Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Terry Almond on Mon Jan 30 15:50:45 2017
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Stefan Ritt on Mon Jan 30 16:47:31 2017
|
Linking to external files via "file:///..." is a bad idea, since only a pointer is stored in the elog. So if someone puts somehing on M: and the drive is removed, the file is physically gone. No way to retrieve it. Instead of puttting links to files, users should get trained to ATTACH the files to elog cntries (V3 of elog has a "Drop attachments here..." section. Only then the files are physically transferred into elog and accessible independed of your external memory stick.
Stefan
| Terry Almond wrote: |
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
|
|
Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Terry Almond on Mon Jan 30 16:56:34 2017
|
Hi Stefan
Unfortunately this would become impractical for us as many of the test data files which we'd need to link too are Gb's in size, some over 100Gb, hence only the files needed to do a say an inspection of the equipment would be copied onto memory sticks. Currently we use an excel speadsheet to store hyperlinks to all of the files / directories we need - unfortunately some people forget to update this and it was asked could we do it using elog as people are familiar with this wonderful peice of software.
Hence why i'm now investigating - so is it actually posible?
Kind regards
Terry
| Stefan Ritt wrote: |
|
Linking to external files via "file:///..." is a bad idea, since only a pointer is stored in the elog. So if someone puts somehing on M: and the drive is removed, the file is physically gone. No way to retrieve it. Instead of puttting links to files, users should get trained to ATTACH the files to elog cntries (V3 of elog has a "Drop attachments here..." section. Only then the files are physically transferred into elog and accessible independed of your external memory stick.
Stefan
| Terry Almond wrote: |
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
|
|
|
Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Stefan Ritt on Mon Jan 30 17:45:18 2017
|
If a file is on a memorystick and the memorystick is gone, how could elog bring it back? What you ask for is magic, sorry for that. Also if you move files outiside elog from one folder (drive) to anohter. How shoudl elog keep track of these files if they are outside? If your colleague moves some piece of equipment from A to B, without telling you, how can you guess where B is?
| Terry Almond wrote: |
|
Hi Stefan
Unfortunately this would become impractical for us as many of the test data files which we'd need to link too are Gb's in size, some over 100Gb, hence only the files needed to do a say an inspection of the equipment would be copied onto memory sticks. Currently we use an excel speadsheet to store hyperlinks to all of the files / directories we need - unfortunately some people forget to update this and it was asked could we do it using elog as people are familiar with this wonderful peice of software.
Hence why i'm now investigating - so is it actually posible?
Kind regards
Terry
| Stefan Ritt wrote: |
|
Linking to external files via "file:///..." is a bad idea, since only a pointer is stored in the elog. So if someone puts somehing on M: and the drive is removed, the file is physically gone. No way to retrieve it. Instead of puttting links to files, users should get trained to ATTACH the files to elog cntries (V3 of elog has a "Drop attachments here..." section. Only then the files are physically transferred into elog and accessible independed of your external memory stick.
Stefan
| Terry Almond wrote: |
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
|
|
|
|
Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Terry Almond on Tue Jan 31 11:42:19 2017
|
Hi Stefan,
Obviously it's not magic but my inability to explain. I've attached a quick jpg of the file structure we use. So for every project we just repeat the file structure. It then becomes a browser based interface for our engineers, inspectors, project managers etc. so via the network they can access the data anywhere onsite.
Elog is used in an iframe on the manrec page. Here we record several logs (a record of everything we do, a record of test equipment, tools used, harnesses, connectors made and disconnected, etc. and what i'm now trying to achieve a document record / check list).
Now in the data directory we store hundreds of documents from procedures, circuit diagrams, mechanical drawings, parts lists, test reports and data, inspection reports, down to consumables like what type of cloth and liquid was used to wipe down a cable.
So the bulk of documents can fit on to an 8G memory stick, the only section that doesn't fit is the test data. So when we need to move off site, or supply this data to a subcontractor we copy the contents (minus the test data) on to a memory stick, when the memory stick is returned we simply synchronise it back to the network. So the only links that would fail to work off site are links to test data - which we are not worried about.
Now, any new person working on the project needs to review the check list (hopefully the new elog if i can get it to work) part of this check list / document record could say something like - carry out inspection, refer to drawing <href link> now this is where the problem occurs, as when the files are on the site based machine, we know the file structure is on the M:Drive; however when the memory stick is now plugged into a subcontractors machine / laptop we have no control of the drive allocation, so how can i get the link to the drawing to work?
When they finish the job required, they upload the data to the memory stick and state where. ie inspection carried out - results passed see report "xyz" <href link>
I hope this now makes more sense
Kind regards
Terry
| Stefan Ritt wrote: |
|
If a file is on a memorystick and the memorystick is gone, how could elog bring it back? What you ask for is magic, sorry for that. Also if you move files outiside elog from one folder (drive) to anohter. How shoudl elog keep track of these files if they are outside? If your colleague moves some piece of equipment from A to B, without telling you, how can you guess where B is?
| Terry Almond wrote: |
|
Hi Stefan
Unfortunately this would become impractical for us as many of the test data files which we'd need to link too are Gb's in size, some over 100Gb, hence only the files needed to do a say an inspection of the equipment would be copied onto memory sticks. Currently we use an excel speadsheet to store hyperlinks to all of the files / directories we need - unfortunately some people forget to update this and it was asked could we do it using elog as people are familiar with this wonderful peice of software.
Hence why i'm now investigating - so is it actually posible?
Kind regards
Terry
| Stefan Ritt wrote: |
|
Linking to external files via "file:///..." is a bad idea, since only a pointer is stored in the elog. So if someone puts somehing on M: and the drive is removed, the file is physically gone. No way to retrieve it. Instead of puttting links to files, users should get trained to ATTACH the files to elog cntries (V3 of elog has a "Drop attachments here..." section. Only then the files are physically transferred into elog and accessible independed of your external memory stick.
Stefan
| Terry Almond wrote: |
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
|
|
|
|
|
Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Stefan Ritt on Tue Jan 31 12:46:30 2017
|
Sure, we (Andreas and I) get your point. But you say "... we have no control of the device allocation". If you have no control, how could elog have control? As Adreas said, the file:// access is even done inside your browser, thus bypassing elog, so you have to tell your browser where to find the files. I cannot say more than what Andreas said in elog:68562
Stefan
| Terry Almond wrote: |
|
Hi Stefan,
Obviously it's not magic but my inability to explain. I've attached a quick jpg of the file structure we use. So for every project we just repeat the file structure. It then becomes a browser based interface for our engineers, inspectors, project managers etc. so via the network they can access the data anywhere onsite.
Elog is used in an iframe on the manrec page. Here we record several logs (a record of everything we do, a record of test equipment, tools used, harnesses, connectors made and disconnected, etc. and what i'm now trying to achieve a document record / check list).
Now in the data directory we store hundreds of documents from procedures, circuit diagrams, mechanical drawings, parts lists, test reports and data, inspection reports, down to consumables like what type of cloth and liquid was used to wipe down a cable.
So the bulk of documents can fit on to an 8G memory stick, the only section that doesn't fit is the test data. So when we need to move off site, or supply this data to a subcontractor we copy the contents (minus the test data) on to a memory stick, when the memory stick is returned we simply synchronise it back to the network. So the only links that would fail to work off site are links to test data - which we are not worried about.
Now, any new person working on the project needs to review the check list (hopefully the new elog if i can get it to work) part of this check list / document record could say something like - carry out inspection, refer to drawing <href link> now this is where the problem occurs, as when the files are on the site based machine, we know the file structure is on the M:Drive; however when the memory stick is now plugged into a subcontractors machine / laptop we have no control of the drive allocation, so how can i get the link to the drawing to work?
When they finish the job required, they upload the data to the memory stick and state where. ie inspection carried out - results passed see report "xyz" <href link>
I hope this now makes more sense
Kind regards
Terry
| Stefan Ritt wrote: |
|
If a file is on a memorystick and the memorystick is gone, how could elog bring it back? What you ask for is magic, sorry for that. Also if you move files outiside elog from one folder (drive) to anohter. How shoudl elog keep track of these files if they are outside? If your colleague moves some piece of equipment from A to B, without telling you, how can you guess where B is?
| Terry Almond wrote: |
|
Hi Stefan
Unfortunately this would become impractical for us as many of the test data files which we'd need to link too are Gb's in size, some over 100Gb, hence only the files needed to do a say an inspection of the equipment would be copied onto memory sticks. Currently we use an excel speadsheet to store hyperlinks to all of the files / directories we need - unfortunately some people forget to update this and it was asked could we do it using elog as people are familiar with this wonderful peice of software.
