Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 12 of 238  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
icon5.gif   UNC Pfade, posted by Michael on Wed Oct 19 13:52:24 2022 

Hallo,

gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?

\\server\freigabe\...

Der Freigabepfad wird leider immer unter C:\... angelegt

Vielen Dank

    icon2.gif   Re: UNC Pfade, posted by Stefan Ritt on Wed Oct 19 14:08:15 2022 

UNCs are not officially supported by elog, but your operating system might map them if you're lucky, just try. It is however not recommended to do so, since network drives can sometimes be slow during network congestion and the response of elog will then suffer.

Stefan

Michael wrote:

Hallo,

gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?

\\server\freigabe\...

Der Freigabepfad wird leider immer unter C:\... angelegt

Vielen Dank

 

       icon2.gif   Re: UNC Pfade, posted by Michael on Thu Oct 20 07:53:31 2022 

So there is no way to save the file on the network?! :(

Can i install the elog on a windows server? i tried it yesterday, but i think i missed something, couse i only could open the elog on the server and not with a client pc.

Stefan Ritt wrote:

UNCs are not officially supported by elog, but your operating system might map them if you're lucky, just try. It is however not recommended to do so, since network drives can sometimes be slow during network congestion and the response of elog will then suffer.

Stefan

Michael wrote:

Hallo,

gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?

\\server\freigabe\...

Der Freigabepfad wird leider immer unter C:\... angelegt

Vielen Dank

 

 

          icon2.gif   Re: UNC Pfade, posted by Antonio Bulgheroni on Thu Oct 20 08:37:23 2022 

I'm running ELOG on a windows server 2016. Just installed the windows installer and worked out of the box. 

Have you checked the firewall?

Michael wrote:

So there is no way to save the file on the network?! :(

Can i install the elog on a windows server? i tried it yesterday, but i think i missed something, couse i only could open the elog on the server and not with a client pc.

Stefan Ritt wrote:

UNCs are not officially supported by elog, but your operating system might map them if you're lucky, just try. It is however not recommended to do so, since network drives can sometimes be slow during network congestion and the response of elog will then suffer.

Stefan

Michael wrote:

Hallo,

gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?

\\server\freigabe\...

Der Freigabepfad wird leider immer unter C:\... angelegt

Vielen Dank

 

 

 

icon5.gif   Duplicating attachments when editing an entry via command line elog.exe, posted by Antonio Bulgheroni on Wed Oct 19 14:19:39 2022 

Hi there! 

I have noticed this effect when editing entries with the command line elog.exe.

Let's say I submit a new entry via the command line and I'm also submitting an attachment file. If I check the elog entry via the browser I see my entry there with its attachment as expected. The attachment is also present on the server in the logbook folder with the date and time stamp in front of the original name. 

Now, let's say I would like to edit the same entry via the command line, if I don't pass the attachment, the edited entry won't show any attachment in the browser but on the server there is still the old attachment file available. 

A similar situation is when I edit an entry and I want the edited entry to have the same attachment file of the original one. In that case, the entry on the browser will show the attachment, but on the server I have two copies of the attachment file with the two timestamps (original submission and edited submission). Moreover the first copy is unreachable from any client because not linked to any entry anymore.

In general I would not care much, but I have an application that is regularly updating entries and I will soon have the server hard disk full of useless copies of unlinked attachment. 

I have seen that when deleting an entry, also all its attachments are removed. Would it be possible to have attachments removed when editing an entries? 

Thanks for your help! 

Cheers,

toto

 

icon8.gif   Anyone else running elogd on redhat ES 8 having random crashes?, posted by mathew goebel on Tue Oct 4 20:43:28 2022 

For the last couple of months we are getting a random elogd crash once in a while we are getting something like the following in the middle of the night

> Sep 29 20:45:07 elog kernel: server_name686835]: segfault at 7ffd7f5a0000 ip 00007fceaeabbf06 sp 00007ffd7f577348 error 6 in libc-2.28.so[7fceaea8a000+1bc000]

I'm going to try and see if it will leave a coredump file, just thought I would ask if anyone else had seen this before?

Thanks,
Matt

 

 

 

    icon2.gif   Re: Anyone else running elogd on redhat ES 8 having random crashes?, posted by Stefan Ritt on Wed Oct 5 08:21:12 2022 

Most likely these are some currupt logbook files. If you get a coredump (or stack trace) you can maybe figure out which file it was. These are plain ASCII files (YYMMDDa.log) and you can see with an editor if someting there is not in order.

