Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 799 of 801  Not logged in ELOG logo
ID Datedown Icon Author Author Email Category OS ELOG Version Subject
  61   Tue Jul 9 09:25:41 2002 Reply Stefan Rittstefan.ritt@psi.chInfo  Re: problem saving elogd.cfg
> In version 2.0.4 of eLog I was having some problems with saving my 
> configuration file once I edited it on the web using the config. command.
> I keep getting the message "Cannot open file %s: elogd.cfg".  I made sure 
> the file was in the right directory.  I dont know if I am doing something 
> wrong or if its a bug?

The error display is certainly wrong. I fixed that and you can download the 
updated version at 

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

As for the error, you should check the file permissions. If you run the 
daemon under a user which has no write access to the directory or file, you 
would get the described error.
  60   Tue Jul 9 09:18:05 2002 Reply Stefan Rittstefan.ritt@psi.chInfo  Re: Where can I get more information on the config file
> Where can I get more information about the config and themes file. I
> downloaded the latest version (2.0.4) and the config file docs seem out of
> date. I would like to get the icons working as well as getting the email 
to
> work. The demo page at the elog home site shows both but I cannot find ant
> references to the icons.

Oops, I forgot the "IOptions" statement to documentation. Please see the 
updated version at

http://midas.psi.ch/elog/config.html

look for "IOptions". For the Email notification see the whole 
section "Email 
notification" near the bottom of the page.
  59   Mon Jul 8 22:50:16 2002 Question Scott Fenstermacherdsfens@wm.eduQuestion  Where can I get more information on the config file
Where can I get more information about the config and themes file. I
downloaded the latest version (2.0.4) and the config file docs seem out of
date. I would like to get the icons working as well as getting the email to
work. The demo page at the elog home site shows both but I cannot find ant
references to the icons.
  58   Mon Jul 8 21:01:00 2002 Question Christian KorschanChristian.Korschan@CTBTO.ORGBug report  Compiling elog 2.0.4 on Solaris
Comiling elogd 2.0.4 under Solaris obviously fails with

gcc  -o elog elog.c -lsocket -lnsl
gcc  -o elogd elogd.c -lsocket -lnsl
elogd.c: In function `ss_file_find':
elogd.c:1372: `alphasort' undeclared (first use in this function)
elogd.c:1372: (Each undeclared identifier is reported only once
elogd.c:1372: for each function it appears in.)
make: *** [elogd] Error 1

because alphasort is an ucb'ism which does not exist under SYSV

... not very portable :-(
  57   Mon Jul 8 19:42:13 2002 Warning H. Scheith.scheit@mpi-hd.mpg.deBug report  elog submit without user and password
With elog it is possible to submit messages to a password protected
logbook without specifying the -u option.  I.e. NO PASSWORD is
necessary to submit a message.  I assume it is related to the problem
of expiring password-cookies while entering the message using a web
browser.
  56   Mon Jul 8 17:18:05 2002 Question Momsheikh25@hotmail.comBug report  problem saving elogd.cfg
In version 2.0.4 of eLog I was having some problems with saving my 
configuration file once I edited it on the web using the config. command.
I keep getting the message "Cannot open file %s: elogd.cfg".  I made sure 
the file was in the right directory.  I dont know if I am doing something 
wrong or if its a bug?

Mo.
  55   Mon Jul 8 10:45:37 2002 Reply Stefan Rittstefan.ritt@psi.chBug fix  Re: reverse sort and threaded mode does not display first entry
> When the option 'Reverse sort = 1' is used then the first entry
> is not displayed (ID=1) when threaded mode is requested.
> 
> Probably you can see the problem using this link and switching 
> on reverse sort.  
> 
> http://midas.psi.ch/elogdemo/Linux/last20?mode=threaded

Has been fixed in 2.0.4, have a look at

http://midas.psi.ch/elogdemo/Linux/last20?mode=threaded&reverse=1
  54   Mon Jul 8 10:44:08 2002 Reply Stefan Rittstefan.ritt@psi.chBug fix  Re: elog submit problem
> If a message is submitted via the elog command then the reply string '> ' 
is only inserted in the first line if a reply is made.
> This message was submitted with the following commandline:
> elog -v -h midas.psi.ch -p 80 -s elogdemo -l Forum -a "Icon=icon4.gif" -
a "Author=Heiko Scheit"  -a "Author Email=h.scheit@mpi-hd.mpg.de" -
a "Subject=elog submit problem" "...Message-text..."
> Please press the reply button to see the problem.

Has been fixed in 2.0.4 (as you can see from this entry). Please make sure 
not to submit too long lines via "elog". For browser submissions, the line 
length is limited to 78 characters, but not for "elog" submissions.
ELOG V3.1.5-3fb85fa6