Hi John,

Thanks for the message! I’ve downloaded CKEditor version 4.22, since newer versions are no longer fully open source and come with restrictive licensing.  I now have the full CKEditor 4.22 package locally, but I’m not quite sure what the next step is. Should I place it somewhere specific in the ELOG directory structure or modify one of the templates to enable it? Any pointers on how to connect it properly to ELOG would be very helpful.

Hi John,

Thanks for the message! I’ve downloaded CKEditor version 4.22, since newer versions are no longer fully open source and come with restrictive licensing.  I now have the full CKEditor 4.22 package locally, but I’m not quite sure what the next step is. Should I place it somewhere specific in the ELOG directory structure or modify one of the templates to enable it? Any pointers on how to connect it properly to ELOG would be very helpful.

Best regards,
Pawel

Hi Pawel, I *think* we (you) need the 'ckeditor' program installed on your system for it to work. I am

Hi all,

I'm experiencing an issue on Kubuntu 24.04 where the WYSIWYG editor (in HTML mode) doesn't appear at all. This happens across multiple browsers (tested with Firefox and Chromium). The editor area is simply blank, without any visible toolbar or editable content area.

Has anyone encountered this on Kubuntu or found a workaround? Any tips would be appreciated!

Thanks in advance,
Pawel

Please excuse my double-posting. But my first entry was not displayed on the forum and I haven't received feedback yet. I think this is because I responded to an entry that was still in draft mode, whereas my entry was a "normal" entry. My initial entry has the Message ID: 69870 and was in reply to: 68348

***

Dear Andreas and Stefan,

First of all thank you for the template for a checklist. I have created my own version of it and the HTML looks fine. For comparison, I temporarily also included the shiftcheck template provided by Stefan to my ELOG.

However, I have the same problem as JD. After submitting the data in shiftcheck, I receive the error "Cannot open file passwords.pwd: No such file or directory" and the URL is http://localhost:8085/ShiftCheck/?cmd=Submit&suppress=1&unm=&upwd=&Author=Marcel+Zauner-Wieczorek&edit_id=&D=1&M=4&Shift=Morning&a4=&h2=&a5=&a6=&c1=&c2=&c3=&c4=&c5=&bb1=&cr1=&cr9=&cr18=&cr20=&cr21=&cr23=&cr24="

I have tried to include the path of the password file in the cfg file (using "", <>, <"">, and only the path name), but then the elogd.exe won't start at all unless I change it back to the simple "Password file = passwords.pwd".

Here is an excerpt of my config file:

    ****

    [global]
    port = 8085
     

    Password file = passwords.pwd
    Login expiration = 1
    Admin user = Marcel
    Login user = Marcel

    Self register = 1

    Group General = ShiftCheck
    Group Gas phase instruments = Checklist_MARGA

    Restrict edit time = 1
    Admin restrict edit time = 0
    Autosave = 60

    [ShiftCheck]
    Comment = Shift Check List

    Attributes = Author, D, M, Y, Shift, a1, a2, a3, a4, a5, h1, h2, h3, h4, h5, c1, c2, c3, c4, c5, c6, c7, bb1, cr1, cr2, cr3, cr4, cr5, cr6, cr7, cr8, cr9, cr10, cr11, cr12, cr13, cr14, cr15, cr16, cr17, cr18, cr19, cr20, cr21, cr22, cr23, cr24, cr25, cr26, sw1, sw2, sw3, sw4, sw5
    Quick filter = Shift, Author
    Options Shift = Morning, Evening, Night

    Enable attachments = 0
    Show text = 0
    Custom new form = shiftcheck.html
    Custom edit form = shiftcheck.html
    Custom display form = shiftcheck.html
    List after submit = 1

    [Checklist_MARGA]
    Comment = Check List for MARGA

    Date Format = %d.%m.%Y
    Time Format = %d.%m.%Y %H:%M:%S

    Reverse sort = 1

    Attributes = Author, D, M, Y, On, DP2h, T_SJAC, T_heat, EC_An, EC_Cat, IonBal, IS_Cat_Ae, IS_An_Ae, IS_Cat_Ga, IS_An_Ga, P1, P2, Err, Com

    Quick filter = Author

    Enable attachments = 0
    Show text = 0
    Custom new form = checklist_MARGA.html
    Custom edit form = checklist_MARGA.html
    Custom display form = checklist_MARGA.html
    List after submit = 1
    ***

I am actually confused about the passwords.pwd file. I have successfully created several users with passwords and I can use their credentials to log into the different labbooks. However, none of these users (let along their (encrypted) passwords) turn up in the passwords.pwd file. I don't know where ELOG saves these information, but it's apparently not the passwords.pwd file that is defined in the cfg file and that I have access to.

I hope that someone can help me with this issue. Otherwise, I would omit the password function within ELOG and find an external solution for a password protection.

Cheers,

Marcel

I stopped making tar files, since most people building elog from sources just pull it from the bitbucket repository:

$ git clone https://bitbucket.org/ritt/elog --recursive
$ cd elog
$ mkdir build; cd build;
$ cmake ..; make

So this never made it into the download area ?  elog-latest.tar is elog-3.1.5-1 and contains no files from 2024 or 2025 .

Thanks
 

Hello. We are using explicity subdir names on our elog server to manage a large number of "Top groups" and sub "groups". When we create a new logbook from a template in the same group, it would be beneficial to automatically give a new subdir based on the previous one. At the very least, it should not reuse the same parameter as the template (see below).

At the moment, it copies the subdir parameter from the template logbook, which results in the new logbook writing to the same location as the template. That is very confusing and has the potential to be harmful as people can (and recently did) decide to delete these "duplicate" entries. But they are not duplicates, they are the exact same entries as the template logbook and deleting them removes them forever!

The way around this at the moment is to manually update the subdir after copying, but then the logbooks need to be re-indexed before the new logbook will display correctly. That requires a manual restart of the elogd process, which is less than ideal.