Hello,

is it possible to have an guest account together with a global password file?

I tried to put the password file statement into the global section of
elogd.cfg. But in this case every user must login and it is not possible to
have a read only guest account. 
But if I put the password file statemnet into the logbook sections, it is
possible to access the logbooks in read-only mode without logging in. The
drawback of this solution is, that you have to login into every logbook
seperately.

Bertram

Hi

  I just updated my mirror server, which I just use as a backup to my main server, to 2.9.0 and found that after logging in (the selection page is not protected, but the individual logbooks are) and coming back to the selection page I no longer get the "Synchronize all logbooks" even though I am an admin user. The relevant code is in elogd.c in the show_selection_page() routine:

       /* only admin user sees synchronization link */
        if (is_admin_user("global", getparam("unm"))) {
         rsprintf("<tr>\n");
         rsprintf("<td colspan=13 class=\"seltitle\">\n");
         rsprintf("<a href=\"?cmd=Synchronize\">%s</a></td>\n", loc("Synchronize all logbooks"));
         rsprintf("</tr>\n");
      }
 

what is happening is that after logging in to a logbook and coming back to the selection page, the "unm" parameter is not set, so getparam("unm") returns NULL, who clearly is not in the admin user list.  The strange thing is that in an individual logbook the unm (and uname) parameters are working fine, and I have admin rights - can change the global config file, do an individual synchronization, etc.  It is just from the selection page that the unm parameter is not working.

In fact, I commented out the if statement above, just to see if I could get synchronized using the link, and that failed too, with a message "No user name supplied for remote access" even though I do have a "mirror user" statement in my config.  Again, if I do each one individually it all works.  In addition, the cron synchronization (i.e. mirror cron) also works fine.

Obviously this isn't crucial, just a pain that can be worked around, but if anyone has any ideas I'd be glad to hear them.

Steve

PS Another feature request: when you forget to set an icon in this forum and then use the "back button" it shouldn't force you to rewrite the whole message over again!

In der Config-Datei habe ich den Eintrag "language = german" vorgenommen. Was unter Windows funktioniert, verweigert mir Linux: Die Umstellung des Logs auf Deutsch. Wer kann helfen?

Salvatore

Hi Stefan and Andreas,

With the latest incremental version of elog (a738232), I have noticed that when attaching a pdf file, the
.png thumbnail is not generated when the "upload" button is pressed - there is just the usual small line saying
what the latest attachment is.  If this happens, a subsequent attachment will force the generation of the
thumbnail for the *previous* attachment, and again no thumbnail for the latest attachment.

Submitting the comment will also generate the thumbnail.

As of yet, I cannot find any consistent pattern to this.  Also, it's hardly a disaster, but I have been fooled
when attaching a pdf file that subsequently turned out to be damaged and thus unreadable.

How can i configure eLog to be used completely anonymous without the need to log in?

I tried menu and guest menu settings without luck. I do not use password files. With earlier versions this was easy to set up...

Thanks in advance

I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"