Stefan

mathew goebel wrote:

For the last couple of months we are getting a random elogd crash once in a while we are getting something like the following in the middle of the night

> Sep 29 20:45:07 elog kernel: server_name686835]: segfault at 7ffd7f5a0000 ip 00007fceaeabbf06 sp 00007ffd7f577348 error 6 in libc-2.28.so[7fceaea8a000+1bc000]

I'm going to try and see if it will leave a coredump file, just thought I would ask if anyone else had seen this before?

Thanks,
Matt

 

 

 

 

       icon2.gif   Re: Anyone else running elogd on redhat ES 8 having random crashes?, posted by mathew goebel on Wed Oct 5 20:39:16 2022 

Thanks for the info! 

Stefan Ritt wrote:

Most likely these are some currupt logbook files. If you get a coredump (or stack trace) you can maybe figure out which file it was. These are plain ASCII files (YYMMDDa.log) and you can see with an editor if someting there is not in order.

Stefan

mathew goebel wrote:

For the last couple of months we are getting a random elogd crash once in a while we are getting something like the following in the middle of the night

> Sep 29 20:45:07 elog kernel: server_name686835]: segfault at 7ffd7f5a0000 ip 00007fceaeabbf06 sp 00007ffd7f577348 error 6 in libc-2.28.so[7fceaea8a000+1bc000]

I'm going to try and see if it will leave a coredump file, just thought I would ask if anyone else had seen this before?

Thanks,
Matt

 

 

 

 

 

icon3.gif   Finden Sie das beste Herrenhemd für den Büroalltag bei https://brandmarkt.ch/ in St. Gallen, posted by Brandmarkt on Thu Sep 29 08:52:05 2022 

Herrenhemden in St. Gallen
Titel: Finden Sie das beste Herrenhemd für den Büroalltag bei brandmarkt in St. Gallen
Wenn es darum geht, sich für die Arbeit zu kleiden, ist es am besten, eine Vielzahl von zuverlässigen Büromodellen zur Verfügung zu haben. Von allen Kleidungsstücken, die zur Auswahl stehen, sind Herrenhemden für das Büro das attraktivste Kleidungsstück für Berufstätige.
Berufstätige Männer wollen immer gut in ihre Bürokleidung investieren. Die günstigste Herren-Business-Kleidung zu kaufen, ist sehr schwierig.
Möchten Sie die originellen und stilvollen Herrenhemden für die Bürobekleidung in St. Gallen kaufen?
 Bei 9000 in St. Gallen hat Brandmarkt eine Vielzahl von Herrenhemden für die Bürobekleidung. Langärmelige Herrenhemden für den Arbeitsplatz, kurzärmelige Herrenhemden in aktuellen Modetrends sind zu günstigen Preisen erhältlich.
Berufstätige Männer wollen immer stilvoll und bequem aussehen, indem sie leichte Kleidung wie T-Shirts oder kurzärmelige Herren-Arbeitshemden tragen. Sie können ein kurzärmeliges T-Shirt mit einer Jeans oder einer Hose tragen und sind damit bei einem Meeting präsentabel.
Kleiden Sie sich im Sommer mit der bequemsten und stilvollsten Herren-Bürokleidung für das Büro. Herrenhemden für das Büro in hellen Farben sind die perfekte Kleidung für den Sommer. Herrenhemden für den Sommerlook gibt es bei Brandmarkt zu günstigen Preisen.  
Geschäftsleute wollen immer Klasse in ihrem Auftreten mit der aktuellsten Herren-Business-Mode. Meistens werden für die Bürokleidung der Herren Anzüge getragen. Passende Hemden zum Anzug sorgen für Abwechslung im Erscheinungsbild.
 
