Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 554 of 808  Not logged in ELOG logo
ID Date Icon Author Author Email Categorydown OS ELOG Version Subject
  67705   Wed Sep 17 17:45:18 2014 Idea Andreas Luedekeandreas.luedeke@psi.chInfoAll V2.9.2-24Re: Sort by date prior to 2002

Chris Jennings wrote:

Chris Jennings wrote:

I have an attribute formatted as a date (but not labeled as date) and is sorted as second priority. The sort works fine until I enter a date older than Jan 1st 2002. When I do this it is sorted as the latest. Is this a bug or simply not designed to use dates this old?

Thanks in advance,

Chris

 Sorry, my mistake. The cutoff date is anything before September 9th 2001 does not sort.

I think I remember that this has been discussed earlier: it is a little bug in elogd.
You can see where it comes from if you type in the little command 'date -d "9-Sep-2001 3:46:40" +%s'
Converted to "seconds of the epoche" (seconds since 1970-01-01 00:00:00 UTC) the date "9-Sep-2001 3:46:40" has one digit more than "9-Sep-2001 3:46:39".
Since elog makes a string comparison, suddenly 1'000'000'000 is less than 999'999'999; therefore the wrong sorting.

Workaround: you can modify your old entries and add a leading zero to all entries where your specific date field starts with a '9'.

Stefan: you should fix it at least well before 20-Nov-2286 18:46:40, when the same bug strikes again!
  67706   Mon Sep 22 14:39:10 2014 Reply Stefan Rittstefan.ritt@psi.chInfoAll V2.9.2-24Re: Sort by date prior to 2002

Andreas Luedeke wrote:

Chris Jennings wrote:

Chris Jennings wrote:

I have an attribute formatted as a date (but not labeled as date) and is sorted as second priority. The sort works fine until I enter a date older than Jan 1st 2002. When I do this it is sorted as the latest. Is this a bug or simply not designed to use dates this old?

Thanks in advance,

Chris

 Sorry, my mistake. The cutoff date is anything before September 9th 2001 does not sort.

I think I remember that this has been discussed earlier: it is a little bug in elogd.
You can see where it comes from if you type in the little command 'date -d "9-Sep-2001 3:46:40" +%s'
Converted to "seconds of the epoche" (seconds since 1970-01-01 00:00:00 UTC) the date "9-Sep-2001 3:46:40" has one digit more than "9-Sep-2001 3:46:39".
Since elog makes a string comparison, suddenly 1'000'000'000 is less than 999'999'999; therefore the wrong sorting.

Workaround: you can modify your old entries and add a leading zero to all entries where your specific date field starts with a '9'.

Stefan: you should fix it at least well before 20-Nov-2286 18:46:40, when the same bug strikes again!

Ok, well before 2286 approaches I fixed that bug and committed it to the GIT repository (master branch).

/Stefan 

  67716   Fri Nov 21 12:38:07 2014 Entry harish aminharish.amin@holiday.co.omInfoWindows2.85.5.4 cannot decode AUTH parameter

 Dear Team,

I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error sending Email via "smtp.omantel.net.om": 5.5.4 cannot decode AUTH parameter

The details are as below : (Please note I have replaced the password with the * marks)

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} NEW entry #0

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} Email from <harish.amin@holiday.co.om> to harish.amin@holiday.co.om, SMTP host smtp.omantel.net.om

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 220 fmgw1.omantel.net.om ESMTP Smtpd; Fri, 21 Nov 2014 15:32:52 +0400

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} EHLO localhost

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-fmgw1.omantel.net.om Hello [188.66.222.72], pleased to meet you

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-ENHANCEDSTATUSCODES

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-PIPELINING

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-8BITMIME

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-SIZE 32235520

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DSN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-AUTH LOGIN PLAIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-STARTTLS

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DELIVERBY

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250 HELP

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} AUTH LOGIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Username

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} harish.amin@holiday.co.om

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Password

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} ******

21-Nov-2014 16:58:30 [harish@127.0.0.1] {SCREENING VISIT} 501 5.5.4 cannot decode AUTH parameter ******

Please help me to resolve this issue.

