Re: TCK-##### stopped Working, posted by Don Perrea on Mon Jul 14 17:19:13 2008
|
Don Perrea wrote: |
We have been successfully using the TCK-##### for several months and suddenly today it has stopped incrementing. We were at ticket # 40 and this morning any new tickets come up as 12 and never increment? We have tried restarting the elog service. Any suggestions would be appreciated.
Thank You
Don
|
My apologies for posting this question. I have found the solution.
We had two log books each with the same variable called "Ticket" but different values. When an entry from one was Moved to the other the counter was confused. I had to manually change the value of "Ticket" to match the convention of the log book that the entry was now in.
Thanks
|
Elog crashing with "segfault" during file upload, posted by Jesse Wodin on Thu Jul 17 01:16:49 2008
|
Hi there, I just compiled and installed elog on a machine running the newest Ubuntu server. Everything went fine - no problems. Running elog on it's own (no apache). I moved over a bunch of logbooks from an older elog, which seemed to work. Now, elog seems to crash when people are uploading files. Here is a snip from my syslog, and you can see each time it crashes with "error 4."
Jul 16 14:02:45 GrattaLab3old elogd[4526]: elogd 2.7.4 built Jul 15 2008, 18:44:44
Jul 16 14:02:45 GrattaLab3old elogd[4526]: revision 2111
Jul 16 14:02:45 GrattaLab3old elogd[4526]: FCKedit detected
Jul 16 14:02:45 GrattaLab3old elogd[4526]: ImageMagick detected
Jul 16 14:02:45 GrattaLab3old elogd[4526]: Server listening on port 8080 ...
Jul 16 16:02:42 GrattaLab3old kernel: [10631.276626] elogd[4526]: segfault at b4466000 eip 080adf19 esp bfa281d0 error 4
Jul 16 16:05:24 GrattaLab3old elogd[5509]: elogd 2.7.4 built Jul 15 2008, 18:44:44
Jul 16 16:05:24 GrattaLab3old elogd[5509]: revision 2111
Jul 16 16:05:24 GrattaLab3old elogd[5509]: FCKedit detected
Jul 16 16:05:24 GrattaLab3old elogd[5509]: ImageMagick detected
Jul 16 16:05:35 GrattaLab3old elogd[5509]: Server listening on port 8080 ...
Jul 16 16:06:06 GrattaLab3old kernel: [10834.637427] elogd[5509]: segfault at 091d7000 eip 080adf19 esp bfc313f0 error 4
Jul 16 16:07:10 GrattaLab3old elogd[5517]: elogd 2.7.4 built Jul 15 2008, 18:44:44
Jul 16 16:07:10 GrattaLab3old elogd[5517]: revision 2111
Jul 16 16:07:10 GrattaLab3old elogd[5517]: FCKedit detected
Jul 16 16:07:10 GrattaLab3old elogd[5517]: ImageMagick detected
Jul 16 16:07:10 GrattaLab3old elogd[5517]: Server listening on port 8080 ...
Jul 16 16:07:49 GrattaLab3old kernel: [10937.923301] elogd[5517]: segfault at b7c0d000 eip 080adf19 esp bffc1780 error 4
I run elog as:
Usr = elog
Grp = elog
/usr/local/sbin/elog -p 8080 -c /usr/local/elog/elogd_exo.cfg -D
where elogd_exo is my config file. Nothing special in my config file. |
Re: Elog crashing with "segfault" during file upload, posted by Jesse Wodin on Fri Jul 18 08:18:18 2008
|
Jesse Wodin wrote: |
Hi there, I just compiled and installed elog on a machine running the newest Ubuntu server. Everything went fine - no problems. Running elog on it's own (no apache). I moved over a bunch of logbooks from an older elog, which seemed to work. Now, elog seems to crash when people are uploading files. Here is a snip from my syslog, and you can see each time it crashes with "error 4."
Jul 16 14:02:45 GrattaLab3old elogd[4526]: elogd 2.7.4 built Jul 15 2008, 18:44:44
Jul 16 14:02:45 GrattaLab3old elogd[4526]: revision 2111
Jul 16 14:02:45 GrattaLab3old elogd[4526]: FCKedit detected
Jul 16 14:02:45 GrattaLab3old elogd[4526]: ImageMagick detected
Jul 16 14:02:45 GrattaLab3old elogd[4526]: Server listening on port 8080 ...
Jul 16 16:02:42 GrattaLab3old kernel: [10631.276626] elogd[4526]: segfault at b4466000 eip 080adf19 esp bfa281d0 error 4
Jul 16 16:05:24 GrattaLab3old elogd[5509]: elogd 2.7.4 built Jul 15 2008, 18:44:44
Jul 16 16:05:24 GrattaLab3old elogd[5509]: revision 2111
Jul 16 16:05:24 GrattaLab3old elogd[5509]: FCKedit detected
Jul 16 16:05:24 GrattaLab3old elogd[5509]: ImageMagick detected
Jul 16 16:05:35 GrattaLab3old elogd[5509]: Server listening on port 8080 ...
