| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
987
|
Wed Mar 16 22:14:19 2005 |
 | Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 2.5.7 | Re: Can't use the command-line client | > There is a read password ("Read Password=..." entry in elogd.cfg) on
> the logbook which I cannot bypass from the client.
This is correct. The elog utility works with write passwords and user level access
(specifying a password file), but not with read passwords, that's not implemented. Use a
password file and you should be fine.
> There is a required attribute called "Publiek", and it's defined as
> MOptions. Whenever I try to upload, I keep getting the message that
> it misses this attribute.
Your problem is that you try to combine a MOptions with a "-r <n>" (reply-to) option. I
have never tried that and found there is a problem. I changed the way MOptions are
submitted. Instead of using <name>_0, <name>_1 etc, you can now do a
-a "<attrib>=<value1> | <value2>"
This also solves the problem with the "-r" option. You have to upgrade elogd.c from CVS. |
|
986
|
Wed Mar 16 20:04:32 2005 |
 | Pieter Edelman | elog@pde.slimblondje.nl | Question | Linux | 2.5.7 | Can't use the command-line client | Hi all,
I'm trying to use the command-line client from linux, but I can't make it
work and that's driving me nuts...
What I want is to reply to a selected message in the logbook, but I
stumble onto two problems:
- There is a read password ("Read Password=..." entry in elogd.cfg)on
the logbook which I cannot bypass from the client. Specifying the switch
-u "" password on the command line has no effect, and neither does
-w password. The error message I get is included at the bottom of this message. If I disable the
read password, I get past the authentication.
- There is a required attribute called "Publiek", and it's defined as
MOptions. Whenever I try to upload, I keep getting the message that it misses this attribute. I
tried the switch -a Publiek=Anders, -a "Publiek=Anders", -a
Publiek_0=Anders, -a "Publiek_0=Anders" -a "Publiek_1=Onbekend,
-a Publiek=1 on the beginning, end, and middle of the command, but
the results are the same. Both "Anders" and "Onbekend" are in the MOptions
list (including capitals).
For completeness, here's (one variety) of my command line:
elog -a "Publiek=1" -h localhost -p 8181 -l Artikelen -v -r 80
The obvious question is if anybody knows what I'm doing wrong. Any help
is greatly appreciated.
Pieter
Authentication error:
Successfully connected to host localhost,
port 8181
Request sent to host:
GET /Artikelen/80?cmd=download HTTP/1.0
Host: pde.dyndns.org
User-Agent: ELOG
Cookie: upwd=bWFOZGFyaWpO;
Response received:
HTTP/1.1 401 Authorization Required
Server: ELOG HTTP 2.5.7-1
WWW-Authenticate: Basic realm="Artikelen"
Connection: close
Content-Type: text/html
<HTML><HEAD>
<TITLE>401 Authorization Required</TITLE>
</HEAD><BODY>
<H1>Authorization Required</H1>
This server could not verify that you
are authorized to access the document
requested. Either you supplied the wrong
credentials (e.g., bad password), or your
browser doesn't understand how to supply
the credentials required.
</BODY></HTML>
Error transmitting message
Missing attribute error
Successfully connected to host localhost, port 8181
Request sent to host:
POST /Artikelen/ HTTP/1.0
Content-Type: multipart/form-data; boundary=---------------------------75ABFDB1E
CB47273B853CE0
Host: pde.dyndns.org
User-Agent: ELOG
Content-Length: 3651
Content sent to host.
Response received:
HTTP/1.1 200 Document follows
Server: ELOG HTTP 2.5.7-1
Content-Type: text/html;charset=ISO-8859-1
Connection: Keep-Alive
Keep-Alive: timeout=60, max=10
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html><head><title>ELOG error</title>
<link rel="stylesheet" type="text/css" href="default.css">
<link rel="shortcut icon" href="favicon.ico">
<link rel="icon" href="favicon.png" type="image/png">
</head>
<body><center>
<table class="dlgframe" width="50%" cellpadding=1 cellspacing=0<tr><td
class="er
rormsg"><i>Error: Attribute <b>Publiek</b> not
supplied.</i><p>
Please go back and enter the <b>Publiek</b> field.
