| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
69570
|
Wed Oct 19 14:08:15 2022 |
 | Stefan Ritt | UNstefan.ritt@psi.ch | Question | Windows | 3.1.4 | Re: UNC Pfade | UNCs are not officially supported by elog, but your operating system might map them if you're lucky, just try. It is however not recommended to do so, since network drives can sometimes be slow during network congestion and the response of elog will then suffer.
Stefan
| Michael wrote: |
|
Hallo,
gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?
\\server\freigabe\...
Der Freigabepfad wird leider immer unter C:\... angelegt
Vielen Dank
|
|
|
69742
|
Fri Feb 23 15:13:46 2024 |
| Stefan Ritt | Thstefan.ritt@psi.ch | Bug report | Linux | 3.1.5-1 | Re: user change under webserver authentication not recognized | Thanks for the fix, I committed it. Please give it a quicky try sinc I cannot test it here (don't use webserver authentication...)
Stefan
| Frank Heyroth wrote: |
|
I found the reason of the bug:
In line 27441 of elogd.cxx the http_user is overwritten by the user saved in the sid_ array as a sideeffect of the sid_check function:
sid_check(getparam("sid"), http_user)
It can solved by changing elogd.cxx @ line 27441
27441c27441,27446
< if (!sid_check(getparam("sid"), http_user)) { /* if we don't have a sid yet, set it */
---
> i=sid_check(getparam("sid"), thumb_name);
> if (i && strcmp(http_user,thumb_name)!=0) { /* user changed */
> sid_remove(getparam("sid"));
> i=FALSE;
> }
> if (!i) { /* if we don't have a sid yet, set it */
Remark: I have used the variables i & thumb_name of the function in a local context.
|
|
|
69650
|
Wed Feb 8 10:05:03 2023 |
| Cryptage | Thgacryptage@hotmail.fr | Bug report | Linux | 3.1.5 | Re: 3.1.5 - Mass edit bug + Wrong version | Thanks !
Sometime I need to edit multiple values to add a new choice.
By exemple, if I add a new column "status" (open, closed...) , it's mandatory to use select menu to add the new value to existent entries.
With a lot of lines it's not possible to edit one by one.
| Stefan Ritt wrote: |
|
If it works with a simple edit, then why don't you use that one to edit individual values. I checked and version 3.1.4 had already the same problem, so it was not newly introduced. I would have to invest a couple of hours to fix this issue correcly, which I simply don't have right now.
|
|
|
69681
|
Mon Aug 14 08:35:58 2023 |
| Stefan Ritt | Therestefan.ritt@psi.ch | Question | Linux | 3.1.5-1 | Re: line breaks in 'Subject' | There are two locations where 'Subject' is shown, the list display and the individual message display. I guess you mean the first one.
In that case, you can modify the CSS styel sheet 'elog.css' and add following statement to the classes list2 and list2h:
.list2 {
...
white-space: nowrap;
}
.list2h {
...
white-space: nowrap;
}
| Evinrude Motor wrote: |
|
Certain characters contained in the 'Subject' will cause the text to split into multiple lines .
For example if I enter "My Subject" in the 'Subject' field it is displayed as
My
Subject
If I enter "My_Subject" it is displayed as
My_Subject
Is there any way to change this so no line breaks are created ?
|
|
|
69770
|
Mon Mar 25 16:19:02 2024 |
| scott | Thank shiva.ps@stfc.ac.uk | Question | Linux | 3.1.5-1 | Re: Installation with amp on Rocky Linux | Hi,
Thanks for the links to EL8/EL9.
Does this package support LDAP and SSL as well?
| Laurent Jean-Rigaud wrote: |
|
Hi,
The ELOG website provides new link to RPM packages :
Linux binaries are distributed as RPMs.
EL8/EL9 RPM are also available.
| scott wrote: |
|
Is there an RPM available for Rocky 8 or Rocky 9?
And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM?
Thanks,
Scott
| Laurent Jean-Rigaud wrote: |
|
Normally it should work. Requirements are set in SPEC file.
$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh
/bin/sh
/bin/sh
config(elog) = 3.1.5-20240226.el7
krb5-libs
libc.so.6()(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.15)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libc.so.6(GLIBC_2.4)(64bit)
libc.so.6(GLIBC_2.8)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libkrb5.so.3()(64bit)
libkrb5.so.3(krb5_3_MIT)(64bit)
liblber-2.4.so.2()(64bit)
libldap-2.4.so.2()(64bit)
libm.so.6()(64bit)
libpam.so.0()(64bit)
libpam.so.0(LIBPAM_1.0)(64bit)
libssl.so.10()(64bit)
libssl.so.10(libssl.so.10)(64bit)
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(GLIBCXX_3.4)(64bit)
openldap >= 2.4.1
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rtld(GNU_HASH)
rpmlib(PayloadIsXz) <= 5.2-1
The EL7 binary needs the following RPM :
$ ldd /usr/local/sbin/elogd | awk '{print $1}' | while read r ; do rpm -qf /lib64/$r ; done | sort -u
erreur�: fichier /lib64/linux-vdso.so.1�: Aucun fichier ou dossier de ce type
erreur�: fichier /lib64/lib64/ld-linux-x86-64.so.2�: Aucun fichier ou dossier de ce type
audit-libs-2.8.5-4.el7.x86_64
cyrus-sasl-lib-2.1.26-24.el7_9.x86_64
glibc-2.17-326.el7_9.x86_64
keyutils-libs-1.5.8-3.el7.x86_64
krb5-libs-1.15.1-55.el7_9.x86_64
libcap-ng-0.7.5-4.el7.x86_64
libcom_err-1.42.9-19.el7.x86_64
libgcc-4.8.5-44.el7.x86_64
libselinux-2.5-15.el7.x86_64
libstdc++-4.8.5-44.el7.x86_64
nspr-4.35.0-1.el7_9.x86_64
nss-3.90.0-2.el7_9.x86_64
nss-softokn-freebl-3.90.0-6.el7_9.x86_64
nss-util-3.90.0-1.el7_9.x86_64
openldap-2.4.44-25.el7_9.x86_64
openssl-libs-1.0.2k-26.el7_9.x86_64
pam-1.1.8-23.el7.x86_64
pcre-8.32-17.el7.x86_64
zlib-1.2.7-21.el7_9.x86_64
Almost all of them are installed by ELOG RPM or are already installed by default Redhat profiles.
