\/* default formatting */
body {
  margin:3px;
  color:black;
  background-color:white;
  font-family:sans-serif;
}

/* standard link colors and decorations */
a:link { color:#0000FF; text-decoration:none }
a:visited { color:#0000FF; text-decoration:none }
a:hover { color:#0000FF; text-decoration:underline }
a:active { color:#0000FF; text-decoration:underline }
a:focus { color:#0000FF; text-decoration:underline }

td {
  color:black;
  font-family:sans-serif; 
}

/* frame table */
.frame {
  width:100%;
}

/* printable frame table */
.pframe {
  width:600;
}

/* standard formatting for logbook tabs */
.tabs {
  font-family:sans-serif;
  font-size:10pt;
  background-color:white;
}

/* logbook selection page */
.selframe {
  width:60%;
  background-color:#486090; 
  border:1px solid #486090;
  font-size:12pt;
}

.seltitle {
  border:1px solid #0000FF;
  border-top:1px solid white;
  border-left:1px solid white;
  background-color:#CCCCFF;
  color:#486090;
  text-align:center;
}

.selexp {
  border:1px solid #0000FF;
  border-top:1px solid white;
  border-left:1px solid white;
  background-color:#CCCCFF;
  color:#486090;
  text-align:left;
  font-size:10pt;
}

.selspace {
  width:2%;
  border:1px solid #308000;
  border-top:1px solid white;
  border-left:1px solid white;
  background-color:#EEEEEE;
}

.selgroup {
  border:1px solid #308000;
  border-top:1px solid white;
  border-left:1px solid white;
  background-color:#FFCCFF;
  padding:3px;
  text-align:left;
  font-weight:bold;
  font-size:14pt;
}

.sellogbook {
  border:1px solid #308000;
  border-top:1px solid white;
  border-left:1px solid white;
  background-color:#DDEEBB;
  padding:3px;
  text-align:left;
  font-weight:bold;
}

.selcomment {
  font-size:8pt;
}

.selentries {
  background-color:#E0E0A0;
  border:1px solid #0000FF;
  border-top:1px solid white;
  border-left:1px solid white;
  text-align:center;
  font-size:10pt;
}

/* unselected and selected group tabs */

.gtab a {
  background-color:#B0E0B0;
  padding-left:5px;
  padding-right:5px;
}

.gtab {
  background-color:#B0E0B0;
  border-right:1px solid #409040;
}

.sgtab a {
  color:white;
  padding-left:5px;
  padding-right:5px;
}

.sgtab {
  background-color:#486090;
  color:white;
  border-right:1px solid #084070;
}

.sgtab a:visited { color:white; } /* bug for IE */

/* unselected and selected logbook tabs */

.ltab a {
  background-color:#E0E0E0;
  padding-left:5px;
  padding-right:5px;
}

.ltab {
  background-color:#E0E0E0;
  border-right:1px solid gray;
}

.sltab a {
  background-color:#486090;
  color:white;
  padding-left:5px;
  padding-right:5px;
}

.sltab {
  background-color:#486090;
  color:white;
  border-right:1px solid #084070;
}

.sltab a:visited { color:white; } /* bug for IE */

/* logbook title, left, middle and right cell */

.title1 {
  background-color:#486090;
  border-bottom:1px solid gray;
  border-top:1px solid #E0E0E0;
  border-left:1px solid #E0E0E0;
  color:white;
  font-size:medium;
  font-family:sans-serif;
  text-align:left;
}

.title1 a:visited { color:#A0FFA0; }
.title1 a:link { color:#A0FFA0; }

.title2 {
  background-color:#486090;
  border-bottom:1px solid black;
  border-top:1px solid #E0E0E0;
  color:white;
  font-size:medium;
  font-family:sans-serif;
  text-align:center;
}

.title3 {
  border-bottom:1px solid black;
  border-top:1px solid #E0E0E0;
  border-right:0px solid gray;
  background-color:#486090;
  text-align:left;
}

/* main menu row */

.menuframe {
  border:0px solid black;
  border-top:1px solid gray;
  border-right:0px solid gray;
  border-left:0px solid gray;
  padding:3px;
  background-color:white;
}

.menu1 {
  text-align:left;
  font-size:10pt;
}

.menu2a {
  text-align:left;
  font-size:10pt;
}

.menu2b {
  text-align:right;
  font-size:10pt;
}

.menu3 {
  text-align:left;
  font-size:8pt;
  font-weight:bold;
}

.menu4 {
  text-align:right;
  font-size:10pt;
  vertical-align:middle;
}

/* frame table in listings */
.listframe {
  border:0px solid gray;
  border-top:0px solid gray;
  border-left:0pc solid gray;
  background-color:white;
  border:0px;
}

/* title row in listing */
.listtitle {
  border:0px solid black;
  border-top:1px solid gray;
  border-left:0px solid gray;
  background-color:white;
  text-align:left;
}

/* attachment line */

.attachment {
  border-left:1px solid gray;
  border-right:1px solid gray;
  border-bottom:1px solid gray;
  background-color:#FFFFB0;
  text-align:left;
}

/* threaded listing */
.thread {
  border:0px solid gray;
  border-top:0px solid gray;
  border-left:0px solid gray;
  background-color:white;
}

.threadreply {
  border:0px solid #808040;
  border-top:0px solid white;
  border-left:0px solid white;
  background-color:white;
  text-align:left;
}

/* attribute names and values on single message page */
.attribhead {
  background-color:white;
  border:0px solid gray;
  border-top:1px solid gray;
  border-bottom:1px solid gray;
  border-left:0px solid gray;
  padding:0px;
  font-size:12pt;
  font-family:sans-serif;
}

.attribname {
  width:150px;
  background-color:#486090;
  color:white;
  padding-left:5px;
  padding-right:5px;
  padding:3px;
  border:1px solid white;
}

.attribvalue {

/********************************************************************

   Name:         elogd.c
   Created by:   Stefan Ritt
   Copyright 2000 + Stefan Ritt

   ELOG is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   ELOG is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   In addition, as a special exception, the copyright holders give
   permission to link the code of portions of this program with the
   OpenSSL library under certain conditions as described in each
   individual source file, and distribute linked combinations
   including the two.
   You must obey the GNU General Public License in all respects
   for all of the code used other than OpenSSL.  If you modify
   file(s) with this exception, you may extend this exception to your
   version of the file(s), but you are not obligated to do so.  If you
   do not wish to do so, delete this exception statement from your
   version.  If you delete this exception statement from all source
   files in the program, then also delete it here.

   You should have received a copy of the GNU General Public License
   along with ELOG.  If not, see <http://www.gnu.org/licenses/>.


