify both lists explicitly. But it's just a copy and paste in your editor Wink

By the way, have you discovered Google Translate? Like http://translate.google.com/translate?u=http%3A%2F%2Fmidas.psi.ch%2Felogs%2FForum%2F2115&langpair=en%7Cfr
Not perfect, but readable. I know a Korean and a Japanese guy who do not speak English but talk to each other via email with this automatic translation tool Korean->English->Japanese and back. Amazing.

2118

Wed Jan 17 13:27:46 2007

deletoille

xavier.deletoille@synchrotron-soleil.fr

Question

Linux | Windows

2.6.3-1762

Re: Two different attributes with the same list

Stefan Ritt wrote:

deletoille wrote:

In this picture of my project, All the attributes included in the red circle are the same except the names of the attribute “Equipement Incriminé” and “Equipement impacté”.
“Equipement Incriminé” and “Equipement impacté” have the same list.

The displayed list for the both attributes is the multiple conditions result coming from the choice of “groupe incriminé or impacté, sous ensemble, selection, and localisation”.

So if I have to program the list twice, it will be twice bigger.

Do I need to program the same list twice for the two attributes or is there a simple command to say that the two precedent attributes are equal?

I don't understand your problem. The picture you attached, was this some ELOG output (it looks very different than the usual one...)? Do mean you have two attributes with the same "Options <attribute> = ...,..,.." list? With "multiple conditions" you mean that you do a search in ELOG with a condition one one attribute, but in the filter list both attributes having the same option list are shown. Is this correct? What section of the configuration file are you talking about?

Best regards

Stefan

I'm soory, i'm very poor in english.

Here is a very small part of my program:

{AE&Anneau&Panne} Moptions Défaut = Flowmeter or Door meter, Communication, Earth, IAC, Driver, Temp. Ambiant, Phase, Cooling Water, Overvoltage, OverCurrent, Sample Card, Ripple, EEPROM, Autres
{AE&Anneau&Gr} Moptions Equipement incriminé = Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, QT, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, Alim correcteurs H., Alim correcteurs V., alim. Dipole, Alim Q., Alim S.
{AE&Anneau&Se&C01} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C02} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.2-CH, S8.2-QT, S9.1-CV, S9.2-CV, S10.1-CH, S10.1-QT, S10.2-CH, COR.
{AE&Anneau&Se&C03} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.1-QT, S8.2-CH, S9.1-CV, S9.2-CV, S10.1-CH, S10.2-CH, S10.2-QT, COR.
{AE&Anneau&Se&C04} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C05} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C06} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.2-CH, S8.2-QT, S9.1-CV, S9.2-CV, S10.1-CH, S10.1-QT, S10.2-CH, COR.
{AE&Anneau&Se&C07} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.1-QT ,S8.2-CH, S9.1-CV, S9.2-CV, S10.1-CH, S10.2-CH, S10.2-QT, COR.
{AE&Anneau&Se&C08} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C09} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C10} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.2-CH ,S8.2-QT, S9.1-CV, S9.2-CV, S10.1-CH, S10.1-QT, S10.2-CH, COR.
{AE&Anneau&Se&C11} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.1-QT, S8.2-CH, S9.1-CV, S9.2-CV, S10.1-CH, S10.2-CH, S10.2-QT, COR.
{AE&Anneau&Se&C12} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C13} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.
{AE&Anneau&Se&C14} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.2-CH, S8.2-QT, S9.1-CV, S9.2-CV, S10.1-CH, S10.1-QT, S10.2-CH, COR.
{AE&Anneau&Se&C15} Moptions Equipement incriminé = QA, Q6.1, Q7.1, Q8.1, Q9.1, Q10.1, QB, Q6.2, Q7.2, Q8.2, Q9.2, Q10.2, S7.1-CV, S7.2-CV, S8.1-CH, S8.1-QT, S8.2-CH, S9.1-CV, S9.2-CV, S10.1-CH, S10.2-CH, S10.2-QT, COR.
{AE&Anneau&Se&C16} Moptions Equipement incriminé = QA, Q1, Q2, Q3, Q4.1, Q5.1, QB, Q4.2, Q5.2, Q6, Q7, Q8, S1-CH, S1-QT, S2-CV, S4-CH, S4-CV, S4-QT, S5-CV, S6-CH, COR.

Do I have to program the list for "Equipement Impacté" or is there a simple command to say that "Equipement incrimé" and "equipement inpacté" have the same list?

Thanks in advance
Xavier Deletoille

2117

Wed Jan 17 12:55:07 2007

Stefan Ritt

stefan.ritt@psi.ch

Question

Re: How many topgroups can be defined?

Exaos Lee wrote:

I defined 6 top groups in my cfg file as the attachment.
But ... It doesn't work as I wanted.
The 4th and 5th groups need login. But when I clicked the 4th or 5th group, the login isn't needed.
And the 4th and 5th password files are not generated automatically.

When changing groups and to groups, one can sometimes get fooled by old cookies. Delete all your cookies and try again. You can also install the "Tamper Data" extension for Firefox (https://addons.mozilla.org/firefox/966/) which shows you which cookies are sent to your ELOG server. This should reveal the problem.

2116

Wed Jan 17 12:49:25 2007

Re: Two different attributes with the same list

deletoille wrote: