Hi,

The ELOG website provides new link to RPM packages :

Linux binaries are distributed as RPMs.

EL8/EL9 RPM are also available.

Hi,

Thanks for the links to EL8/EL9. 

Does this package support LDAP and SSL as well?

Yes, same build options are used. 
But i can not'confirm that they are working as well as on EL7. The tests done by build script on CI/CD are quite simple and limited to rpm installation, service start and access from cmdline to elog server.
So thanks to report your personal experience with EL8/9 builds... 🤓

.

Laurent

> 1) "make" fails if libssl-dev package is not installed. Documentation does not mention SSL library requirements.

I added a note to the documentation, thank you.

> 2) /etc/init.d/elogd: line 10: /etc/rc.d/init.d/functions: No such file or directory (I fixed this by commenting
> out that line).
> 
> 3) Starting elogd: /etc/init.d/elogd: line 34: echo_success: command not found (Fixed by search/replace "echo_"
> to "echo ").

The elogd (or elogd.init in the distribution) is written for RedHat based systems where echo_success gives the 
typical output with a green [OK] at the end of the line. For Debian, there is (was) in principle a Debian package 
which has it's own startup script. Since the package maintainer is not active any more (I guess), the Debian 
updates are heavily old. Once elog gets managed inside Debian again, that should get better again, but until then 
one has to follow 2) and 3) from above. If I would remove it, the Scientific Linux users would complain. 

> The elogd (or elogd.init in the distribution) is written for RedHat based systems where echo_success gives the 
> typical output with a green [OK] at the end of the line. For Debian, there is (was) in principle a Debian package 
> which has it's own startup script. Since the package maintainer is not active any more (I guess), the Debian 
> updates are heavily old. Once elog gets managed inside Debian again, that should get better again, but until then 
> one has to follow 2) and 3) from above. If I would remove it, the Scientific Linux users would complain. 

That makes sense. Might be worth adding a short Debian section to the installation instructions page?

FYI, Elog is no longer in Debian as of 2008-05-12.


Thanks,

George.

> > 2) /etc/init.d/elogd: line 10: /etc/rc.d/init.d/functions: No such file or directory (I fixed this by commenting
> > out that line).
> > 
> > 3) Starting elogd: /etc/init.d/elogd: line 34: echo_success: command not found (Fixed by search/replace "echo_"
> > to "echo ").
> 
> The elogd (or elogd.init in the distribution) is written for RedHat based systems where echo_success gives the 
> typical output with a green [OK] at the end of the line. For Debian, there is (was) in principle a Debian package 
> which has it's own startup script. Since the package maintainer is not active any more (I guess), the Debian 
> updates are heavily old. Once elog gets managed inside Debian again, that should get better again, but until then 
> one has to follow 2) and 3) from above. If I would remove it, the Scientific Linux users would complain. 

I'm actually using elog on Debian and have been rolling my own ".deb" for a while now (starting with the old Debian
one and working my way up till 2.7.5). Maybe you could add the Debian /etc/init.d/elog script to the "contrib"
directory, with a suitable note in the README or something like that? That script has not changed in a long time and
is still functional - and doing so would make it easier for people who would like to install elog on a Debian (or
Debian-based, e.g. Ubuntu) system. I'll attach the script.

Regards,

Thomas

> I'm actually using elog on Debian and have been rolling my own ".deb" for a while now (starting with the old 
Debian
> Maybe you could add the Debian /etc/init.d/elog script to the "contrib"
> directory, with a suitable note in the README or something like that? That script has not changed in a long 
time and
> is still functional - and doing so would make it easier for people who would like to install elog on a Debian 
(or
> Debian-based, e.g. Ubuntu) system. I'll attach the script.

The problem is not putting this into the "conrib" area, but supporting it. Since I don't have a Debian system, 
may I suggest that you put it yourself into the elog:Contributions/ logbook. If people then get problems in the 
future, they can contact you directly ;-)

> The problem is not putting this into the "conrib" area, but supporting it. Since I don't have a Debian system, 
> may I suggest that you put it yourself into the elog:Contributions/ logbook. If people then get problems in the 
> future, they can contact you directly ;-)

I finally got round to do so. I've also included the changes suggested by Yoshio Imai (reload functionality).
Hopefully, it is useful for someone...