| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
68129
|
Mon Sep 28 06:29:57 2015 |
 | Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | All | 3.1.1 | Re: Creating ELog Links not working properly in HTML Editor | I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
68132
|
Mon Sep 28 12:05:04 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | All | 3.1.1 | Re: Creating ELog Links not working properly in HTML Editor | Right, spaces won't work. But others work. Andreas, if you just put elog:1 without any link etc. just as plain text, it will be converted automatically into a link.
A workaround is to explicitly specify a link to an elog entry. Press the link button from the editor toolbar, enter a name and copy the full URL from the browser address bar, like here: https://midas.psi.ch/elogs/Forum/68129. If you switch to "Source" (Top left editor toolbar, you can changed the link name manually, like here.
| Andreas Luedeke wrote: |
|
I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
|
68133
|
Tue Sep 29 08:50:30 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | All | 3.1.1 | Re: Creating ELog Links not working properly in HTML Editor | Hi Stefan,
yes, I know that a plain text " elog:1" works in the HTML editor, too. But if you put " elog:1" in the URL field of the link dialog, then ELOG screws up: you get the text and the link points to link type "URL", protocol "<other>", URL "1".
Or more precisely, the HTML source looks like the following:
<a href="1">elog.1</a>"><a href="1">elog.1</a>
(I've replaced ":" by "." here in the source, to avoid another iteration of links by ELOG).
That is not what I would have expected:
either it should have been remained unchanged, or it should point to the right URL of the entry elog:1 (the latter case preferred :-).
Cheers, Andreas
| Stefan Ritt wrote: |
|
Right, spaces won't work. But others work. Andreas, if you just put elog:1 without any link etc. just as plain text, it will be converted automatically into a link.
A workaround is to explicitly specify a link to an elog entry. Press the link button from the editor toolbar, enter a name and copy the full URL from the browser address bar, like here: https://midas.psi.ch/elogs/Forum/68129. If you switch to "Source" (Top left editor toolbar, you can changed the link name manually, like here.
| Andreas Luedeke wrote: |
|
I can confirm this bug.
But I don't think this has to work as you've described it, when using the HTML editor: if you use HTML, you can use the link feature of the editor.
But that link feature does currently not work at all with internal elog references, not even a simple elog:1"> elog:1 (as you can see here). I suppose there is some more work to do for Stefan on that ;-)
Cheers, Andreas
| Edmund Hertle wrote: |
|
Hey,
the syntax for creating links to other elog entries has a small issue in the HTML editor. The link will not be created properly if there are whitespaces in the name of the logbook. Using ELCode (or in a simple attribute field) the whitespaces can be replaced by "+", but this does not work in the HTML editor. The work-around would be to use ELCode mark-up instead of HTML.
Example 1 (this should work): elog:Contributions/47
Example 2 (this will not work): elog:Config+Examples/11
Example 3 (will also not work): elog:Config%20Examples/11
|
|
|
|
|
68173
|
Fri Oct 30 18:20:22 2015 |
 | Kester Habermann | kester.habermann@gmail.com | Bug report | All | 3.1.1 | restrict edit time and autosave | Hello,
When using restrict edit time together with autosave, there is the following problem: The counter for restrict edit time seems to start after the autosave. If the time is up, it is no longer possible to submit the report.
It is also not possble to edit old drafts if restrict edit has elapsed since the creation of the save.
Autosave is definitively a nice new feature. However, I think it would be better if the counter for restrict edit time only started after the "submit" of the report and allowed edits to drafts no matter how old they are. As it is one needs to either set a really high value for restrict edit time or turn off autosave.
The issue seems to be related to: https://midas.psi.ch/elogs/Forum/68103
Regards
Kester
|
|
68176
|
Mon Nov 2 08:41:20 2015 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Bug report | All | 3.1.1 | Re: restrict edit time and autosave | Hi Kester,
yes, I did run into the same problem, that I could not even delete old drafts due to our restrict edit time.
We allow anonymous submissions in our operation logbooks. After a while drafts of unsubmitted messages just pile up; and I need to remove them as administrator.
While I can do that easily for anonymous drafts, I cannot do that for drafts of other users: I don't easily see those drafts.
It would be really nice, if drafts would be handled different then other entries regarding "Restrict edit time" as you've suggested.
Cheers, Andreas
| Kester Habermann wrote: |
|
Hello,
When using restrict edit time together with autosave, there is the following problem: The counter for restrict edit time seems to start after the autosave. If the time is up, it is no longer possible to submit the report.
It is also not possble to edit old drafts if restrict edit has elapsed since the creation of the save.
Autosave is definitively a nice new feature. However, I think it would be better if the counter for restrict edit time only started after the "submit" of the report and allowed edits to drafts no matter how old they are. As it is one needs to either set a really high value for restrict edit time or turn off autosave.
The issue seems to be related to: https://midas.psi.ch/elogs/Forum/68103
Regards
Kester
|
|
|
68179
|
Thu Nov 5 16:59:34 2015 |
| Simon Däster | daesters@phys.ethz.ch | Bug report | Linux | V3.1.1-b4d | Paste figure from Clipboard, CKEditor 4.5.1 and Firefox 42 | I tried to paste an Image from Clipboard into the CKEditor 4.5.1. Unfortunatelly, that doesn't work. I used Firefox, version 42. When I looked in the javascript error console, it reported that "TypeError: b is undefined, ckeditor.js:1139:112". The variable d.config.filebrowserImageUploadUrl could not be found.
I set the variable in the file ckeditor-config.js in the folder scripts, but that didn't solve the problem. As far as I can tell, Pasting Image from Clipboard does not work in this forum neither, but I don't know whether this is in purpose.
Pasting via the button "Paste from Word" works as it inserts a 64base formated image, but that's not what I'm searching for. Also normal upload of files works fine and puts the file in the correct folder (logbook/year/)
|
|
68185
|
Tue Nov 10 14:08:47 2015 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Linux | V3.1.1-b4d | Re: Paste figure from Clipboard, CKEditor 4.5.1 and Firefox 42 | That seems a CKEditor problem. Can you see if it works on their site (ckeditor.com). The current version is 4.5.4. Maybe they fixed it. You can upgrade CKEditor yourself in elog by just copying the new verson over the old /elog/scripts/ckeditor directory.
| Simon Däster wrote: |
|
I tried to paste an Image from Clipboard into the CKEditor 4.5.1. Unfortunatelly, that doesn't work. I used Firefox, version 42. When I looked in the javascript error console, it reported that "TypeError: b is undefined, ckeditor.js:1139:112". The variable d.config.filebrowserImageUploadUrl could not be found.
I set the variable in the file ckeditor-config.js in the folder scripts, but that didn't solve the problem. As far as I can tell, Pasting Image from Clipboard does not work in this forum neither, but I don't know whether this is in purpose.
Pasting via the button "Paste from Word" works as it inserts a 64base formated image, but that's not what I'm searching for. Also normal upload of files works fine and puts the file in the correct folder (logbook/year/)
|
|
|
68200
|
Mon Nov 23 10:32:37 2015 |
| Simon Däster | daesters@phys.ethz.ch | Bug report | Linux | V3.1.1-b4d | Re: Paste figure from Clipboard, CKEditor 4.5.1 and Firefox 42 | Updating CKeditor did work, thanks for the tip. |
|