Bei Brandmarkt in St. Gallen können Sie Marken-Herrenhemden in verschiedenen Farben, Mustern und Designs zu günstigen Preisen kaufen und mit Ihrem Büroanzug kombinieren.
Viele Büros planen verschiedene Tage wie den "Causal Wear Friday" für ihre Mitarbeiter. Es ist Zeit, sich in Freizeitkleidung zu kleiden. Sie können ein Hemd oder T-Shirt mit Jeans tragen. Passende Herren-Accessoires wie Gürtel und Krawatten können Ihren Look ebenfalls aufwerten.
Holen Sie sich die exklusiven Herrenhemden bei Brandmarkt zu den günstigsten Preisen. Sie können die Top-Marken wie Ice Peak bei Brandmarkt, Jako bei Brandmarkt, Tom Taylor bei Brandmarkt, Puma bei Brandmarkt, Nike bei Brandmarkt und viele andere zu einem sehr günstigen Preis bei Brandmarkt in St. Gallen kaufen.
Nicht nur die Hemdenkollektion, sondern auch Herrenschuhe und Herrenaccessoires können Sie bei Brandmarkt in St. Gallen zu sehr günstigen Preisen kaufen.
Unternehmen veranstalten für ihre Mitarbeiter meist Sportveranstaltungen. Es ist an der Zeit, dass die Angestellten ein anderes Outfit als den Dresscode des Büros tragen. Herren-Sportbekleidung Hemden sind die beste Option für Sportveranstaltungen.
Jetzt können Sie sich für das Büro anders stylen als mit einem Anzug, einem Hemd oder einem T-Shirt. Tragen Sie ein schmal geschnittenes, langärmeliges Herren-Sporthemd mit Jogginghose und machen Sie bei Sportveranstaltungen im Büro eine gute Figur.
Für informelle Tage wünscht sich jeder Mitarbeiter einen besonderen Look. Wenn Sie auf der Suche nach Sportbekleidung, Herrenhemden in Slim Fit, Regular Fit, Herren Outdoor Hemden sind. Holen Sie sich diese im Brandmarkt in St. Gallen.
Dort gibt es exklusive Marken von Herren Sporthemden in St. Gallen zu sehr günstigen Preisen. Zu günstigen Preisen, nicht nur das Herren Sporthemd sondern auch die Marken Herren Sportschuhe zu Ihrem Outfit.
 
Wo kann man in St. Gallen günstige Herren-Bürohemden zu günstigen Preisen kaufen?
Unser Modehaus Brandmarkt an der 9000 in St. Gallen hat originelle und hochwertige Herrenhemden in St. Gallen, darunter eine große Auswahl an langärmeligen Herren-Arbeitshemden, kurzärmeligen Herren-Arbeitshemden, Slim-Fit-Hemden und Sporthemden, alles zu sehr günstigen Preisen.
 
Worauf warten Sie noch? Kommen Sie zu Brandmarkt in St. Gallen und kaufen Sie die beste Qualität an Herrenhemden in St. Gallen für Ihre Bürokleidung zu Einzelhandelspreisen. Sparen Sie Ihr Geld und sehen Sie professionell aus.

icon1.gif   Need help with permission, posted by Dan Witteman on Fri Sep 23 01:32:15 2022 

Hello,

I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries.

When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or edit anything.

Attempting to post throws the error:

New entry cannot be written to directory "/usr/local/elog/logbooks/demo/"

Please check that it exists and elogd has write access and disk is not full.

 

 

Please point me in the right direction to correctly set permissions and create aditional log books.

 

Thanks,

Dan

    icon2.gif   Re: Need help with permission, posted by Mikkel D. Lund on Mon Sep 26 12:21:52 2022 

Hi all,

I have the same problem on Ubuntu 22.04. I have compiled from the latest tarball and copied all our logbooks from our old Ubuntu 18.04 server to a new Ubuntu 22.04. The logbooks does however not appear when I log in, so I assume ELOG doesn't have read access either?
Any hints on how to set the permissions correctly would be greatly appreciated.

Thanks,
Mikkel

Dan Witteman wrote:

Hello,

I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries.

When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or edit anything.

Attempting to post throws the error:

New entry cannot be written to directory "/usr/local/elog/logbooks/demo/"

Please check that it exists and elogd has write access and disk is not full.

 

 

Please point me in the right direction to correctly set permissions and create aditional log books.

 

Thanks,

Dan

 

       icon2.gif   Re: Need help with permission, posted by Stefan Ritt on Mon Sep 26 12:38:29 2022 

Permissions are handled by the operating system and have nothing to do with elog. Make sure you run elog under an account which has write access to the desired directories. Consult Ubuntu documentation how to do that. Sometimes it's helpful to start elog interactively with the -v flag to see some verbose output. Maybe you can spot something there.

Stefan

Mikkel D. Lund wrote:

Hi all,

I have the same problem on Ubuntu 22.04. I have compiled from the latest tarball and copied all our logbooks from our old Ubuntu 18.04 server to a new Ubuntu 22.04. The logbooks does however not appear when I log in, so I assume ELOG doesn't have read access either?
Any hints on how to set the permissions correctly would be greatly appreciated.

Thanks,
Mikkel

Dan Witteman wrote:

Hello,

I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries.