   Contents:     Web server program for Electronic Logbook ELOG

\********************************************************************/

#include "elogd.h"
#include "git-revision.h"

const char *_git_revision = GIT_REVISION;

BOOL running_as_daemon;         /* Running as a daemon/service? */
int elog_tcp_port;              /* Server's TCP port            */

static void (*printf_handler)(const char *);   /* Handler to printf for logging */
static void (*fputs_handler)(const char *);    /* Handler to fputs for logging  */
static FILE *current_output_stream = NULL;      /* Currently used output stream  */

char *return_buffer;
int return_buffer_size;
int strlen_retbuf;
int keep_alive;
char header_buffer[20000];
int return_length;
char host_name[256];
char referer[256];
char browser[256];
char config_file[256];
char resource_dir[256];
char logbook_dir[256];
char listen_interface[256];
char theme_name[80];
char http_host[256];
char http_user[256];

char _param[MAX_PARAM][NAME_LENGTH];
char _value[MAX_PARAM][NAME_LENGTH];
char _mtext[TEXT_SIZE];
char _cmdline[CMD_SIZE];
char *_attachment_buffer;
int _attachment_size;
int _max_content_length = MAX_CONTENT_LENGTH;
struct in_addr rem_addr;
char rem_host[256];
char rem_host_ip[256];
int _sock;
BOOL use_keepalive, enable_execute = FALSE;
BOOL ckedit_exist, image_magick_exist;
int _verbose_level, _current_message_id;
int _logging_level, _ssl_flag;

LOGBOOK *lb_list = NULL;

#define VERBOSE_URL     1
#define VERBOSE_INFO    2
#define VERBOSE_DEBUG   3

#ifdef HAVE_SSL
SSL *_ssl_con;
#endif

char *mname[] = {"January", "February", "March", "April", "May", "June", "July", "August", "September",
                 "October", "November", "December"
};

char attr_list[MAX_N_ATTR][NAME_LENGTH];
char attr_options[MAX_N_ATTR][MAX_N_LIST][NAME_LENGTH];
int attr_flags[MAX_N_ATTR];

char attr_list_default[][NAME_LENGTH] = {"Author", "Type", "Category", "Subject", ""};

char attr_options_default[][MAX_N_LIST][NAME_LENGTH] = {{""},
                                                        {"Routine", "Other"},
                                                        {"General", "Other"},
                                                        {""}
};

int attr_flags_default[] = {AF_REQUIRED, 0, 0, 0};

struct {
   char ext[32];
   char type[80];
} filetype[] = {

        {
                ".AI",   "application/postscript"},
        {
                ".ASC",  "text/plain"},
        {
                ".BZ2",  "application/x-bzip2"},
        {
                ".CFG",  "text/plain"},
        {
                ".CHRT", "application/x-kchart"},
        {
                ".CONF", "text/plain"},
        {
                ".CSH",  "application/x-csh"},
        {
                ".CSS",  "text/css"},
        {
                ".DOC",  "application/msword"},
        {
                ".DVI",  "application/x-dvi"},
        {
                ".EPS",  "application/postscript"},
        {
                ".GIF",  "image/gif"},
        {
                ".GZ",   "application/x-gzip"},
        {
                ".HTM",  "text/html"},
        {
                ".HTML", "text/html"},
        {
                ".ICO",  "image/x-icon"},
        {
                ".JPEG", "image/jpeg"},
        {
                ".JPG",  "image/jpeg"},
        {
                ".JS",   "application/x-javascript"},
        {
                ".KPR",  "application/x-kpresenter"},
        {
                ".KSP",  "application/x-kspread"},
        {
                ".KWD",  "application/x-kword"},
        {
                ".MP3",  "audio/mpeg"},
        {
                ".OGG",  "application/x-ogg"},
        {
                ".PDF",  "application/pdf"},
        {
                ".PNG",  "image/png"},
        {
                ".PS",   "application/postscript"},
        {
                ".RAM",  "audio/x-pn-realaudio"},
        {
                ".RM",   "audio/x-pn-realaudio"},
        {
                ".RM",   "audio/x-pn-realaudio"},
        {
                ".RM",   "audio/x-pn-realaudio"},
        {
                ".RPM",  "application/x-rpm"},
        {
                ".RTF",  "application/rtf"},
        {
                ".SH",   "application/x-sh"},
        {
                ".SVG",  "image/svg+xml"},
        {
                ".TAR",  "application/x-tar"},
        {
                ".TCL",  "application/x-tcl"},
        {
                ".TEX",  "application/x-tex"},
        {
                ".TGZ",  "application/x-gzip"},
        {
                ".TIF",  "image/tiff"},
        {
                ".TIFF", "image/tiff"},
        {
                ".TXT",  "text/plain"},
        {
                ".WAV",  "audio/x-wav"},
        {
                ".XLS",  "application/x-msexcel"},
        {
                ".XML",  "text/xml"},
        {
                ".XSL",  "text/xml"},
        {
                ".ZIP",  "application/x-zip-compressed"},
        {

                /* Open XML file types */
                ".DOCM", "application/vnd.ms-word.document.macroEnabled.12"},
        {
                ".DOCX", "application/vnd.openxmlformats-officedocument.wordprocessingml.document"},
        {
                ".DOTM", "application/vnd.ms-word.template.macroEnabled.12"},
        {
                ".DOTX", "application/vnd.openxmlformats-officedocument.wordprocessingml.template"},
        {
                ".PPSM", "application/vnd.ms-powerpoint.slideshow.macroEnabled.12"},
        {
                ".PPSX", "application/vnd.openxmlformats-officedocument.presentationml.slideshow"},
        {
                ".PPTM", "application/vnd.ms-powerpoint.presentation.macroEnabled.12"},
        {
                ".PPTX", "application/vnd.openxmlformats-officedocument.presentationml.presentation"},
        {
                ".XLSB", "application/vnd.ms-excel.sheet.binary.macroEnabled.12"},
        {
                ".XLSM", "application/vnd.ms-excel.sheet.macroEnabled.12"},
        {
                ".XLSX", "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet"},
        {
                ".XPS",  "application/vnd.ms-xpsdocument"},
        {

                "",      ""},};

struct {
   char language[32];
   char abbrev[32];
} lang_table[] = {

        {"brazilian",    "br"},
        {"bulgarian",    "bg"},
        {"czech",        "cz"},
        {"danish",       "dk"},
        {"dutch",        "nl"},
        {"french",       "fr"},
        {"german",       "de"},
        {"indonesia",    "id"},
        {"italian",      "it"},
        {"japanese",     "jp"},
        {"polish",       "pl"},
        {"ru_CP1251",    "ru"},
        {"slowak",       "sk"},
        {"spanish",      "es"},
        {"swedish",      "se"},
        {"turkish",      "tr"},
        {"zh_CN-GB2314", "zh"},
        {"zh_CN-UTF8",   "zh"},
        {"",             ""}
};

char _convert_cmd[256];
char _identify_cmd[256];