Hence why i'm now investigating - so is it actually posible?
Kind regards
Terry
| Stefan Ritt wrote: |
|
Linking to external files via "file:///..." is a bad idea, since only a pointer is stored in the elog. So if someone puts somehing on M: and the drive is removed, the file is physically gone. No way to retrieve it. Instead of puttting links to files, users should get trained to ATTACH the files to elog cntries (V3 of elog has a "Drop attachments here..." section. Only then the files are physically transferred into elog and accessible independed of your external memory stick.
Stefan
| Terry Almond wrote: |
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
|
|
|
|
|
|
Re: Opening a Local File using <a href="file:///../filename.doc">text</a>, posted by Andreas Luedeke on Tue Jan 31 08:18:05 2017
|
Hi Terry,
I'm not really sure I understand the question; I'll try to rephrase how I understood it.
You have loads of measurement data. All this data is stored not in ELOG but in a common drive M:.
When people work off-site, they copy the ELOG data and all the measurement data they need to a memory stick and run ELOG from there.
But the now copied links in ELOG still point to the M: drive, but they should instead now point to the local memory stick.
Did I understand that correctly?
It is a feature of the browser, that it does not allow a relative path in URLs with the "file:" protocol. Relative to what should it be? To where the browser has been started from? The browser does not know where ELOG resides.
If I understood the problem correctly, then I see several options:
1) Under Linux I would create a symblic link like "/mnt/measurementdata/" that points at work to "file:///M:/Data/" and off-site to the drive on the memory stick.
In the ELOG entries I would only use this symbolic link "/mnt/measurementdata/Inspection%20Reports/ABC123.doc".
This should somehow be possible with Windows, too. See e.g. https://msdn.microsoft.com/en-us/library/windows/desktop/aa363878%28v=vs.85%29.aspx . But I'm not a Windows expert.
2) You write a little "Copy ELOG and dataset" script, that will copy all desired files to the memory stick and changes all references to the copied datasets to the new location.
This is very easy to do for any programmer, since one need only do a text-search-and-replace on the ELOG text-files, like:
replace "file:///M:/Data/" with ""file:///F:/Data/" in all *a.log.
3) You might even convince Windows to mount your memory stick as drive "M:". Just copy then the full path to the memory stick: problem solved!
Drive "M:" will rarely ever be defined already on your remote computer. I know that this was possible with Windows NT, I have no idea if this works with Windows 10. Ask google ;-)
I hope that helped?
Cheers, Andreas
| Terry Almond wrote: |
|
I've created an elog where users can then enter links to a file: for example they would enter:
<a href="file:///M:/Data/Inspection%20Reports/ABC123.doc">ABC123</a>
If they are running this on their desktops where everyones M drive is mapped to the same location, not a problem, the file opens perfectly.
The problem we have is some people work off of site and hence they run everything from a memory stick (USB drive), then once back in the office, copy the memory stick back on to the network.
Unfortunately when off of site the href link M: is no longer valid as the M drive doesn't exist.
Hence i've been trying to open a local file with the following syntax:
<a href="file:///../ABC123.doc">ABC123</a>
It just won't open
Hence in my frustration i basically copied the word file ABC123.doc into every single directory on the memory stick thinking surely this must work, it must find it somewhere, unfortunately not.
What am i doing wrong?
|
|
Elog crashing at random intervals, posted by Lee Burnside on Sat Jan 28 22:23:46 2017
|
We're running Elog 3.1.2 om SL 7.2 and keep getting random crashes, sometimes when no one is accessing a logbook. The following is from /var/log/messages with debugging turned on after the latest crash.
Jan 28 12:43:56 archer elogd[9629]: POST /PHYS3305Spring2017/ HTTP/1.1
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "ajs_anonymous_id"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "ajs_user_id"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "ajs_group_id"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "__utma"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "__utmz"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "elc"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "_ga"
Jan 28 12:43:56 archer kernel: elogd[9629]: segfault at 0 ip 000000000042237e sp 00007ffe50fcfdc0 error 4 in elogd[400000+8b000]
Jan 28 12:43:56 archer systemd: elogd.service: main process exited, code=killed, status=11/SEGV
Jan 28 12:43:56 archer systemd: Unit elogd.service entered failed state.