</td></tr>
<tr><td class="errormsg">Please use your browser's back button to go back
</td></tr>
</table>
</center></body></html>
Error: Missing required attribute "Publiek"
|
|
985
|
Wed Mar 16 16:13:15 2005 |
 | Alex H | alex@synergie-inf.com | | Windows | V2.5.7-1 | Expand all at elog home | Hi,
Is there a command line in the configuration files to show all of sub logs
on the main page of elog instead of clicking on "Expand All" on the top of
ELOG ?
Thanks |
|
984
|
Tue Mar 15 14:11:48 2005 |
| Alex H | alex@synergie-inf.com | Question | Windows | 2.5.7-1 | Re: Non clickable column | > > I talk about the column contents. In fact on ELOG, we store password so its
> > more easyer to click twice on it to select them and after to copy them instead
> > of select from right to left the password and to try to copy them. The HMTL
> > link gave problem, its more hard to copy data from HTML link than an normal TXT.
> > A little hard to explain sorry for my mistakes and explication I'm French :o).
>
> I added a new option "Link display = ...", with which you can restrict the number of
> attribues which gets a HTML link. If you put
>
> Link display = ID, Author
>
> then only the ID column and the colum with the Author are shown as HTML links, all
> other are shown as simple text.
>
> The new version is under CVS. This option will be included in the next release.
Great news :) !
thanks a lot ! |
|
983
|
Mon Mar 14 21:56:15 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | 2.5.7-1 | Re: Non clickable column | > I talk about the column contents. In fact on ELOG, we store password so its
> more easyer to click twice on it to select them and after to copy them instead
> of select from right to left the password and to try to copy them. The HMTL
> link gave problem, its more hard to copy data from HTML link than an normal TXT.
> A little hard to explain sorry for my mistakes and explication I'm French :o).
I added a new option "Link display = ...", with which you can restrict the number of
attribues which gets a HTML link. If you put
Link display = ID, Author
then only the ID column and the colum with the Author are shown as HTML links, all
other are shown as simple text.
The new version is under CVS. This option will be included in the next release. |
|
982
|
Mon Mar 14 21:11:11 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | All | rev. 1.51 | Re: Display <attribute> do erroneously encoded | >
> Display subject = <b>$subject</b>
>
> is printed to the browser encoded, so that it is diplayed as is..
I fixed that in revision 1.587. Note however that you should do the formatting
of attributes better using the CSS functionality, since it gives you more
possibilities. See for example the subject of this forum, which has it's own
CSS class "subjname", which has a larger font size. You select your own class like
Format Subject = 0, subjname, subjvalue
in the configuration file. Then add the classes into the CSS file.
Now elog shows each attribute which contains a "<b>" encoded (as HTML). But if you
want to write a subject line like "For bold use <b> in HTML", then the "<b>"
triggers the HTML display, so it is not written as is, which is not what you want in
that case. Since there is no switch "Submit as HTML text" for the attributes, it is
hard for elog to "guess" if you want HTML encoded or not. |
|
981
|
Mon Mar 14 21:00:57 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | | | | Re: 2 Extendable options when created new entries | I fixed this problem in revision 1.586. It will be contained in the next release. |
|
980
|
Wed Mar 9 10:17:51 2005 |
| T. Ribbrock | emgaron@gmx.net | | | | Trying to get "Format <attribute>" to work | I am currently trying to get some attributes into one line in my logbook,
with some others on a line of their own (this is on the single message page)
- pretty much like in this forum.
I searched through the forum and the config examples and found
elog:571 as well as elog:Config+Examples/4, but I cannot get it
to work.
In the forum, the "Subject:" line is on its own line and fills the whole
line, which is what I want. In my logbook, the equivalent attribute does
stand on its own line, but the 'value' only fills the space of the second
column (i.e., if it was in this forum, the 'value' of "Subject" would be the
same width as the icon above it and the rest of the line just blank).
As far as I can see, I'm using the "Format <attribute>=1" statements in the
same way as in the example - and when I compare the resulting HTML, it also
looks the same. I did notice, however, that you use different CSS classes
for "Subject" and its value. Hence my question: To get "Subject" and its
value to stretch over the full line, is there some fancy CSS footwork
involved? I was not able to find the CSS file for this forum among the
configuration examples - maybe you could add it?
Thanks in advance! |
|