Re: Edit of multiple posts, posted by Finn Junker on Thu Oct 17 14:57:25 2019
|
Hello Andreas
OK, I did install a version of ELOG with a minimum of settings and the edit of multiple settings works fine. I've tracked the issue to "Locked
Attributes = Bruger". |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 08:50:27 2019
|
Hi Finn,
I don't know if this was intended, but at least I know a possible solution: with the command
"Show
Attributes Edit = "
you can limit the attribute list shown in the edit form to those that are not |
Re: Edit of multiple posts, posted by Finn Junker on Fri Oct 18 09:40:54 2019 
|
Hello Andreas
Show Attributes Edit = xxx, limits the attributes shown when editing but when you submit you get the error
Error: Attribute Bruger not supplied. |
|
Re: Edit of multiple posts, posted by Andreas Luedeke on Fri Oct 18 23:22:50 2019
|
I'm sorry, apparently my tip was not clear: you should use "Show Attributes Edit = " to NOT SHOW any of your locked attributes.
It
is just a guess: if the attribute is not shown in your edit form, it will not complain about it when you submit the form.
Did you try that?
Cheers,
Andreas
Finn |
|
Re: Edit of multiple posts, posted by Finn Junker on Mon Oct 21 10:46:43 2019
|
Hello Andres
Or maybe my reply was unclear :-), but i did use the "Show Attributes Edit" the way you meant to not show attribute BRUGER
and when i do that i get: |
|
Re: Edit of multiple posts, posted by Finn Junker on Tue Oct 22 12:47:06 2019
|
Trial and error - it seems like this combination does the trick:
Locked Attributes = Author
Fixed Attributes Edit = Author |
|
Re: Executing a shell command using elogd Windows service, posted by Frank Baptista on Sun Nov 24 21:10:28 2019
|
Sorry -- I somehow selected the wrong OS in my original message. Asleep at the wheel again.
Frank Baptista wrote:
Greetings! |
|
Re: Executing a shell command using elogd Windows service, posted by Stefan Ritt on Mon Nov 25 16:32:07 2019
|
Wow, having these color signal lamps really looke like a cute solution, made me laugh.
No, there is no other way than the Execute new thing. I have
given up long time ago to use Windows services, because they are very hard to debug and very limited. So at our site everything runs under Linux. |