#ifdef OS_WINNT
int run_service(void);
#endif

#ifdef OS_UNIX
gid_t orig_gid;                 /* Original effective GID before dropping privilege */
uid_t orig_uid;                 /* Original effective UID before dropping privilege */
char pidfile[256];              /* Pidfile name                                     */
#endif

#ifdef __CYGWIN__               /* bug in cygwin, 'timezone' not linked automatically */
long _timezone;
#endif

/*---- Funcions from the MIDAS library -----------------------------*/

#define my_toupper(_c)    ( ((_c)>='a' && (_c)<='z') ? ((_c)-'a'+'A') : (_c) )
#define my_tolower(_c)    ( ((_c)>='A' && (_c)<='Z') ? ((_c)-'A'+'a') : (_c) )

BOOL strieq(const char *str1, const char *str2) {
   char c1, c2;

   if (str1 == NULL && str2 == NULL)
      return TRUE;
   if (str1 == NULL || str2 == NULL)
      return FALSE;
   if (strlen(str1) != strlen(str2))
      return FALSE;

   while (*str1) {
      c1 = *str1++;
      c2 = *str2++;

<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">

<!--
	Copyright (c) 2005-06-17 Peter Eriksson (peter@ifm.liu.se)

	This manifest can be used to manage an elog daemon using the 
	Solaris SMF subsystem.

	Import this manifest using: 

		svccfg -v import elog.xml
	
        Then activate the daemon with:

		svcadm enable site/elog
-->

<service_bundle type='manifest' name='IFM:elog'>

<service
	name='site/elog'
	type='service'
	version='1'>

        <single_instance />

	<!-- Need / & /usr filesystems mounted, /var mounted read/write -->
	<dependency
		name='fs-local'
		type='service'
		grouping='require_all'
		restart_on='none'>
		<service_fmri value='svc:/system/filesystem/local' />
	</dependency>

        <dependency
            name='network-service'
            grouping='require_all'
            restart_on='none'
            type='service'>
                <service_fmri value='svc:/network/service' />
        </dependency>

        <dependency
            name='name-services'
            grouping='require_all'
            restart_on='refresh'
            type='service'>
                <service_fmri value='svc:/milestone/name-services' />
        </dependency>
	
	<exec_method
		type='method'
		name='start'
		exec='/ifm/sbin/elogd -D -c /ifm/etc/elogd.cfg'
		timeout_seconds='60'>
	</exec_method>

	<exec_method
		type='method'
		name='stop'
		exec=':kill'
		timeout_seconds='30'>
	</exec_method>

	<instance name='default' enabled='false' />

	<stability value='Evolving' />

	<template>
		<common_name>
			<loctext xml:lang='C'>
			Electronic Logbook server
			</loctext>
		</common_name>
		<documentation>
			<manpage title='elogd' section='1' manpath='/usr/local/man' />
		</documentation>
	</template>
</service>

</service_bundle>

 setuid(2)							   setuid(2)




 NAME
      setuid(), setgid() - set user and group IDs

 SYNOPSIS
      #include <unistd.h>

      int setuid(uid_t uid);

      int setgid(gid_t gid);

 DESCRIPTION
      setuid() sets the real-user-ID (ruid), effective-user-ID (euid),
      and/or saved-user-ID (suid) of the calling process.  If the Security
      Containment product is installed, these interfaces treat a process
      observing CHSUBJIDENT as a privileged process.  Otherwise, only
      processes with an euid of zero are treated as privileged processes.
      See privileges(5) for more information on Security Containment and
      fine-grained privileges.

      The following conditions govern setuid's behavior:

	   +  If the process is privileged, setuid() sets the ruid, euid,
	      and suid to uid.

	   +  If the process is not privileged and the argument uid is equal
	      to the ruid or the suid, setuid() sets the euid to uid; the
	      ruid and suid remain unchanged.  (If a set-user-ID program is
	      not running as superuser, it can change its euid to match its
	      ruid and reset itself to the previous euid value.)

	   +  If the process is not privileged, the argument uid is equal to
	      the euid, and the calling process has the PRIV_SETRUGID
	      privilege, setuid() sets the ruid to uid; the euid and suid
	      remain unchanged.

      setgid() sets the real-group-ID (rgid), effective-group-ID (egid),
      and/or saved-group-ID (sgid) of the calling process.  The following
      conditions govern setgid()'s behavior:

	   +  If the process is privileged, setgid() sets the rgid and egid
	      to gid.

	   +  If the process is not privileged and the argument gid is equal
	      to the rgid or the sgid, setgid() sets the egid to gid; the
	      rgid and sgid remain unchanged.

	   +  If the process is not privileged, the argument gid is equal to
	      the egid, and the calling process has the PRIV_SETRUGID
	      privilege, setgid() sets the rgid to gid; the egid and sgid
	      remain unchanged.




 Hewlett-Packard Company	    - 1 -      HP-UX 11i Version 2: May 2006






 setuid(2)							   setuid(2)




    Security Restrictions
      Some or all of the actions associated with this system call require
      the CHSUBJIDENT privilege.  Processes owned by the superuser have this
      privilege.  Processes owned by other users may have this privilege,
      depending on system configuration.

      See privileges(5) for more information about privileged access on
      systems that support fine-grained privileges.

 RETURN VALUE
      Upon successful completion, setuid() and setgid() return 0; otherwise,
      they return -1 and set errno to indicate the error.

 ERRORS
      setuid() and setgid() fail and return -1 if any of the following
      conditions are encountered:

	   [EPERM]	  None of the conditions above are met.

	   [EINVAL]	  uid (gid) is not a valid user (group) ID.

 WARNINGS
      It is recommended that the PRIV_SETRUGID capability be avoided, as it
      is provided for backward compatibility.  This feature may be modified
      or dropped from future HP-UX releases.  When changing the real user ID
      and real group ID, use of setresuid() and setresgid() (see
      setresuid(2)) is recommended instead.

 AUTHOR
      setuid() was developed by AT&T, the University of California,
      Berkeley, and HP.

      setgid() was developed by AT&T.

 SEE ALSO
      exec(2), getuid(2), setresuid(2), privileges(5).