Nina, do you use right RPM version (el7/8/9) according to Rockylinux one ? El7 rpm can not be installed on RL9...
Bye
| Stefan Ritt wrote: |
|
Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically installed:
Dependencies Resolved
====================================================================================================================================
Package Arch Version Repository Size
====================================================================================================================================
Updating:
emacs x86_64 1:24.3-23.el7_9.1 rhel7 2.9 M
Updating for dependencies:
emacs-common x86_64 1:24.3-23.el7_9.1 rhel7 20 M
Transaction Summary
====================================================================================================================================
Upgrade 1 Package (+1 Dependent package)
Total download size: 23 M
Is this ok [y/d/N]:
| Laurent Jean-Rigaud wrote: |
|
Hi Nina,
The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does not take care of dependencies.
Try to install with yum : yum install elog-latest.el7.x86_64.rpm
Normally the missing rpm files should be dlded from RL repo if your host can access to them...
.
Laurent
| Nina Bondarenko wrote: |
|
Hello all,
I am installing elog on an Rocky Linux instance. Have dependensy problem.
rpm -Uvh elog-latest.el7.x86_64.rpm
error: Failed dependencies:
liblber-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64
libldap-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64
libssl.so.10()(64bit) is needed by elog-3.1.5-1.el7.x86_64
libssl.so.10(libssl.so.10)(64bit) is needed by elog-3.1.5-1.el7.x86_64
Any clues from developers to resolve it and keep the software working. Thank you in advance!
Bests, Nina
|
|
|
|
|
|
|
|
69834
|
Wed Sep 25 13:26:07 2024 |
| Patrick Upson | Tahpatrick.upson@dfo-mpo.gc.ca | Question | Windows | 2.9.2 | Re: Looking for version update advice | Thanks. I did eveuntaully find the change log and made the decision to upgrade the at-sea machines. So far the configuration file we update for each mission still works. I have a copy of the 2.9.2 installer that if something catostrophic happens I can remove the new version and take it back, but I don't think it'll be a problem. We archive logbooks at the end of a mission, but each mission basically starts from a fresh install like state anyway.
| Stefan Ritt wrote: |
|
If 3.1.4 runs safely on your laptop, there should be no problem to update the 2.9.2 one. But first do it on a copy of your logbooks from the at-sea. The get converted automatically into a newer format but that should be transparent.
On the other hand you don't really need a new system if your old installation works fine and you don't need any of hte new features.
The changelog ist here: https://elog.psi.ch/elog/download/ChangeLog
Stefan
| Patrick Upson wrote: |
|
I've inherited a position that includes deploying elog for an at-sea mission. Once at sea there's no gauntee of internet connection so I have to be sure things are going to work before hand. The machines I currently have (we have several backup machines) are running elog version 2.9.2 and I'm looking for a change log, or feature list to determine if it's safe to update the at-sea laptops to the latest version of elog.
On one hand, I could leave things as they are and I'm sure it will just work, on the other hand, I hate seeing things get out of date to the point that something just stops working some day and there's no ability to get support for old software.
I'm already running elog 3.1.4 on my personal machine I use for configuration development and testing and it seems to work well. The config file is pretty simple and seems to work with 2.9.2 on the at-sea machines, but I don't want to run into any suprises if there ends up being a compatibility issue at sea.
|
|
|
|
67055
|
Sat Apr 23 14:32:38 2011 |
| Pelle | Sorry, found it | Info | Linux | 2,3.8 | Re: elog2sql - a script to convert elog logbooks to a MySQL database | > > I know this thread was started 2003 but if anyone have this MySQL export script please attach it to this thread. > > Thanks, > > Pelle
Sorry, found it in the contribution list https://midas.psi.ch/elogs/Contributions/5 |
|
69561
|
Mon Sep 26 12:38:29 2022 |
| Stefan Ritt | Permistefan.ritt@psi.ch | Question | Linux | 3.1.4-395 | Re: Need help with permission | Permissions are handled by the operating system and have nothing to do with elog. Make sure you run elog under an account which has write access to the desired directories. Consult Ubuntu documentation how to do that. Sometimes it's helpful to start elog interactively with the -v flag to see some verbose output. Maybe you can spot something there.
Stefan
| Mikkel D. Lund wrote: |
|
Hi all,
I have the same problem on Ubuntu 22.04. I have compiled from the latest tarball and copied all our logbooks from our old Ubuntu 18.04 server to a new Ubuntu 22.04. The logbooks does however not appear when I log in, so I assume ELOG doesn't have read access either?
Any hints on how to set the permissions correctly would be greatly appreciated.
Thanks,
Mikkel
| Dan Witteman wrote: |
|
Hello,
I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries.
When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or edit anything.
Attempting to post throws the error:
New entry cannot be written to directory "/usr/local/elog/logbooks/demo/"
Please check that it exists and elogd has write access and disk is not full.
Please point me in the right direction to correctly set permissions and create aditional log books.
Thanks,
Dan
|
|
|
|