Hi All, 

 maybe I missed something in the configuration, but how do I get this nice editor for HTML like the one available on this forum?

Thanks a lot for advice.

I upgraded my system, including the version of Firefox.

I normally view the topic in Threaded Collapsed mode, right click on the entry I want to reply to, to open a new
Tab.  However, I made a mistake an opened a new Window, as the two 'open' modes in Firefox swapped around.
But no worry, I thought, made my reply as usual.

However, when refreshing the topic afterwards, seemingly randomly distributed throughout the topic were
additional lines, with the latest entry showing up emboldened (but not as a clickable link), and the only
difference being the ID number which showed as 0 (zero).

Deleting the reply only caused the previous reply to show up randomly etc.

In effect, the latest entry is (randomly?) scattered throughout the topic - even in between entries older than
any in that thread, so it's not individial entries in that thread showing up.

The only way to get rid of it was to erase the whole directory, and re-install from backup (which, as it was the
first entry since the new installation, wasn't painful).  It's been fine since - but only so long as I open a
thread in a new tab, and not in a new Window.

I guess the real question is just what is added to some file - perhaps the .cfg file? - that using a separate
window causes this behavioir?  Any whay only as a new window, and given how elog is supposed to work on many
computers, why on this stand-alone computer running two sets of the same browser?

It happened once before at the end of last year during a regression backwards owing to the newer computer
failing and turning back to an older one with older OS and older firefox, where I did the same thing (in
reverse).  As I didn't investigate at that time, I still have the mystery line showing up in that topic.

Sorry this is a bit rambling, but its very hard to describe!

 We have multiple logbooks. Each user is admin user for his/her own logbook. 

I want user be able to modify config file, but no access to user setting, such as see user list, change password, new user, remove user. 

[logbook1]
Admin user = user1
Login user = user1, user2
Allow Config = user1
List Menu commands = Admin, Config

user1 click on Admin, it opens config file, when user1 click on save, user1 is brought to Config page, which has select user list on top, Change password, Remove user, New user buttons on bottom. Is there a way that admin user has access to config file, but no access to user info at all (not even presented to them).  Is there a way after user1 click save, page doesn't go to that config page?

I could put 
Deny Change password =
Deny Remove user
Deny New user

so when user1 click on those buttons, user1 will get command not allowed. However I would rather have user1 not even see that page. 

Hi,

Is it possible to disable the Previewbutton?

Regards
Ulf Olsson

I was wondering if anyone out there has had any success with importing XML data into ELOG. Using the XML schema which I derive from the EXPORT data from ELOG into XML format or creating the file from scratch, I either blowup the system and have to restart elogd or it doesn't work and says, XML file doesn't contain ELOG_LIST element (which I create and it still doesn't work).

Basically, I am trying to take spreadsheet data, convert it into XML and upload it as a logbook so I don't have to perform lots of data entry. I also tried .CSV but have had no luck. 

Any thoughts or ideas? 

Hi,

Why is the color of an inputfield changing when I have changed the size and width?

I have attached a example.

Regards
/UlfO

 Hi, I have a question regarding the Protect Selection option. I have the option enabled and I have to login to get into the logbook. What I would like to accomplish is that the page does not display anything (none of the posts) when it is opened. The only option should be to login.

Is this possible?

Regards,

John

Bonjour,

tout est dans le titre.

Merci

For those who speak strange languages, I asked how to get a french version of elog.

By the way, this is my second mail because I forgot to give an icon to the first mail, and when I hit Back to do so, my text was erased. Bug or normal obnoxious attitude of my browser ?

Thanks in advance

Philippe