DRS4 Forum
  DRS4 Discussion Forum, Page 38 of 44  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Author Subjectup Text Attachments
  777   Mon Oct 14 12:56:13 2019 Stefan Ritthow to acquire the stop position with channel cascadingNote that you have to read out the Write
Shift Register only if you do channel cascading,
e.g. configuring the chip with 4x2048 bins
  
  778   Mon Oct 14 13:44:26 2019 Danyanghow to acquire the stop position with channel cascadingYes, firstly I configured the chip
with 4x2048 bins by setting the Write Shift
Register to 01010101b, A3-A0
  
  779   Mon Oct 14 15:27:09 2019 Stefan Ritthow to acquire the stop position with channel cascadingIf you configure the Write Shift Register
with 01010101b, then all you have to do after
a trigger is to set A3-A0 to 1101. The WSROUT
  
  780   Tue Oct 15 08:14:17 2019 Danyanghow to acquire the stop position with channel cascadingThanks a lot. The problem is solved when
A3-A0 is set 1101 and srclk keeps low.

Best Regards,
  
  112   Sat Feb 19 17:25:29 2011 S S Upadhyahow to synchronize Sampling frequency of two evaluation boards Dear sir,
We have two evaluation boards of
DRS4. We would like to use 8 inputs to be
  
  113   Sat Feb 19 22:46:35 2011 Stefan Ritthow to synchronize Sampling frequency of two evaluation boards

    

       
            
  
  114   Mon Feb 21 08:10:31 2011 Stefan Ritthow to synchronize Sampling frequency of two evaluation boards

    

       
            
  
  115   Mon Feb 21 12:42:33 2011 S S Upadhyahow to synchronize Sampling frequency of two evaluation boards

    

       
            
  
  533   Mon Aug 29 09:36:34 2016 benjamin legeytincrement write config register on the fly?Hello,

I have a question about using the
write config register to enable/disable sampling
  
  534   Mon Aug 29 10:57:33 2016 Stefan Rittincrement write config register on the fly?The issue with "stopping at cell 767"
would also affect this mode of operation.
Furthermore, the DRS4 chip has only 10 bit
  
  535   Mon Aug 29 12:18:49 2016 benjamin legeytincrement write config register on the fly?If I may trouble you for a little more
information, the critical point then is
that there should not be any zeroes in the
  
  536   Mon Aug 29 12:51:48 2016 Stefan Rittincrement write config register on the fly?The problem is when you change the write
config register from 11111111 to 01111111,
or from 00001111 to 00000111, then the last
  
  317   Fri Dec 13 10:37:18 2013 Dmitry Hitsinput protection in DRS4 evaluation board Dear Stefan
Last month I was using a DRS4 evaluation
board to digitise the signal from the charged
  
  318   Fri Dec 13 11:37:58 2013 Stefan Rittinput protection in DRS4 evaluation board

    

       
            
  
  837   Thu Oct 14 15:19:00 2021 Keita Mizukoshilivetime (or deadtime) of DRS4 evaluation boardDear experts,

 

I would like to use the DRS4 evaluation
  
  838   Thu Oct 14 15:25:07 2021 Stefan Rittlivetime (or deadtime) of DRS4 evaluation boardThe one thing you can do easily is to look
at the scaler values. If one channel counts
all physical events, and you have all read
  
  839   Thu Oct 14 18:03:52 2021 Keita Mizukoshilivetime (or deadtime) of DRS4 evaluation boardThank you very much for your response.
Excuse me for my very stupid confirmation.
If I take N events finally and the
  
  840   Thu Oct 14 18:42:31 2021 Stefan Rittlivetime (or deadtime) of DRS4 evaluation boardI would say not exactly, but it's a
good approximation.

  
  841   Fri Oct 15 06:15:53 2021 Keita Mizukoshilivetime (or deadtime) of DRS4 evaluation boardThank you very much.




  
  246   Tue May 21 12:39:00 2013 Enrico Contimac osx 10.6Hi,

I would like to use the DRS4 with my macbook
  
ELOG V3.1.4-bcd7b50