ELOG

Hmmm... I added "New" to the Guest menu list, and the button showed up for a guest user. But when I submitted the new ticket, I got the message Error: Command "Submit" is not allowed for user ""

Stefan Ritt wrote:

"submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.

Stefan

David Wallis wrote:

Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.

David Wallis wrote:

I'm running Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****' "This is a test message"

ELOG V3.1.5-3fb85fa6