 STANDARDS CONFORMANCE
      setuid(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.1

      setgid(): AES, SVID2, SVID3, XPG2, XPG3, XPG4, FIPS 151-2, POSIX.1













 Hewlett-Packard Company	    - 2 -      HP-UX 11i Version 2: May 2006

 setreuid(2)							 setreuid(2)




 NAME
      setreuid - set real and effective user IDs

 SYNOPSIS
      #include <unistd.h>

      int setreuid(uid_t ruid, uid_t euid);

 DESCRIPTION
      The setreuid() function sets the real and effective user IDs of the
      current process to the values specified by the ruid and euid
      arguments. If ruid or euid is -1, the corresponding effective or real
      user ID of the current process is left unchanged.

      A process with appropriate privileges can set either ID to any value.
      An unprivileged process can only set the effective user ID if the euid
      argument is equal to either the real, effective, or saved user ID of
      the process.

      It is unspecified whether a process without appropriate privileges is
      permitted to change the real user ID to match the current real,
      effective or saved user ID of the process.

 RETURN VALUE
      Upon successful completion, 0 is returned. Otherwise, -1 is returned
      and errno is set to indicate the error.

 ERRORS
      The setreuid() function will fail if:

	   [EINVAL]		    The value of the ruid or euid argument
				    is invalid or out-of-range.

	   [EPERM]		    The current process does not have
				    appropriate privileges, and either an
				    attempt was made to change the effective
				    user ID to a value other than the real
				    user ID or the saved set-user-ID or an
				    attempt was made to change the real user
				    ID to a value not permitted by the
				    implementation.

 SEE ALSO
      getuid(2), setuid(2), <unistd.h>.

 CHANGE HISTORY
      First released in Issue 4, Version 2.







 Hewlett-Packard Company	    - 1 -   HP-UX 11i Version 2: August 2003

 setresuid(2)							setresuid(2)




 NAME
      setresuid, setresgid - set real, effective, and saved user and group
      IDs

 SYNOPSIS
      #include <unistd.h>

      int setresuid(uid_t ruid, uid_t euid, uid_t suid);

      int setresgid(gid_t rgid, gid_t egid, gid_t sgid);

 DESCRIPTION
      setresuid() sets the real, effective and/or saved user ID of the
      calling process.

      If the current real, effective or saved user ID is equal to that of a
      user having appropriate privileges, setresuid() sets the real,
      effective and saved user IDs to ruid, euid, and suid, respectively.
      Otherwise, setresuid() only sets the real, effective, and saved user
      IDs if ruid, euid, and suid each match at least one of the current
      real, effective, or saved user IDs.

      If ruid, euid, or suid is -1, setresuid() leaves the current real,
      effective or saved user ID unchanged.

      setresgid() sets the real, effective and/or saved group ID of the
      calling process.

      If the current real, effective or saved user ID is equal to that of a
      user having appropriate privileges, setresgid() sets the real,
      effective, and saved group ID to rgid, egid, and sgid, respectively.
      Otherwise, setresgid() only sets the real, effective and saved group
      ID if rgid, egid, and sgid each match at least one of the current
      real, effective or saved group ID.

      If rgid, egid, or sgid is -1, setresgid() leaves the current real,
      effective or saved group ID unchanged.

    Security Restrictions
      Some or all of the actions associated with this system call require
      the PRIV_CHSUBJIDENT privilege (CHSUBJIDENT).  Processes owned by the
      superuser will have this privilege.  Processes owned by other users
      may have this privilege, depending on system configuration.  See
      privileges(5) for more information about privileged access on systems
      that support fine-grained privileges.

 RETURN VALUE
      Upon successful completion, setresuid() and setresgid() return 0;
      otherwise, they return -1 and set errno to indicate the error.





 Hewlett-Packard Company	    - 1 -      HP-UX 11i Version 2: May 2005






 setresuid(2)							setresuid(2)




 ERRORS
      setresuid() and setresgid() fail if any of the following conditions
      are encountered:

	   [EINVAL]	  ruid, euid, or suid (rgid, egid, or sgid) is not a
			  valid user (group) ID.

	   [EPERM]	  None of the conditions above are met.

 AUTHOR
      setresuid() and setresgid() were developed by HP.

 SEE ALSO
      exec(2), getuid(2), setuid(2).








































 Hewlett-Packard Company	    - 2 -      HP-UX 11i Version 2: May 2005

### Here be things to make the elogd daemon invisibly secure under an
### Apache SSL proxy virtual host.  Arrrrrr!
### ----This config file be mostly written by Jonathan Hanson, 11/23/04
### ----With some help from a few old salts on the net.



### This be the first instance of SSL in our setup, so the SSL module
### Must be called.  This can be commented out if it don't put wind in
### your sails.
LoadModule ssl_module modules/mod_ssl.so

### Ahoy, ye scurvy land dogs! Listen to the SSL port (443) or may the
### sea beasts take ye!
Listen 443

### Make a virtual host at the default server name, and assign it port 443.
<VirtualHost _default_:443>
	### Here be standard configuration for the Virtual Host
	ServerAdmin your_e-mail_address
	ServerName _default_:443
	RequestHeader set Front-End-Https "On"
	
	### This be the path to the elog directory 
	### (This didn't seem to make any difference, but it be a good
	###  idea nonetheless)
	DocumentRoot /usr/local/elog
	
	### Here be the setup for the SSL component of the Virtual Host
	SSLEngine On
	SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
	SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.pem
	
	### Here be the setup options for the Proxy module
	ProxyRequests Off
	ProxyPreserveHost On
	
	### This be the root of the new Virtual Host, and it should be
	### redirected to the port the elogd server is listening to 
	### (8079 on our poop deck).
	<Location />
		ProxyPass http://your.host.name:8079/
		ProxyPassReverse http://your.host.name:8079/
		SSLRequireSSL
	</Location>

	### Shiver me timbers!  A firewall can be laid across the elog
	### port to hinder direct access from the outside world to the elog
	### daemon.  This'll make the scurvy wretches come in through the apache
	### proxy virtual host, and batten down the hatches on the elog in general.

</VirtualHost>



### Our previous elog configuration was at http://your.host.name:8080 and some of our
### users made static HTML links to other posts in their posts and email.  They be sleeping 
### in Davy Jones's locker in the briney deep now, but we be needing to make these posts 
### backward-compatible.  We be changing the port Elogd listens to (as above) to 8079, and
### then we be using another new virtual host at port 8080 to redirect to the new SSL URL.
### So it appears to the landlubbers outside as if a normal elog server is listening to port
### 8080, but in reality it be a Virtual Host redirecting through the other SSL virtual host
### which then be passing it on to the port the elog server really be listening to.
### If ye not be needing this backwards compatability, the following section can be made
### to walk the plank.