Thank you

Harish Amin

  67717   Fri Nov 21 16:09:37 2014 Reply Stefan Rittstefan.ritt@psi.chInfoWindows2.8Re: 5.5.4 cannot decode AUTH parameter

harish amin wrote:

 Dear Team,

I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error sending Email via "smtp.omantel.net.om": 5.5.4 cannot decode AUTH parameter

The details are as below : (Please note I have replaced the password with the * marks)

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} NEW entry #0

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} Email from <harish.amin@holiday.co.om> to harish.amin@holiday.co.om, SMTP host smtp.omantel.net.om

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 220 fmgw1.omantel.net.om ESMTP Smtpd; Fri, 21 Nov 2014 15:32:52 +0400

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} EHLO localhost

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-fmgw1.omantel.net.om Hello [188.66.222.72], pleased to meet you

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-ENHANCEDSTATUSCODES

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-PIPELINING

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-8BITMIME

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-SIZE 32235520

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DSN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-AUTH LOGIN PLAIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-STARTTLS

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DELIVERBY

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250 HELP

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} AUTH LOGIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Username

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} harish.amin@holiday.co.om

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Password

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} ******

21-Nov-2014 16:58:30 [harish@127.0.0.1] {SCREENING VISIT} 501 5.5.4 cannot decode AUTH parameter ******

Please help me to resolve this issue.

Thank you

Harish Amin

 For the login to your email sever, the password is encoded in base64 form (actually not really secure). Somehow your server does not support this. Unfortunately I cannot test this without access to your server. But you can try yourself by doing a telnet to your mail server like:

$ telnet <server.domanin> 25

...

$ AUTH PLAIN

With the "plain" method, you should be able to enter your password in plain text (not base64 encoded), and see if that works. If you are successful, I can add this option to elog.

Best,

Stefan

  67718   Fri Nov 21 17:00:09 2014 Reply harish aminharish.amin@holiday.co.omInfoWindows2.8Re: 5.5.4 cannot decode AUTH parameter

Stefan Ritt wrote:

harish amin wrote:

 Dear Team,

I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error sending Email via "smtp.omantel.net.om": 5.5.4 cannot decode AUTH parameter

The details are as below : (Please note I have replaced the password with the * marks)

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} NEW entry #0

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} Email from <harish.amin@holiday.co.om> to harish.amin@holiday.co.om, SMTP host smtp.omantel.net.om

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 220 fmgw1.omantel.net.om ESMTP Smtpd; Fri, 21 Nov 2014 15:32:52 +0400

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} EHLO localhost

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-fmgw1.omantel.net.om Hello [188.66.222.72], pleased to meet you

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-ENHANCEDSTATUSCODES

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-PIPELINING

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-8BITMIME

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-SIZE 32235520

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DSN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-AUTH LOGIN PLAIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-STARTTLS

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DELIVERBY

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250 HELP

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} AUTH LOGIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Username

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} harish.amin@holiday.co.om

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Password

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} ******

21-Nov-2014 16:58:30 [harish@127.0.0.1] {SCREENING VISIT} 501 5.5.4 cannot decode AUTH parameter ******

Please help me to resolve this issue.

Thank you

Harish Amin

 For the login to your email sever, the password is encoded in base64 form (actually not really secure). Somehow your server does not support this. Unfortunately I cannot test this without access to your server. But you can try yourself by doing a telnet to your mail server like:

$ telnet <server.domanin> 25

...

$ AUTH PLAIN

With the "plain" method, you should be able to enter your password in plain text (not base64 encoded), and see if that works. If you are successful, I can add this option to elog.