When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or edit anything.

Attempting to post throws the error:

New entry cannot be written to directory "/usr/local/elog/logbooks/demo/"

Please check that it exists and elogd has write access and disk is not full.

 

 

Please point me in the right direction to correctly set permissions and create aditional log books.

 

Thanks,

Dan

 

 

          icon2.gif   Re: Need help with permission, posted by Stefan Ritt on Mon Sep 26 12:45:50 2022 

Sometimes this can also be an SELinux issue, if you have that service running. Try "journalctl | grep denied" to see denied resources and consult the SELinux documentation on how to fix that.

Stefan Ritt wrote:

Permissions are handled by the operating system and have nothing to do with elog. Make sure you run elog under an account which has write access to the desired directories. Consult Ubuntu documentation how to do that. Sometimes it's helpful to start elog interactively with the -v flag to see some verbose output. Maybe you can spot something there.

Stefan

Mikkel D. Lund wrote:

Hi all,

I have the same problem on Ubuntu 22.04. I have compiled from the latest tarball and copied all our logbooks from our old Ubuntu 18.04 server to a new Ubuntu 22.04. The logbooks does however not appear when I log in, so I assume ELOG doesn't have read access either?
Any hints on how to set the permissions correctly would be greatly appreciated.

Thanks,
Mikkel

Dan Witteman wrote:

Hello,

I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries.

When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or edit anything.

Attempting to post throws the error:

New entry cannot be written to directory "/usr/local/elog/logbooks/demo/"

Please check that it exists and elogd has write access and disk is not full.

 

 

Please point me in the right direction to correctly set permissions and create aditional log books.

 

Thanks,

Dan

 

 

 

             icon2.gif   Re: Need help with permission, posted by Dan Witteman on Mon Sep 26 19:21:33 2022 

I used "chown" to pass permissions from root to my deafult user, then restarted the service and now I can make posts. Thank you!

Stefan Ritt wrote:

Sometimes this can also be an SELinux issue, if you have that service running. Try "journalctl | grep denied" to see denied resources and consult the SELinux documentation on how to fix that.

Stefan Ritt wrote:

Permissions are handled by the operating system and have nothing to do with elog. Make sure you run elog under an account which has write access to the desired directories. Consult Ubuntu documentation how to do that. Sometimes it's helpful to start elog interactively with the -v flag to see some verbose output. Maybe you can spot something there.

Stefan

Mikkel D. Lund wrote:

Hi all,

I have the same problem on Ubuntu 22.04. I have compiled from the latest tarball and copied all our logbooks from our old Ubuntu 18.04 server to a new Ubuntu 22.04. The logbooks does however not appear when I log in, so I assume ELOG doesn't have read access either?
Any hints on how to set the permissions correctly would be greatly appreciated.

Thanks,
Mikkel

Dan Witteman wrote:

Hello,

I have just installed elog onto an ubuntu focal server using <sudo make install> and I am unable to create new entries.

When I access the log via a windows PC connected to the local network, I can see the demo logbook with the 1 test post, but I cannot create or edit anything.

Attempting to post throws the error:

New entry cannot be written to directory "/usr/local/elog/logbooks/demo/"

Please check that it exists and elogd has write access and disk is not full.

 

 

Please point me in the right direction to correctly set permissions and create aditional log books.

 

Thanks,

Dan

 

 

 

 

Entry   Change timestamp button from UTC, posted by Hawkins Clay on Tue Sep 20 22:31:29 2022 
 
Entry   Elog with out SMTP, posted by Paul Paquette on Fri Sep 9 20:01:15 2022 
 
icon5.gif   By Passing the Email requirements for Elog, posted by Paul Paquette on Fri Sep 9 19:42:05 2022 

Hello Sir,

        I'v been a long time user fo Elog for about 14 years.  We use it for indexing our Zoning Board of Adjustment Meeting Minutes for Decision on Properties within the Town of Hampton.  Is it possibel to by-pass the SMTP mailer for building logins and password changes.   We are a small network where we deal wiht the customer face to face in reseting password and builing new users.  Having the user reset them selves doesn't happen and normally we just take a ticket and do the task for them. 

 

We are building a new user and take we have not done in 10 years.  In those ten years the decsion was made to The Town onto Office 365 E3 GCC  and remove the ole mail server.  Now I'm finding impossible to build a new user or reset a password without SMTP support.

Thank you in advance.

 

 

ELOG V3.1.5-3fb85fa6