Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG  Not logged in ELOG logo
icon5.gif   From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 15:08:17 2020 
    icon2.gif   Re: From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 17:50:50 2020 
       icon2.gif   Re: From command line: "command Submit not allowed", posted by Stefan Ritt on Tue Oct 20 18:02:42 2020 
          icon2.gif   Re: From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 18:26:26 2020 
             icon2.gif   Re: From command line: "command Submit not allowed", posted by Stefan Ritt on Tue Oct 20 18:40:05 2020 
             icon2.gif   Re: From command line: "command Submit not allowed", posted by David Wallis on Tue Oct 20 20:44:03 2020 
                icon2.gif   Re: From command line: "command Submit not allowed", posted by David Dunne on Wed Oct 21 03:08:21 2020 
                   icon2.gif   Re: From command line: "command Submit not allowed", posted by David Wallis on Wed Oct 21 15:14:13 2020 
Message ID: 69239     Entry time: Tue Oct 20 17:50:50 2020     In reply to: 69237     Reply to this: 69240
Icon: Reply  Author: David Wallis  Author Email: wallis@aps.anl.gov 
Category: Question  OS: Linux  ELOG Version: ELOG V3.1.4-ba8 
Subject: Re: From command line: "command Submit not allowed" 

Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.

David Wallis wrote:

I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

 

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"

 

ELOG V3.1.5-fe60aaf