Best,

Stefan

 Dear Stefan

Thank you for your reply. Please check is my entry correct?

port = 8080

Admin user = harish

url = http://localhost:8080

;Find Menu commands = Logout, New, Find, Select, Config, Last day, Last 10, Help

;Guest Menu commands = Login, Back, Find, Last day, Last 10, Help, Logout

;Guest Find Menu commands = Login, Back, Find, Last day, Last 10, Help

SMTP host = smtp.omantel.net.om

SMTP port = 25

$telnet smtp.omantel.net.om 25

$AUTH PLAIN

SMTP username = harish.amin@holiday.co.om

SMTP Password = ********

Subst Email = $user_email

Logfile = errorh.log

Email Encoding = 4

Entries per page = 50

;Logfile = harish.log

;Logging level = 2

  67719   Sat Nov 22 14:50:35 2014 Reply harish aminharish.amin@holiday.co.omInfoWindows2.8Re: 5.5.4 cannot decode AUTH parameter

harish amin wrote:

Stefan Ritt wrote:

harish amin wrote:

 Dear Team,

I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error sending Email via "smtp.omantel.net.om": 5.5.4 cannot decode AUTH parameter

The details are as below : (Please note I have replaced the password with the * marks)

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} NEW entry #0

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} Email from <harish.amin@holiday.co.om> to harish.amin@holiday.co.om, SMTP host smtp.omantel.net.om

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 220 fmgw1.omantel.net.om ESMTP Smtpd; Fri, 21 Nov 2014 15:32:52 +0400

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} EHLO localhost

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-fmgw1.omantel.net.om Hello [188.66.222.72], pleased to meet you

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-ENHANCEDSTATUSCODES

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-PIPELINING

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-8BITMIME

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-SIZE 32235520

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DSN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-AUTH LOGIN PLAIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-STARTTLS

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DELIVERBY

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250 HELP

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} AUTH LOGIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Username

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} harish.amin@holiday.co.om

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Password

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} ******

21-Nov-2014 16:58:30 [harish@127.0.0.1] {SCREENING VISIT} 501 5.5.4 cannot decode AUTH parameter ******

Please help me to resolve this issue.

Thank you

Harish Amin

 For the login to your email sever, the password is encoded in base64 form (actually not really secure). Somehow your server does not support this. Unfortunately I cannot test this without access to your server. But you can try yourself by doing a telnet to your mail server like:

$ telnet <server.domanin> 25

...

$ AUTH PLAIN

With the "plain" method, you should be able to enter your password in plain text (not base64 encoded), and see if that works. If you are successful, I can add this option to elog.

Best,

Stefan

 Dear Stefan

Thank you for your reply. Please check is my entry correct?

port = 8080

Admin user = harish

url = http://localhost:8080

;Find Menu commands = Logout, New, Find, Select, Config, Last day, Last 10, Help

;Guest Menu commands = Login, Back, Find, Last day, Last 10, Help, Logout

;Guest Find Menu commands = Login, Back, Find, Last day, Last 10, Help

SMTP host = smtp.omantel.net.om

SMTP port = 25

$telnet smtp.omantel.net.om 25

$AUTH PLAIN

SMTP username = harish.amin@holiday.co.om

SMTP Password = ********

Subst Email = $user_email

Logfile = errorh.log

Email Encoding = 4

Entries per page = 50

;Logfile = harish.log

;Logging level = 2

 Dear Stefen,

Please help me & reply on my request. Is my global config correct?

  67720   Sat Nov 22 16:05:34 2014 Reply Yoshio Imai$user_emailInfoWindows2.8Re: 5.5.4 cannot decode AUTH parameter

harish amin wrote:
Dear Stefen,
Please help me & reply on my request. Is my global config correct?


I am afraid you misunderstood Stefan. The lines he suggested to you are not something to put into your config file, but something you have to type on the command prompt in order to communicate directly with the mail server (i.e. completely independent from elog). You may have to ensure that the necessary communication program is installed on your computer.

Regards

Yoshio
  67837   Wed Mar 25 10:36:15 2015 Entry Tim Scheltim.schelfhout@fixbrussel.beInfoLinux | Windows3.00test

zezerze

ELOG V3.1.5-3fb85fa6