Jul 16 16:06:06 GrattaLab3old kernel: [10834.637427] elogd[5509]: segfault at 091d7000 eip 080adf19 esp bfc313f0 error 4
Jul 16 16:07:10 GrattaLab3old elogd[5517]: elogd 2.7.4 built Jul 15 2008, 18:44:44
Jul 16 16:07:10 GrattaLab3old elogd[5517]: revision 2111
Jul 16 16:07:10 GrattaLab3old elogd[5517]: FCKedit detected
Jul 16 16:07:10 GrattaLab3old elogd[5517]: ImageMagick detected
Jul 16 16:07:10 GrattaLab3old elogd[5517]: Server listening on port 8080 ...
Jul 16 16:07:49 GrattaLab3old kernel: [10937.923301] elogd[5517]: segfault at b7c0d000 eip 080adf19 esp bffc1780 error 4
I run elog as:
Usr = elog
Grp = elog
/usr/local/sbin/elog -p 8080 -c /usr/local/elog/elogd_exo.cfg -D
where elogd_exo is my config file. Nothing special in my config file.
|
Another funny problem. When I'm uploading a file, the syslog says this:
Jul 17 23:12:52 exo-elog elogd[4745]: Falling back to default group "elog"
Jul 17 23:12:52 exo-elog elogd[4745]: Falling back to default user "elog"
Jul 17 23:12:52 exo-elog elogd[4745]: Cannot restore original GID/UID.
Jul 17 23:12:52 exo-elog elogd[4745]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:12:52 exo-elog elogd[4749]: Falling back to default group "elog"
Jul 17 23:12:52 exo-elog elogd[4749]: Falling back to default user "elog"
Jul 17 23:12:52 exo-elog elogd[4749]: Cannot restore original GID/UID.
Jul 17 23:12:52 exo-elog elogd[4749]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:12:56 exo-elog elogd[4753]: Falling back to default group "elog"
Jul 17 23:12:56 exo-elog elogd[4753]: Falling back to default user "elog"
Jul 17 23:12:56 exo-elog elogd[4753]: Cannot restore original GID/UID.
Jul 17 23:12:56 exo-elog elogd[4753]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:12:56 exo-elog elogd[4757]: Falling back to default group "elog"
Jul 17 23:12:56 exo-elog elogd[4757]: Falling back to default user "elog"
Jul 17 23:12:56 exo-elog elogd[4757]: Cannot restore original GID/UID.
Jul 17 23:12:56 exo-elog elogd[4757]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:12:56 exo-elog elogd[4761]: Falling back to default group "elog"
Jul 17 23:12:56 exo-elog elogd[4761]: Falling back to default user "elog"
Jul 17 23:12:56 exo-elog elogd[4761]: Cannot restore original GID/UID.
Jul 17 23:12:56 exo-elog elogd[4761]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:12:56 exo-elog elogd[4765]: Falling back to default group "elog"
Jul 17 23:12:56 exo-elog elogd[4765]: Falling back to default user "elog"
Jul 17 23:12:56 exo-elog elogd[4765]: Cannot restore original GID/UID.
Jul 17 23:12:56 exo-elog elogd[4765]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:13:00 exo-elog elogd[4769]: Falling back to default group "elog"
Jul 17 23:13:00 exo-elog elogd[4769]: Falling back to default user "elog"
Jul 17 23:13:00 exo-elog elogd[4769]: Cannot restore original GID/UID.
Jul 17 23:13:00 exo-elog elogd[4769]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:13:00 exo-elog elogd[4773]: Falling back to default group "elog"
Jul 17 23:13:00 exo-elog elogd[4773]: Falling back to default user "elog"
Jul 17 23:13:00 exo-elog elogd[4773]: Cannot restore original GID/UID.
Jul 17 23:13:00 exo-elog elogd[4773]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Jul 17 23:13:39 exo-elog kernel: [ 127.737506] elogd[4510]: segfault at b7b43000 eip 080adf19 esp bfdeeb00 error 4
and then crashes! |
preset type useremail with current user, posted by Peter Hirschbichler on Wed Jul 23 11:26:12 2008
|
Hi, I would like to preset an attribute type useremail with $user_email but that does not work because $user_email contains mailto: like mailto:user_email@domain
Has anyone an idea how to resolve this problem?
Type Reporter = useremail
Preset Reporter = $user_email
|
Re: preset type useremail with current user, posted by Stefan Ritt on Wed Jul 23 15:06:59 2008
|
Peter Hirschbichler wrote: |
Hi, I would like to preset an attribute type useremail with $user_email but that does not work because $user_email contains mailto: like mailto:user_email@domain
Has anyone an idea how to resolve this problem?
Type Reporter = useremail
Preset Reporter = $user_email
|
This was a bug. I fixed it in SVN revision 2118. |
WINDOWS binaries with latest fixes., posted by Franck C on Thu Jul 24 11:21:54 2008
|
Hi,
When the WINDOWS binaries with the latest bug fixes will be available on the download page ?
Have a nice day |
Re: WINDOWS binaries with latest fixes., posted by Stefan Ritt on Thu Jul 24 11:28:30 2008
|
Franck C wrote: |
Hi,
When the WINDOWS binaries with the latest bug fixes will be available on the download page ?
Have a nice day
|
Whenever you ask for it
I made you an elog274-1.exe containing revision 2118. |
html code in reply window, posted by Tom Plancon on Thu Jul 31 17:16:20 2008
|
Hello,
Recently upgraded to 2.7.3 and I'm seeing html code filling up the reply window. Before I would just see [quote] and [/quote] around the original entry. Did I miss something in the upgrade? Thanks! |