Hello,

I have a question concerning the following situation:

There is a one logbook with two possible acces methods (defined in config 
file) one for readonly access and one for read/write access. Both entries in 
the elogd.cfg file pointing to the same logbook.

When an allowed person enters a logbook entry with an email notification the 
link to the message is given inside the email. 
This link points to the read/write logbook entry.

Is it possible to alter the link in the email notification that it points to 
the corresponding readlonly logbook entry? 

Thank you for hints, best regards,


Stefan Siegel  

> Hello,
>     Is it possible to have a drop down list with commas in the options.  
> For instance, if you want to have a attribute "CityState" you would 
> probably want a comma between the City and State name.  Since the Options 
> are separated by commas, it turns into two different options.  I dont know 
> if there is a way to do this or if this is a bug?

From the next version on *2.0.4), one can specify attributes in quotation 
marks like

Options town = San Francisco, "Paris, Texas", "Paris, France"

which then can include commas.

Hello,
    Is it possible to have a drop down list with commas in the options.  
For instance, if you want to have a attribute "CityState" you would 
probably want a comma between the City and State name.  Since the Options 
are separated by commas, it turns into two different options.  I dont know 
if there is a way to do this or if this is a bug?

MO

> Try to submit the following message:
> 
> *** cut here ***
> -------------------------------------------------
> -------------------------------------------------
> -------------------------------------------------
> -------------------------------------------------
> *** cut here ***
> 
> In fact after the next line there were 4 lines with '-', but
> they were not accepted by elog:

Ok, also fixed. Updated version is at 

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

Here is actually an example with '----' at the end:

-------------------------------------------------
-------------------------------------------------
-------------------------------------------------
-------------------------------------------------

> I want to set up eLogs for a class w/out the need for passwords. But, at the
> same time, I don't want the students to change the config file. I tried
> setting up a global password, but am having some difficulty with the syntax
> I suppose I could remove the config command from the menu and edit the file
> using Pico, but that would require a better memory than I have...
> 
> ******************
> 
> usage: elogd [-p port] [-h hostname] [-D] [-c file] [-r pwd] [-w pwd] [-a
> pwd] [-l logbook]
> 
>        -p <port> TCP/IP port
>        -h <hostname> TCP/IP hostname
>        -D become a daemon
>        -c <file> specify configuration file
>        -v debugging output
>        -r create/overwrite read password in config file
>        -w create/overwrite write password in config file
>        -a create/overwrite admin password in config file
>        -l <logbook> specify logbook for -r and -w commands
> 
>        -k do not use keep-alive
> 
> [root@eMonster elog]# elogd -a youtheman
>           
> Must specify a lookbook via the -l parameter.

Nearly correct, just follow the note: specify a logbook via the -l parameter.
So if you logbook is called "linux", you enter

elogd -a youtheman -l linux

> The mode (i.e. summary, threaded, full) should be kept for the
> last??? and past??? links on a page.
> 
> For instance:
> 
> http://midas.psi.ch/elogdemo/Linux/last10?mode=threaded
> 
> The last20 link on this page should also be in threaded mode.

Has been fixed. Will be included in next version.

> Try this URL
> 
> http://midas.psi.ch/elogdemo/Forum/?cmd=Search

Ok, has been fixed. Will be included in the next version.

For some reason it looses the "m" so line 5 instead of having
"hh:mm" has "hh: m"


Please ideas ;)
Cheers,
GL.