The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load" and "unload" subcommands of the "launchctl" command have been deprecated for some time.  After trying my luck again on a new Mac with the latest operating system, I encountered errors of the type "Load failed: 5: Input/output error" when attempting to follow these instructions.

After a bit of searching around, I used information at the page https://www.alansiu.net/2023/11/15/launchctl-new-subcommand-basics-for-macos/ to deploy the more current subcommands as follows:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl disable system/ch.psi.elogd

Once the above can be verified, perhaps the instructions in the Administrator's Guide can be updated accordingly.

Hey,

if you define a Tooltip at the moment it is only displayed on the attribute. I would like it very much if it would also be displayed on the values (on the right column in the detailed view and on the whole column in the list view), since we are using the tooltips to define the units of the attribute and it would be nice to pop up when you hover a value.

As for the comment it would be nice to have a flag to also show the comment on the detailed view while looking at an entry. At the moment it is only showed when creating a new entry. Again we use this field to define the units.

This is an example of how we use these options:

attributes = Fill Number, Beam Current, Beam Energy, Beam Lifetime, RF Voltage S2, RF Voltage S4, RF Frequency, Synchrotron Frequency

Comment Beam Current = in mA
Comment Beam Energy = in GeV
Comment Beam Lifetime = in hh:mm
Comment RF Voltage S2 = in kV
Comment RF Voltage S4 = in kV
Comment RF Frequency = in MHz
Comment Synchrotron Frequency = in kHz

Tooltip Beam Current = in mA
Tooltip Beam Energy = in GeV
Tooltip Beam Lifetime = in hh:mm
Tooltip RF Voltage S2 = in kV
Tooltip RF Voltage S4 = in kV
Tooltip RF Frequency = in MHz
Tooltip Synchrotron Frequency = in kHz

Cheers

eddy

Hey,

if you define a Tooltip at the moment it is only displayed on the attribute. I would like it very much if it would also be displayed on the values (on the right column in the detailed view and on the whole column in the list view), since we are using the tooltips to define the units of the attribute and it would be nice to pop up when you hover a value.

As for the comment it would be nice to have a flag to also show the comment on the detailed view while looking at an entry. At the moment it is only showed when creating a new entry. Again we use this field to define the units.

This is an example of how we use these options:

attributes = Fill Number, Beam Current, Beam Energy, Beam Lifetime, RF Voltage S2, RF Voltage S4, RF Frequency, Synchrotron Frequency

Comment Beam Current = in mA
Comment Beam Energy = in GeV
Comment Beam Lifetime = in hh:mm
Comment RF Voltage S2 = in kV
Comment RF Voltage S4 = in kV
Comment RF Frequency = in MHz
Comment Synchrotron Frequency = in kHz

Tooltip Beam Current = in mA
Tooltip Beam Energy = in GeV
Tooltip Beam Lifetime = in hh:mm
Tooltip RF Voltage S2 = in kV
Tooltip RF Voltage S4 = in kV
Tooltip RF Frequency = in MHz
Tooltip Synchrotron Frequency = in kHz

Cheers

eddy

• Headings
  It would be great to have a range of
  ,
  , ... tags that map directly to their HTML counterparts (and have buttons, of course... ). That makes structuring an entry much easier in my opinion (and the output is easier to deal with for tools like html2ps) and I'm really missing those.
  
• Tables
  This one is probably more difficult to add, but support for simple tables would be enough. But this is more a "nice to have"...
  

Hi

I am trying to use this line from the documentation:

Execute new = echo "New message wiht ID $message id of type $type from $long_name on $remote_host" >> /tmp/elog.log

It does not seem to have the intended effect (of printing a line with the message id, etc in the file /tmp/elog.log
)

How can I make this line work ?

Soren

; preset author and email
Preset Author                 = $short_name
Preset Author Email           = $user_email
Subst on reply Author         = $short_name
Subst on reply Author Email   = $user_email
Subst on reply subject        = Re: $subject

; these attributes cannot be changed
Locked Attributes             = Author, Author Email
Fixed Attributes Reply        = Subject

Good day,

I'm new to Elog and I find it really nice and straight foward...

I still have a few questions that I couldn't address reading the manuals.

-I'm creating a logbook with a lot of attributes. I would like to know if there is a way to name (display) my attribute differently then it's original name. That way I could program $attrib1; $attrib2, etc, and map a name to display the column accordingly... Is it something possible ? 

-Is it possible to hide the field "Entry Time" when creating or editing an entry ?

-I saw the Cell Style fonction to set Color (really nice...), My attribute1 is a worker name; Attribute2 is how the work is going on (stop, ready, in process) I would like to hide Atribute2 in list mode but change Attribute1 cell color based on Attribute2 status... is it possible to do so?

-When using "Show Text = 0" (i'm only using attributes), creating a new entry present the menu "Submit", "Save", "Preview" and "Back".... Pressing "Save" leaves the page, shows "OK with a number" and "Preview" is useless. Is it possible to tune what button should be present or not ? I would like to remove Save and Preview....

For the info, my config file

[GCT]
Theme = default
Show Text = 0
Enable attachments = 0
Show attachments = 0
Use lock = 1
Bottom text = 
Comment = Gestion de la charge de travail
omit email to = 1
Suppress Email to users = 1
Suppress default = 2
Suppress Email on edit = 2
Resubmit default = 2
Enable browsing = 0
Back to main = 1
List after submit = 1
'Mode commands = 0
Menu commands = Select, edit, Delete
List menu commands = Select, New, Find
Attributes = #Réception, #Galée, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, Correction, Contrôle final
List display = Edit, #Réception, #Galée, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, Correction, Contrôle final
Fixed Attributes Edit = #Réception
Preset #Réception = #####

Format #Réception = 0,attribname,attribvalue,5,5
Format #Galée = 0,attribname,attribvalue,10,10
Format Infographiste = 0,attribname,attribvalue,2,2
Format Réviseur = 0,attribname,attribvalue,2,2
Format Contrôleur = 0,attribname,attribvalue,2,2
Format Correcteur = 0,attribname,attribvalue,2,2

Options Infographiste = ??, ML
Options Réviseur = ??
Options Contrôleur = ??
Options Correcteur = ??

Preset Infographiste = ??
Preset Réviseur = ??
Preset Contrôleur = ??
Preset Correcteur = ??

Extendable options = Infographiste, Réviseur, Contrôleur, Correcteur 

ROptions Traitement = ., En cours, Prêt, Vérification
ROptions Révision = ., En cours, Prêt
ROptions Contrôle = ., En cours, Prêt
ROptions Correction = ., En cours, Prêt
ROptions Contrôle final = ., OK

Cell Style Traitement En cours = background-color:#FF0000 
Cell Style Traitement Prêt = background-color:#33FF33
Cell Style Traitement Vérification = background-color:yellow

Cell Style Révision En cours = background-color:#FF0000 
Cell Style Révision Prêt = background-color:#33FF33
Cell Style Révision Vérification = background-color:yellow

Cell Style Contrôle En cours = background-color:#FF0000 
Cell Style Contrôle Prêt = background-color:#33FF33
Cell Style Contrôle Vérification = background-color:yellow

Cell Style Correction En cours = background-color:#FF0000 
Cell Style Correction Prêt = background-color:#33FF33
Cell Style Correction Vérification = background-color:yellow

Cell Style Contrôle final OK = background-color:#33FF33

Cell Style Contrôle final En cours = background-color:#FF0000 
Cell Style Contrôle final Prêt = background-color:#33FF33
Cell Style Contrôle final Vérification = background-color:yellow

Thanks alot for your help :)