### I won't be telling ye twice, ye slimy bilge rat!  Pay attention to what 
### used to be the old elog port(8080).
Listen 8080

<VirtualHost _default_:8080>
	### Here be standard configuration for the Virtual Host
	ServerAdmin your_e-mail_address
	ServerName _default_:8080
		
	### This be the path to the html directory 
	### (This didn't seem to make any difference, but it be a good
	###  idea nonetheless)
	DocumentRoot /httpd/html
	
	### Here be the dark magic of mod_rewrite.  Quake in your boots ye dogs!
	<IfModule mod_rewrite.c>
		RewriteEngine On
		RewriteRule ^/(.*) https://your.host.name/$1 [NC,R=301,L]
	</IfModule>
	
</VirtualHost>

### In the end, elog be reachable through either https://your.host.name/ 
### or http://your.host.name:8080/ , though the latter will be rewritten
### to the former as soon as the request be made.  This be satisfying our 
### needs for backwards compatbility with old URLs, while ensuring modern 
### secure SSL support.  Beware matey, recognize that we also had to change
### the port that elog listens to, and then add a URL line in the elogd.cfg
### file:
###      port = 8079
###      URL = https://your.host.name/
### Also a firewall was brought up and told to allow through only ports 
### 80(html), 443(SSL), and 8080(the elog stand-in) and of course any other 
### ports ye may need for other applications.

diff --git a/buildrpm b/buildrpm
index 9d21f4a..dba7067 100755
--- a/buildrpm
+++ b/buildrpm
@@ -12,7 +12,7 @@ set release = $argv[2]
 set dir = /tmp/elog-$version
 set archive = elog-$version-$release.tar.gz
 
-perl -wapi.bak -e 's&^(Version:\s+).*$&${1}'"${version}"'&;s&^(Release:\s+).*$&${1}'"${release}"'&;' elog.spec
+#perl -wapi.bak -e 's&^(Version:\s+).*$&${1}'"${version}"'&;s&^(Release:\s+).*$&${1}'"${release}"'&;' elog.spec
 
 # create temporary directory
 rm -Rf $dir
@@ -68,19 +68,33 @@ rm -Rf $dir
 
 # transfer archive
 echo Transfer archive...
-cp /tmp/$archive ~ritt/html/elog/download/tar/
-cp /tmp/$archive ~ritt/html/elog/download/tar/elog-latest.tar.gz
 cp /tmp/$archive ~/rpmbuild/SOURCES/elog-$version.tar.gz
-cd ~ritt/elog
-cp -f doc/ChangeLog ~ritt/html/elog/download/ChangeLog
+# If Stefan...
+if ( -d /home/ritt ) then
+  echo "Manager mode"
+  if ( -d ~ritt/html/elog/download/tar ) then
+    cp /tmp/$archive ~ritt/html/elog/download/tar/
+    cp /tmp/$archive ~ritt/html/elog/download/tar/elog-latest.tar.gz
+    cd ~ritt/elog
+    cp -f doc/ChangeLog ~ritt/html/elog/download/ChangeLog
+  endif
+endif
+cd -
 rm -f /tmp/$archive
 
+echo Cleanup $version-$release rpms
+rm -f ~/rpmbuild/RPMS/*/elog*${version}-${release}*.rpm
+rm -f ~/rpmbuild/SRPMS/elog*${version}-${release}*.rpm
 # building RPMs
-echo Build RPMs...
-rm -f ~/rpmbuild/RPMS/x86_64/*
-rm -f ~/rpmbuild/SRPMS/*
-rpmbuild -ba elog.spec || exit $?
-cp ~/rpmbuild/RPMS/x86_64/elog*rpm ~ritt/html/elog/download/RPMS/
-cp ~/rpmbuild/RPMS/x86_64/elog-$version-$release.x86_64.rpm ~ritt/html/elog/download/RPMS/elog-latest.x86_64.rpm
-cp ~/rpmbuild/SRPMS/elog*rpm ~ritt/html/elog/download/SRPMS/
-cp ~/rpmbuild/SRPMS/elog-$version-$release.src.rpm ~ritt/html/elog/download/SRPMS/elog-latest.src.rpm
+echo Build RPMs..
+rpmbuild -ba --define "version ${version}" --define "release ${release}" elog.spec || exit $?
+
+# If Stefan...
+if ( -d /home/ritt ) then
+  if ( -d ~ritt/html/elog/download/tar ) then
+    cp ~/rpmbuild/RPMS/x86_64/elog*rpm ~ritt/html/elog/download/RPMS/
+    cp ~/rpmbuild/RPMS/x86_64/elog-$version-$release.x86_64.rpm ~ritt/html/elog/download/RPMS/elog-latest.x86_64.rpm
+    cp ~/rpmbuild/SRPMS/elog*rpm ~ritt/html/elog/download/SRPMS/
+    cp ~/rpmbuild/SRPMS/elog-$version-$release.src.rpm ~ritt/html/elog/download/SRPMS/elog-latest.src.rpm
+  endif
+endif
diff --git a/elog.spec b/elog.spec
index 16add8f..8397eab 100755
--- a/elog.spec
+++ b/elog.spec
@@ -1,9 +1,13 @@
-# OpenSSH privilege separation requires a user & group ID
+# ELOG weblog application
+# rpmbuild -ba --define 'version 3.1.4' --define 'release 2' --define "date $(LC_TIME=En date '+%a %b %d %Y')" elog.spec
+ 
+#define	date	$(LC_TIME=En date '+%a %b %d %Y')      
+%define build_timestamp %(LC_TIME=En date '+%a %b %d %Y')
 
 Name:       elog
 Summary:    elog is a standalone electronic web logbook
-Version:    3.1.4
-Release:    2
+Version:    %version
+Release:    %release%{?dist}
 License:    GPL
 Group:      Applications/Networking
 Source:     http://elog.psi.ch/elog/download/elog-%{version}.tar.gz
@@ -41,6 +45,8 @@ access control, etc. Moreover, a single server can host several weblogs, and
 each weblog can be totally different from the rest. 
 
