Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
icon4.gif   elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 23 14:06:36 2019 
    icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Tue Apr 23 14:26:51 2019 
       icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu Apr 25 11:16:06 2019 
          icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Thu Apr 25 11:27:21 2019 
             icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 30 12:47:46 2019 
                icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Tue Apr 30 14:07:52 2019 
                   icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Stefan Ritt on Wed May 1 10:59:59 2019 
                      icon2.gif   Re: elogd Service exited with abnormal code: 1, posted by Alessio Sarti on Thu May 2 09:47:41 2019 
Message ID: 68959     Entry time: Thu May 2 09:47:41 2019     In reply to: 68955
Icon: Reply  Author: Alessio Sarti  Author Email: alessio.sarti@uniroma1.it 
Category: Bug report  OS: Mac OSX  ELOG Version: 3.1.4 
Subject: Re: elogd Service exited with abnormal code: 1 

Thanks a lot for providing a quick fix!

The elog is now happily running since two days without problems :)

I will get back to you in case anything else shows up.

Thanks a lot again.

Stefan Ritt wrote:

Ok, that helped. It looks to me that the strlcpy() function from MacOSC does not like overlapping stings as parameters. Funny that this does not happen on my Mac (Mojave 10.14.4). I fixed the two cases you reported (lines 18712 and 19021) and committed the changes to bitbucket, from where you can pull and test it again (see https://elog.psi.ch/elog/download.html for instructions). If it happens again, please report the line number in elogd.c like here (where it is 19021:7):

frame #8: 0x000000010006a7ac elogd`build_ref(ref="page6?&sort=Subject", size=256, mode="full", expand="", attach="", new_entries="") at elogd.c:19021:7

Good luck!

Stefan

 

ELOG V3.1.5-3fb85fa6