> I was just wondering if it is possible to define what logbooks you want
> mirrored in the [Global] part of the elogd.conf file.

I added a new option

Mirror exclude = 1

which has to be put into the individual logbook section (not the [global] one).
The modification will be contained in the next release.

> > I was just wondering if it is possible to define what logbooks you want
> > mirrored in the [Global] part of the elogd.conf file.
> 
> I added a new option
> 
> Mirror exclude = 1
> 
> which has to be put into the individual logbook section (not the [global] one).
> The modification will be contained in the next release.

Thank you very much Stefan.

I implemented experimentally RSS feeds into Elog. Before releasing this new
addition, I would like to collect some experience with it. This forum now
supports RSS feeds, for which you can subscribe with a RSS feed reader like
Mozilla Firefox. Please give it a try and send me any feedback.

For an introduction to RSS feeds, please see 

http://www.webreference.com/authoring/languages/xml/rss/intro/

To subscribe to a logbook, enter following URL into your RSS reader:

http://<your-elog-host.domain>/<logbook>/elog.rdf

From the newest Mozilla Firefox browser, you can also click on the RSS box at
the lower right corner of the browser (see attachment).

1.

I do not know if this is a problen of the 2.5.5 (11/03/04) version or of
other versions as well:

I'm using the $message id parameter in a substitution:
Subst KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
Geschäft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [<a
href="http://localhost:8080/$logbook/$message id">$logbook:$mesage id</a>]

the "$message id" will not be replaced by the msg id, the string "$message
id"  will be dispalyed and used. Other substitutions as $logbook etc. are
working.

Is this a bug or did i missunderstood the manual?


2.

Since Version 2.5.5: If ELOG is running under German, the "Zurück" Bottom is
named "Back". Any Idee where I can change this back?  ;-)

2.5.4-6 was corretly translated.

> the "$message id" will not be replaced by the msg id, the string "$message
> id"  will be dispalyed and used. Other substitutions as $logbook etc. are
> working.
> 
> Is this a bug or did i missunderstood the manual?

Well, the manual does not state that "$message id" should work for "Subst
<attribute>" option (;-)

The reason is that the message ID is available only *after* a new entry has been
written to the database, and the "Subst" command is evaluated *before* an entry
is submitted. "$message id" only works for "Thread display", "RSS Title", "Subst
on reply", "Subst on edit" and "Display". You should use

Display KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
Geschaft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [<a
href="http://localhost:8080/$logbook/$message id">$logbook:$message id</a>]

Please note that you wrote "mesage id", correct is however "message id" (two
"s"), so there is also a typo.

> Since Version 2.5.5: If ELOG is running under German, the "Zurück" Bottom is
> named "Back". Any Idee where I can change this back?  ;-)

The link "Back" has been replaced upon request by "List" which is more
appropriate. So if you changed your menu with "Menu commands = ...", please
replace "Back" by "List" there.

1. thats now clear with the £message id and the work-around is ok for my 
needs

2. the "bacl" link is clear and tranlated to "Liste". But I mean the back 
button 
in the entry and the edit mode (see picture)...  ;-)

> > the "$message id" will not be replaced by the msg id, the 
string "$message
> > id"  will be dispalyed and used. Other substitutions as $logbook etc. 
are
> > working.
> > 
> > Is this a bug or did i missunderstood the manual?
> 
> Well, the manual does not state that "$message id" should work for "Subst
> <attribute>" option (;-)
> 
> The reason is that the message ID is available only *after* a new entry 
has been
> written to the database, and the "Subst" command is evaluated *before* 
an entry
> is submitted. "$message id" only works for "Thread display", "RSS 
Title", "Subst
> on reply", "Subst on edit" and "Display". You should use
> 
> Display KlientIn/KundIn = $Vorname $Name; P: $Telefon Privat; G: $Telefon
> Geschaft; N: $Telefon Mobil; $Landeskennung-$PLZ $Ortschaft [<a
> href="http://localhost:8080/$logbook/$message id">$logbook:$message 
id</a>]
> 
> Please note that you wrote "mesage id", correct is however "message id" 
(two
> "s"), so there is also a typo.
> 
> > Since Version 2.5.5: If ELOG is running under German, the "Zurück" 
Bottom is
> > named "Back". Any Idee where I can change this back?  ;-)
> 
> The link "Back" has been replaced upon request by "List" which is more
> appropriate. So if you changed your menu with "Menu commands = ...", 
please
> replace "Back" by "List" there.

> 2. the "bacl" link is clear and tranlated to "Liste". But I mean the back 
> button 
> in the entry and the edit mode (see picture)...  ;-)

Well, if you try with the demo logbook, the "Back" button is translated
correctly, so I don't know whats wong in your case. Can you check that your
eloglang.german file is intact?

installed elog 2.5.5 agin, same effekt with "back" / "zurück". checked the 
language file eloglang.german witch seem ok for me and the translations are 
well done. removed then in eloglang.germen the traslation for back and checked 
this: still back was viewed. reinserted the translation "Zurück" (just this 
word!)and checked again: everithing looks fine, no longer back, correctly 
Zurück on the button.
absolutly no idea why and whats the difference was! bus it works...
thank's stefan!  :-)

> > 2. the "back" link is clear and tranlated to "Liste". But I mean the back 
> > button 
> > in the entry and the edit mode (see picture)...  ;-)
> 
> Well, if you try with the demo logbook, the "Back" button is translated
> correctly, so I don't know whats wong in your case. Can you check that your
> eloglang.german file is intact?