 %changelog
+* %{build_timestamp} Stefan Ritt <stefan.ritt@psi.ch> %version-%release
+- Updated from git 
 * Wed Sep 26 2018 Stefan Ritt <stefan.ritt@psi.ch>
 - Made adjustments for new elog server and RH7
 * Fri Aug 29 2014 Stefan Ritt <stefan.ritt@psi.ch>
@@ -72,7 +78,7 @@ each weblog can be totally different from the rest.
    -g elog -M -r elog 2>/dev/null || :
 
 %build
-make
+make CFLAGS='-O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -g'
 sed "s#\@PREFIX\@#%{prefix}#g" elogd.init_template > elogd.init
 
 %install
diff --git a/elogd.init b/elogd.init
index 5d4e7ee..e04143c 100644
--- a/elogd.init
+++ b/elogd.init
@@ -6,6 +6,9 @@
 # config: /usr/local/elog/elogd.cfg
 # pidfile: /var/run/elogd.pid
 
+# RHEL
+[ -f /etc/init.d/functions ] && . /etc/init.d/functions
+
 # Check for the config file
 if [ ! -f /usr/local/elog/elogd.cfg ]; then
     exit 0
diff --git a/elogd.init_template b/elogd.init_template
index e94b5d7..bb1b330 100755
--- a/elogd.init_template
+++ b/elogd.init_template
@@ -6,6 +6,9 @@
 # config: @PREFIX@/elog/elogd.cfg
 # pidfile: /var/run/elogd.pid
 
+# RHEL
+[ -f /etc/init.d/functions ] && . /etc/init.d/functions
+
 # Check for the config file
 if [ ! -f @PREFIX@/elog/elogd.cfg ]; then
     exit 0

diff --git a/Makefile b/Makefile
index d8eecba..87cb502 100644
--- a/Makefile
+++ b/Makefile
@@ -23,16 +23,32 @@ RCDIR      = $(ROOT)/etc/rc.d/init.d
 SRVDIR     = $(ROOT)/usr/lib/systemd/system
 
 # flag for SSL support
+ifdef USESSL
 USE_SSL    = 1
+else
+USE_SSL    = 0
+endif
 
 # flag for Kerberos support, please turn on if you need Kerberos
+ifdef USEKRB5
+USE_KRB5   = 1
+else
 USE_KRB5   = 0
+endif
 
 # flag for LDAP support, please turn on if you need LDAP
+ifdef USELDAP
+USE_LDAP   = 1
+else
 USE_LDAP   = 0
+endif
 
 # flag for PAM support, please turn on if you need PAM
+ifdef USEPAM
+USE_PAM    = 1
+else
 USE_PAM    = 0
+endif
 
 #############################################################
 
diff --git a/buildrpm b/buildrpm
index 1c0b9bc..8dde819 100755
--- a/buildrpm
+++ b/buildrpm
@@ -1,17 +1,38 @@
 #!/bin/csh
-# Usage: build [-n] <version> <release>
+# Usage: build [-n] <version> <release> [-krb5] [-ldap] [-pam] [-ssl]
 # Build ELOG distribution
 
 if ($#argv < 2) then
-  echo "Usage: build <version> <release>"
+  echo "Usage: build <version> <release> [-krb5] [-ldap] [-pam] [-ssl]"
   exit
 endif
  
 set version = $argv[1]
 set release = $argv[2]
+set i = 0
+set BUILDOPTS=""
+foreach argument ($argv)
+  set i=`expr $i + 1`
+  if ($i <= 2) continue
+  switch ($argument)
+    case "-ldap":
+       set BUILDOPTS="$BUILDOPTS --with ldap"
+       breaksw
+    case "-pam":
+       set BUILDOPTS="$BUILDOPTS --with pam"
+       breaksw
+    case "-ssl":
+       set BUILDOPTS="$BUILDOPTS --with ssl"
+       breaksw
+    case "-krb5":
+       set BUILDOPTS="$BUILDOPTS --with krb5"
+       breaksw
+  endsw
+end
+
 set dist = `rpm --eval %{\?dist}`
 set dir = /tmp/elog-$version
-set archive = elog-$version.tar.gz
+set archive = elog-$version-$release.tar.gz
 
 # create temporary directory
 rm -Rf $dir
@@ -65,7 +86,8 @@ rm -Rf $dir
 
 # transfer archive
 echo Transfer archive...
-mkdir -p ~/rpmbuild/SOURCES && cp /tmp/$archive ~/rpmbuild/SOURCES/elog-$version.tar.gz
+[ ! -d ~/rpmbuild/SOURCES ] && mkdir -p ~/rpmbuild/SOURCES 
+cp /tmp/$archive ~/rpmbuild/SOURCES/elog-$version-$release.tar.gz
 
 # if running on at PSI copy to download area
 if (`hostname` == 'elog01.psi.ch') then
@@ -75,6 +97,8 @@ if (`hostname` == 'elog01.psi.ch') then
     cp -v /tmp/$archive ~ritt/html/elog/download/tar/elog-latest.tar.gz
     cp -vf doc/ChangeLog ~ritt/html/elog/download/ChangeLog
   endif
+  # define Factory Packager
+  set BUILDOPTS="${BUILDOPTS} --define \"packager Stefan Ritt <stefan.ritt@psi.ch>\""
 endif
 rm -f /tmp/$archive
 
@@ -83,8 +107,13 @@ rm -f ~/rpmbuild/RPMS/*/elog*${version}-${release}*.rpm
 rm -f ~/rpmbuild/SRPMS/elog*${version}-${release}*.rpm
 
 # building RPMs
+cp elog.spec.template ~/rpmbuild/SPECS/elog.spec
+sed -i "s/__ELOGVER__/${version}/;s/__ELOGREL__/${release}/" ~/rpmbuild/SPECS/elog.spec
 echo Build RPMs...
-rpmbuild -ba --define "version ${version}" --define "release ${release}" elog.spec || exit $?
+set factorydate = `env LC_TIME=C date '+%a %b %d %Y'`
+rpmbuild -ba ${BUILDOPTS} --define "factorydate ${factorydate}" \
+	--define "version ${version}" --define "elogrel ${release}" \
+	~/rpmbuild/SPECS/elog.spec || exit $?
 
