Hello to @all

First please let me say that I'm a complete green-horn when it comes to linux

I'm running elog on a linux virtual server and would like to use kerberos authentication. If I set 'Authentication = Kerberos' in the elogd.cfg file I get,


If I set 'Authentication = Kerberos, File' it works fine. I hope this is just some error on my part.

thanks,
Tom

Hi all !!!

i have just updated and 2.9.2-1 elog instance, and i have problems with the kerberos configuration.

I was surprised to see on the logs, that the 3.0 daemon was refusing to start because the system

config has kerberos listed as an authentication method. I saw on the logs that the current daemon

didnt have kerberos support compiled in.

Ive seen that there is ldap support, but couldnt find anything about configuring this auth sytem, does

amnyone have any example i could check ?

Did i have to use a patched version ? or compile it on my own ?

Regards

Stefan,

Just wanted to say, great job on this logbook.  I've been with you from the 
beginnning, and I must say it's evolved into an awesome tool.  Our IT dept 
lives by this logbook for change control mgmt, as well as a great way to 
keep everyone informed.   Not to mention what a great audit / reference 
tool it has become.   

Eric

I have created a javascript to be used as a browser link that allows a one
step cut and paste from a web browser into a elog logbook. 

The intended application is allow a user to do a text selection in a web
browser, then click on a bookmark that automagically pastes the selected
text, the current browser page url, and the current browser page title into
a pre-defined elog logbook.   I do some research where I would like to save
some text from a webpage, but also have a record of where the webpage came
from.  However, you should find that you can extend this script in a varity
of ways for your own application.  

The script is a simple one: it uses javascript in a saved bookmark to get
your selected text, title, and url, and then creates a new browser window
with a elog form, and print the document variables into the form, and then
submits the form to elog.   The key advantage to this approach is that you
can use the "post" command, rather than "get", to submit to the text section
of an elog logbook.  The only way I found now to submit to elog via a
bookmark is using the "get" command, and it doesn't allow entry of the
"text" field, only attribute fields.    

The second major advantage to using POST is that you can submit a much large
quanity of information ; However, some checking on this leads me to believe
that the limit is browser and server depended, so YMMV.  However, a great
discussion on the limits of browsers can be found here: 
http://www.squarefree.com/bookmarklets/browsers.html .

One of the major limits is that IE6.0 browsers have a maxium of 508 bytes
per bookmark - This book runs over 800 bytes, so I suspect tha IE6+ will not
allow it.  I tested the link with Mozilla and Firebird 0.7.

This script will need to edited for you to use with your elog logbook.
The script should be fairly self-explainitory, if you are used to html forms
and have some exposure to javascript.

You will need to modifiy the following fields:

1) in form action = http://<your_domain.com>/elog/<logbook>/?cmd=New
      change the link to point to your specific logbook to be used for entry.

2) the attribute fields need match up with the ones in your logbook.

     The ones listed in the template are Author, Email, Title, and URL.

     If you have fixed fields (like Author and Email), then you can
predefine these fields as shown.  

      I have the page title used as the entry for Title, and the page url is
 use as the URL attribute.

      Finally, I have the text selection used as the entry for the Text field.

      You can add additional fields by creating a new <input ...>  segment
in the script.  For those more clever than me, you can concatinate the
title, url and selection to paste into the Text area as well.  

3) once you have a edited version of the script (make sure you keep it as a
single line), you can then create a new bookmark in your browser, and then
paste the script into the properties->location field (for Mozilla/Firebird)
or the properites->url field (IE).  Give it a good name like "post to elog"

4) once saved, you can then go a web page, select some text, and then go to
your bookmarks and click on the bookmark.  It should then create a new
window in elog with a completed logbook entry.


some notes:

1) again, this may not work on IE6+ browsers due to M$ limitations.

2) You may have to be logged in already to elog for this work - I have not
tested the interaction using a password protected elog

3) You can only post to a single elog logbook - You'll need to have multiple
bookmarks for multiple logbooks.
   

We have elog-2.7.5-1.i386 on SL 5

If I create an elog entry using the web interface, and include an inline image,  email is sent with a zero-length named attachment - the MIME header is present, but no content.

In the config file, Email Format = 47, though I also tried with format = 63.

Is this a bug that was fixed in a later version, or a configuration error (or a new bug) ?

Hello all,

I am in need of isolating GET-requests referring to long-running, read-only elog functions such as search/filter/sort in our Apache proxy and redirecting them elsewhere. There does not, however, appear to be any easy way of reliably isolating these functions (with the exception of sort) by only looking at the URL.

Does anybody have any suggestions?

Regards,

Philip

Does anyone know whether ELOG has limit number of entries or it can create new entries as many as it can go?  Thanks.

Hi,

I am trying to implement a Custom input forms by following this  https://elog.psi.ch/elogs/Contributions/49. Is there a way to also insert an image or files to it? I want to take a snap from the iPad and want that to go as an attachment or attach a file(s) into the form. Is there a way to do that?

Your suggestions are highly appreciated.

Regards,

sjena