Hello Andres
Or maybe my reply was unclear :-), but i did use the "Show Attributes Edit" the way you meant to not show attribute BRUGER and when i do that i get:
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied.
Please go back and enter the Bruger field.
If I save instead of submitting it looks like it does change the attribute as intented in my test Elog system. Unfortunately i've disabled save with "Save drafts = 0" in my live system - to only use submit, and enabling drafts only causes other issues. My configuration is attached
Kind Regards Finn
| Andreas Luedeke wrote: |
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not Locked.
I haven't tried, but I guess that should work.
Cheers
Andreas
| Finn Junker wrote: |
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked Attributes = Bruger".
If one or more of the attributes are locked i get the error "Error: Attribute option - keep original values - not existing". I'm not trying to change the locked attribute, but it seems when one is locked multiple editing is not possible.
Is that intended to work this way?
Kind Regards Finn
| Andreas Luedeke wrote: |
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix.
Cheers, Andreas
| Finn Junker wrote: |
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish translation "igangværende" and "afsluttet", see the attached pictures.
When I select multiple post and want to edit them to status "afsluttet" i get the "udklip_2.jpg" entry form and change only the status to "afsluttet" (Finished)
The result is a error informing that the attribut "gem oprindelige værdier" does not exist. As a test i changed the text in the translation file from "Keep origianl values = gem oprindelige værdier" to "Keep origianl values = Keep origianl values" but the result is the same error: Attribut Keep original values does not exist.
Is there a solution to this or is or is mutiple editing of post not allowed?
Kind Regards Finn
|
|
|
|
|
|
|