Re: Email boolean , posted by Andreas Luedeke on Wed Oct 9 12:39:45 2019
|
> > Hello Elog forum
> >
> > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
|
Re: Email boolean , posted by Finn Junker on Thu Oct 10 09:27:42 2019
|
> > > Hello Elog forum
> > >
> > > Is it possible to email boolean statements, like if a checkbox is checked to email certain people?
|
Edit of multiple posts, posted by Finn Junker on Fri Oct 11 14:16:58 2019 
|
Hello Elog Forum
There is i ELOG the function to edit multiple posts eg. to change the staus from "ongoing" to "finished" -> in danish
translation "igangværende" and "afsluttet", see the attached pictures. |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Tue Oct 15 10:37:29 2019
|
I use editing of multiple entries frequently and it works fine for me.
To understand your problem I would suggest that you try a minimal configuration. If you have a test logbook with just one or two fields and it
still does not work, then post the config here that people can reproduce your problem - and hopefully find a fix. |
|
Re: Edit of multiple posts, posted by Finn Junker on Thu Oct 17 14:57:25 2019
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked
Attributes = Bruger". |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show
Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not |
|
Re: Edit of multiple posts, posted by Finn Junker on Fri Oct 18 09:40:54 2019
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied. |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 23:22:50 2019
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It
is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers,
Andreas
Finn |