 # if running on at PSI copy to download area
 if (`hostname` == 'elog01.psi.ch') then
diff --git a/elog.spec b/elog.spec
deleted file mode 100755
index 8397eab..0000000
--- a/elog.spec
+++ /dev/null
@@ -1,107 +0,0 @@
-# ELOG weblog application
-# rpmbuild -ba --define 'version 3.1.4' --define 'release 2' --define "date $(LC_TIME=En date '+%a %b %d %Y')" elog.spec
- 
-#define	date	$(LC_TIME=En date '+%a %b %d %Y')      
-%define build_timestamp %(LC_TIME=En date '+%a %b %d %Y')
-
-Name:       elog
-Summary:    elog is a standalone electronic web logbook
-Version:    %version
-Release:    %release%{?dist}
-License:    GPL
-Group:      Applications/Networking
-Source:     http://elog.psi.ch/elog/download/elog-%{version}.tar.gz
-Vendor:     Stefan Ritt <stefan.ritt@psi.ch>
-URL:        http://elog.psi.ch/elog
-BuildRoot:  /tmp/%{name}-root
-Prefix:     /usr/local
-BuildRequires: openssl-devel >= 0.9.8e
-
-%description
-ELOG is part of a family of applications known as weblogs. 
-Their general purpose is : 
-
-1. To make it easy for people to put information online in a chronological
-   fashion, in the form of short, time-stamped text messages ("entries") 
-   with optional HTML markup for presentation, and optional file attachments 
-   (images, archives, etc.) 
-
-2. To make it easy for other people to access this information through a 
-   Web interface, browse entries, search, download files, and optionally add, 
-   update, delete or comment on entries. 
-
-ELOG is a remarkable implementation of a weblog in at least two respects : 
-
-- Its simplicity of use: you don't need to be a seasoned server operator 
-and/or an experimented database administrator to run ELOG ; one executable 
-file (under Unix or Windows), a simple configuration text file, and it works. 
-No Web server or relational database required. It is also easy to translate 
-the interface to the appropriate language for your users. 
-
-- Its versatility: through its single configuration file, ELOG can be made 
-to display an infinity of variants of the weblog concept. There are options 
-for what to display, how to display it, what commands are available and to whom, 
-access control, etc. Moreover, a single server can host several weblogs, and 
-each weblog can be totally different from the rest. 
-
-%changelog
-* %{build_timestamp} Stefan Ritt <stefan.ritt@psi.ch> %version-%release
-- Updated from git 
-* Wed Sep 26 2018 Stefan Ritt <stefan.ritt@psi.ch>
-- Made adjustments for new elog server and RH7
-* Fri Aug 29 2014 Stefan Ritt <stefan.ritt@psi.ch>
-- Added BuildRequires, thanks to Stefan Roiser from CERN
-* Fri Oct 21 2005 Stefan Ritt <stefan.ritt@psi.ch>
-- Added resources/ directory
-* Fri Mar 14 2003 Stefan Ritt <stefan.ritt@psi.ch>
-- Added %post to change ownership of elog files
-* Thu Jan 30 2003 Stefan Ritt <stefan.ritt@psi.ch>
-- Added installation of man pages, thanks to Serge Droz <serge.droz@psi.ch>
-* Tue Aug 13 2002 Stefan Ritt <stefan.ritt@psi.ch>
-- Added elog group and user, thanks to Nicolas Chuche [nchuche@teaser.fr]
-* Tue Jun 18 2002 Stefan Ritt <stefan.ritt@psi.ch>
-- Put elogd.init into TAR file, add logbooks directory, put elogd in sbin/
-* Tue Jun 18 2002 Serge Droz <serge.droz@psi.ch>
-- Update to 2.0.0
-* Mon Jun  3 2002 Serge Droz <serge.droz@psi.ch>
-- Update to 1.3.6 
-* Fri May 31 2002 Serge Droz <serge.droz@psi.ch>
-- Initial RPM
-
-
-%prep
-%setup -q
-
-%pre
-%{_sbindir}/groupadd -r elog 2>/dev/null || :
-%{_sbindir}/useradd -d / -s /bin/false \
-   -g elog -M -r elog 2>/dev/null || :
-
-%build
-make CFLAGS='-O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -g'
-sed "s#\@PREFIX\@#%{prefix}#g" elogd.init_template > elogd.init
-
-%install
-make install ROOT=$RPM_BUILD_ROOT MANDIR=$RPM_BUILD_ROOT%{_mandir}
-
-%post
-chown -R elog:elog $RPM_BUILD_ROOT%{prefix}/elog
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-/etc/rc.d/init.d/elogd
-%{_mandir}/man1/*
-%{_mandir}/man8/*
-%doc	README COPYING doc
-%defattr(-,elog,elog)
-%prefix/bin/*
-%prefix/sbin/elogd
-%prefix/elog/resources
-%prefix/elog/ssl
-%prefix/elog/themes
-%prefix/elog/scripts
-%prefix/elog/logbooks
-%config(noreplace) %prefix/elog/elogd.cfg
diff --git a/elog.spec.template b/elog.spec.template
--- a/elog.spec.template
+++ b/elog.spec.template
0a1,139
> # ELOG weblog application
> # rpmbuild -ba --define 'elogver 3.1.4' --define 'elogrel 2' --with ssl --with pam --with ldap --with krb5 --define 'factorydate date'
>  
> # define date of build for changelog and default release
> %define build_timestamp %(LC_TIME=C date '+%a %b %d %Y')
> %{!?factorydate: %define factorydate %build_timestamp}
> 
> # default version and release
> %{!?elogver: %define elogver __ELOGVER__ }
> %{!?elogrel: %define elogrel __ELOGREL__ }
> # default release is build date
> %{!?elogrel: %define elogrel %{build_timestamp} }
> 
> # Build options :
> # Read: If neither macro exists, then add the default definition.
> %{?_with_krb5: %define _with_krb5 USEKRB5=1}
> %{?_with_ldap: %define _with_ldap USELDAP=1}
> %{?_with_pam: %define _with_pam USEPAM=1}
> %{?_with_ssl: %define _with_ssl USESSL=1}
> # Default build options are with SSL 
> %{!?_with_ssl: %{!?_without_ssl: %define _with_ssl USESSL=1}}
> # builder info
> %define whoami %(eval who am i | awk '{print $1}')
> %define HOSTNAME %(hostname)
> %{!?packager: %define packager %{whoami} %{whoami}@%{HOSTNAME}}
> 
> Name:       elog
> Summary:    elog is a standalone electronic web logbook
> Version:    %elogver
> Release:    %elogrel%{?customrel}%{?dist}
> License:    GPL
> Group:      Applications/Networking
> Source:     http://elog.psi.ch/elog/download/elog-%{elogver}-%{elogrel}.tar.gz
> Vendor:     Stefan Ritt <stefan.ritt@psi.ch>
> URL:        http://elog.psi.ch/elog
> BuildRoot:  /tmp/%{name}-root
> Prefix:     /usr/local
> # Add build dependencies for pam, ssl and ldap features if enabled.
> # Note: Tag tokens must start at beginning-of-line.
> #
> # Read: If feature is enabled, then add the build dependency.
> %{?_with_krb5:BuildRequires: krb5-devel}
> %{?_with_krb5:Requires: krb5-libs}
> %{?_with_ldap:BuildRequires: openldap-devel >= 2.4.1}
> %{?_with_ldap:Requires: openldap >= 2.4.1}
> %{?_with_pam:BuildRequires: pam-devel >= 1.1.1}
> %{?_with_ssl:BuildRequires: openssl-devel >= 0.9.8e}
> 
> %description
> ELOG is part of a family of applications known as weblogs. 
> Their general purpose is : 
> 
> 1. To make it easy for people to put information online in a chronological
>    fashion, in the form of short, time-stamped text messages ("entries") 
>    with optional HTML markup for presentation, and optional file attachments 
>    (images, archives, etc.) 
> 
> 2. To make it easy for other people to access this information through a 
>    Web interface, browse entries, search, download files, and optionally add, 
>    update, delete or comment on entries. 
> 
> ELOG is a remarkable implementation of a weblog in at least two respects : 
> 
> - Its simplicity of use: you don't need to be a seasoned server operator 
> and/or an experimented database administrator to run ELOG ; one executable 
> file (under Unix or Windows), a simple configuration text file, and it works. 

