DRS4 Forum
  DRS4 Discussion Forum  Not logged in ELOG logo
Entry  Mon Aug 31 16:44:12 2020, Hans Steiger, Channel Cascading 
    Reply  Mon Aug 31 17:17:30 2020, Stefan Ritt, Channel Cascading Screenshot_2020-08-31_at_16.52.28_.png
Message ID: 796     Entry time: Mon Aug 31 17:17:30 2020     In reply to: 795
Author: Stefan Ritt 
Subject: Channel Cascading 

If you have a board with cascading option, it should show the "combined" option in the 2048-bin option enabled (not grayed), as in the attached screen shot. If the 2048-bin option is all greyed out, the system does not recognize the cascading option. If your board has a sticker "2048 bin" and you still see the 2048-bin option greyed out, it might mean that a resistor on that board has been forgotten. If you do not see the "2048 bin" sticker on your board, you might not have a board with cascading option. So please check that. If the resistor is really missing, you can send us the board and we will add it.

Stefan

Hans Steiger wrote:

Dear All,

I have a board with Channel Cascading Option. I have the problem, that it seems to be impossible to run all 4 Channels simultaneously for digitizing pulses. I can just run even or odd channels but not even and odd ones? If I run in combined option, My question: If a board comes with this combined option, is it still usable as a 4Ch Digitizer but with 1024bin traces?

 

All the best,

 

Hans

 

Attachment 1: Screenshot_2020-08-31_at_16.52.28_.png  1.089 MB  Uploaded Mon Aug 31 18:18:08 2020  | Hide | Hide all
Screenshot_2020-08-31_at_16.52.28_.png
ELOG V3.1.5-fe60aaf