Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
icon4.gif   elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 23 14:06:36 2019 
    icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Tue Apr 23 14:26:51 2019 
       icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu Apr 25 11:16:06 2019 
          icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Thu Apr 25 11:27:21 2019 
             icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 30 12:47:46 2019 
                icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 30 14:07:52 2019 
                   icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Wed May 1 10:59:59 2019 
                      icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu May 2 09:47:41 2019 
Message ID: 68942     Entry time: Thu Apr 25 11:16:06 2019     In reply to: 68933     Reply to this: 68943
Icon: Reply  Author: Alessio Sarti  Author Email: alessio.sarti@uniroma1.it 
Category: Bug report  OS: Mac OSX  ELOG Version: 3.1.4 
Subject: Re: elogd Service exited with abnormal code: 1 

Thanks for the prompt feedback.

a) I confirm that the problems shows up also when running interactively the elog through  elogd -p 8080

b) I am trying to catch the exit using lldb on the mac machine. I will be able to give you some feedback on that I hope in the next week (not easy access to the server)

c) What is the clean - recommended way to port everything on the linux machine and debug? I would do the following: download/install elog on a linux server, 'copy' all that now lives under /usr/local/elog on the mac one on the linux server, start the elog... is this ok? or there's anything else that I need to copy from the mac server to be sure to have the same environment?

Thanks again.

Alessio

 

Stefan Ritt wrote:

This kind of behavior we typically see if some elog entry is corrupt. After a few hours you might access this corrupt entry by accident, and then the server stops. If you see however this behavior on a fresh logbook with no corrupt entries, then the problem must lie somewhere else.

Do you see the same problem running under linux?

Do you see the same problem if you run elogd interactively (not through launchd)?

If you run elogd inside a debugger (like gdb or lldb), what does the debugger tell you when it crashes and you show the stack frames? Make sure to compile with -O0 and -g flags to include debug information in the executable.

Stefan 

Alessio Sarti wrote:

Dear all.

I am running elog 

elogd 3.1.4 , revision ead6bbc6

on Macosx Mojave

Darwin arpg-serv.ing2.uniroma1.it 18.5.0 Darwin Kernel Version 18.5.0: Mon Mar 11 20:40:32 PDT 2019; root:xnu-4903.251.3~3/RELEASE_X86_64 x86_64

I managed to compile and run without problems the elog source code.

I can run it and have it properly displayed at boot time. After the server boot, for few hours, I have the elog ready at http://arpg-serv.ing2.uniroma1.it/elog  but then, after few hours.. I get that the service stops and the elog is no longer accessible.

So far I was able to track down the problems only to the 

/var/log/system.log

file in which I find a not useful error message:

Eg: Apr 23 14:00:46 arpg-serv com.apple.xpc.launchd[1] (ch.psi.elogd[85248]): Service exited with abnormal code: 1

I do not know I can I debug this nor why the code runs for few hours without problems... I just re-downloaded the code from scratch today, unloaded and then re-loaded the daemon but still it fails with the same error.

I am sure that I can get it running again for few hours by re-booting. But I want to understand the source of the problem.. Anyone can be of help on this long standing issue?

Thanks

 

 

ELOG V3.1.5-fe60aaf