# ELOG weblog application
# rpmbuild -ba --define 'elogver 3.1.4' --define 'elogrel 2' --with ssl --with pam --with ldap --with krb5 --define 'factorydate date'
 
# define date of build for changelog and default release
%define build_timestamp %(LC_TIME=C date '+%a %b %d %Y')
%{!?factorydate: %define factorydate %build_timestamp}

# default version and release
%{!?elogver: %define elogver __ELOGVER__ }
%{!?elogrel: %define elogrel __ELOGREL__ }
# default release is build date
%{!?elogrel: %define elogrel %{build_timestamp} }

# Build options :
# Read: If neither macro exists, then add the default definition.
%{?_with_krb5: %define _with_krb5 USEKRB5=1}
%{?_with_ldap: %define _with_ldap USELDAP=1}
%{?_with_pam: %define _with_pam USEPAM=1}
%{?_with_ssl: %define _with_ssl USESSL=1}
# Default build options are with SSL 
%{!?_with_ssl: %{!?_without_ssl: %define _with_ssl USESSL=1}}
# builder info
%define whoami %(eval who am i | awk '{print $1}')
%define HOSTNAME %(hostname)
%{!?packager: %define packager %{whoami} %{whoami}@%{HOSTNAME}}

Name:       elog
Summary:    elog is a standalone electronic web logbook
Version:    %elogver
Release:    %elogrel%{?customrel}%{?dist}
License:    GPL
Group:      Applications/Networking
Source:     http://elog.psi.ch/elog/download/elog-%{elogver}-%{elogrel}.tar.gz
Vendor:     Stefan Ritt <stefan.ritt@psi.ch>
URL:        http://elog.psi.ch/elog
BuildRoot:  /tmp/%{name}-root
Prefix:     /usr/local
# Add build dependencies for pam, ssl and ldap features if enabled.
# Note: Tag tokens must start at beginning-of-line.
#
# Read: If feature is enabled, then add the build dependency.
%{?_with_krb5:BuildRequires: krb5-devel}
%{?_with_krb5:Requires: krb5-libs}
%{?_with_ldap:BuildRequires: openldap-devel >= 2.4.1}
%{?_with_ldap:Requires: openldap >= 2.4.1}
%{?_with_pam:BuildRequires: pam-devel >= 1.1.1}
%{?_with_ssl:BuildRequires: openssl-devel >= 0.9.8e}

%description
ELOG is part of a family of applications known as weblogs. 
Their general purpose is : 

1. To make it easy for people to put information online in a chronological
   fashion, in the form of short, time-stamped text messages ("entries") 
   with optional HTML markup for presentation, and optional file attachments 
   (images, archives, etc.) 

2. To make it easy for other people to access this information through a 
   Web interface, browse entries, search, download files, and optionally add, 
   update, delete or comment on entries. 

ELOG is a remarkable implementation of a weblog in at least two respects : 

- Its simplicity of use: you don't need to be a seasoned server operator 
and/or an experimented database administrator to run ELOG ; one executable 
file (under Unix or Windows), a simple configuration text file, and it works. 
No Web server or relational database required. It is also easy to translate 
the interface to the appropriate language for your users. 

- Its versatility: through its single configuration file, ELOG can be made 
to display an infinity of variants of the weblog concept. There are options 
for what to display, how to display it, what commands are available and to whom, 
access control, etc. Moreover, a single server can host several weblogs, and 
each weblog can be totally different from the rest. 

%changelog
* %{build_timestamp} %{packager} %{version}-%{release}
- rebuild with option(s): %{?_with_krb5:KRB5 }%{?_with_ldap:LDAP }%{?_with_pam:PAM }%{?_with_ssl:SSL}

* %{factorydate} Stefan Ritt <stefan.ritt@psi.ch> %{version}-%{release}
- Updated from git 
* Wed Sep 26 2018 Stefan Ritt <stefan.ritt@psi.ch>
- Made adjustments for new elog server and RH7
* Fri Aug 29 2014 Stefan Ritt <stefan.ritt@psi.ch>
- Added BuildRequires, thanks to Stefan Roiser from CERN
* Fri Oct 21 2005 Stefan Ritt <stefan.ritt@psi.ch>
- Added resources/ directory
* Fri Mar 14 2003 Stefan Ritt <stefan.ritt@psi.ch>
- Added %post to change ownership of elog files
* Thu Jan 30 2003 Stefan Ritt <stefan.ritt@psi.ch>
- Added installation of man pages, thanks to Serge Droz <serge.droz@psi.ch>
* Tue Aug 13 2002 Stefan Ritt <stefan.ritt@psi.ch>
- Added elog group and user, thanks to Nicolas Chuche [nchuche@teaser.fr]
* Tue Jun 18 2002 Stefan Ritt <stefan.ritt@psi.ch>
- Put elogd.init into TAR file, add logbooks directory, put elogd in sbin/
* Tue Jun 18 2002 Serge Droz <serge.droz@psi.ch>
- Update to 2.0.0
* Mon Jun  3 2002 Serge Droz <serge.droz@psi.ch>
- Update to 1.3.6 
* Fri May 31 2002 Serge Droz <serge.droz@psi.ch>
- Initial RPM


%prep
%setup -q

%pre
%{_sbindir}/groupadd -r elog 2>/dev/null || :
%{_sbindir}/useradd -d / -s /bin/false \
   -g elog -M -r elog 2>/dev/null || :

%build
make %{?_with_ssl} %{?_with_pam} %{?_with_ldap} %{?_with_krb5} CFLAGS='-O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -g'
sed "s#\@PREFIX\@#%{prefix}#g" elogd.init_template > elogd.init

%install
make install ROOT=$RPM_BUILD_ROOT MANDIR=$RPM_BUILD_ROOT%{_mandir}

%post
chown -R elog:elog $RPM_BUILD_ROOT%{prefix}/elog

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root)
/etc/rc.d/init.d/elogd
%{_mandir}/man1/*
%{_mandir}/man8/*
%doc	README COPYING doc
%defattr(-,elog,elog)
%prefix/bin/*
%prefix/sbin/elogd
%prefix/elog/resources
%prefix/elog/ssl
%prefix/elog/themes
%prefix/elog/scripts
%prefix/elog/logbooks
%config(noreplace) %prefix/elog/elogd.cfg