Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Sorry about the multiple entries!!! -> browser problems

Hi All,

Perhaps a trivial question but some issues have arisen accessing my long-running elog with SSL enabled.  I suspect firewalls and browser updates are involved and I do not have the time or experience to diagnose and debug such a potential black-hole of difficulties.  Instead I am looking for a quick fix, and the first step - switching off sll - seems to work.  Now I would like to use redirect so that the elog is running under apache, however this is where I have stumbled; I have passwords so the plan is to eventually secure using apache.  Apache works fine and is running pages on ports 80 and 443, although I seem unable to redirect the elog (port 8080).  Following the instructions on the administrators guide I get:

Forbidden

You don't have permission to access /elog/ on this server.

The page is found at least so my redirect is doing something, and I suspect the solution is trivial, though I'm not too sure where to start.

-------------------

Also, what is  the best practice for updating one's elog version.  I originally installed using a tarball.

 Still struggling with this issue, if anyone has managed to solve it let me know.   I've done the obvious and checked ownership/ permissions of the elog folders and they are exactly the same as etc/var/www, which is working in apache.

Segfault when password file is empty and not writable a segmentation fault is generated when a new user tries to register:

root#  > passwd


root#  chown root.root passwd


root#  chmod 644 passwd


root#  grep -i usr elogd.cfg


root#


kernel: [515323.672377] elogd[31048]: segfault at 78 ip 00000000004ba780 sp 00007fff03cd2078 error 4 in elogd[400000+dc000]
 

I cannot reproduce this error when running within gdb.