Jan 28 12:43:56 archer systemd: elogd.service failed.
Nothing odd in the logbooks, no real activity happening at the time of any crash. Crashes after any amount of time from 1 hour to 24 hours, with littleAny clues?
|
|
Re: Elog crashing at random intervals, posted by Lee Burnside on Mon Jan 30 12:03:36 2017
|
Never mind, version from github solved issue.
Lee
| Lee Burnside wrote: |
|
We're running Elog 3.1.2 om SL 7.2 and keep getting random crashes, sometimes when no one is accessing a logbook. The following is from /var/log/messages with debugging turned on after the latest crash.
Jan 28 12:43:56 archer elogd[9629]: POST /PHYS3305Spring2017/ HTTP/1.1
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "ajs_anonymous_id"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "ajs_user_id"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "ajs_group_id"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "__utma"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "__utmz"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "elc"
Jan 28 12:43:56 archer elogd[9629]: Received unknown cookie "_ga"
Jan 28 12:43:56 archer kernel: elogd[9629]: segfault at 0 ip 000000000042237e sp 00007ffe50fcfdc0 error 4 in elogd[400000+8b000]
Jan 28 12:43:56 archer systemd: elogd.service: main process exited, code=killed, status=11/SEGV
Jan 28 12:43:56 archer systemd: Unit elogd.service entered failed state.
Jan 28 12:43:56 archer systemd: elogd.service failed.
Nothing odd in the logbooks, no real activity happening at the time of any crash. Crashes after any amount of time from 1 hour to 24 hours, with littleAny clues?
|
|
|
elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Mon Jan 9 17:15:56 2017
|
My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519.
I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964). I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it. I therefore rolled the linux server back to the standard public 3.1.2 version.
On the remote Mac, synchronizations usually look like they are going to work fine, with Mirror simulate = 1 switched on. After I set Mirror simulate = 0, and if the server and remote logbook are already identical, I *occasionally* get the proper "All Entries Identical" synchronization result. Unfortunately, this is very rare, and usually there is a failure whereby the remote (Mac) logbook decides that a significant fraction of its entries (usually sequential, from some seemingly random entry all the way up to the last entry) are missing on the linux server and need to be submitted back to the server from the remote Mac.
When the local and remote logbooks are not identical, and a record in need of synchronization contains an attachment, there is again destructive behaviour similar to that described above, except that the Mac elogd executable usually crashes. (As in the case of the already-identical synchronizations described above, I only tested this after observing the correct expected behaviour first with Mirror simulate = 1.)
I'd be grateful for some help/suggestions. My current testing suggests that my problems are likely not elog-content dependent. (The logbook now undergoing synching has less than 10 entries in it.)
More generally, the issue of having things behave fine with Mirror simulate = 1, but then experiencing corruption/damage when switching to Mirror simulate = 0 seems serious to me.
Many thanks, Andreas
|
Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Fri Jan 13 08:27:15 2017 
|
The attached screenshot shows the behaviour after doing a synchronization (with Mirror simulate = 1) following first having ensured that the local (Mac) and remote (linux) ELOGs initially showed "All entries identical" when doing a simulated synchronization, and then having edited local entries 9707 and 9709 by uploading (different) attachments to them.
The fact that the synchronization is suggesting to renumber two different entry IDs to the same number looks like a bug.
Best regards,
Andreas W.
| Andreas Warburton wrote: |
|
My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519.
I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964). I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it. I therefore rolled the linux server back to the standard public 3.1.2 version.
On the remote Mac, synchronizations usually look like they are going to work fine, with Mirror simulate = 1 switched on. After I set Mirror simulate = 0, and if the server and remote logbook are already identical, I *occasionally* get the proper "All Entries Identical" synchronization result. Unfortunately, this is very rare, and usually there is a failure whereby the remote (Mac) logbook decides that a significant fraction of its entries (usually sequential, from some seemingly random entry all the way up to the last entry) are missing on the linux server and need to be submitted back to the server from the remote Mac.
When the local and remote logbooks are not identical, and a record in need of synchronization contains an attachment, there is again destructive behaviour similar to that described above, except that the Mac elogd executable usually crashes. (As in the case of the already-identical synchronizations described above, I only tested this after observing the correct expected behaviour first with Mirror simulate = 1.)
I'd be grateful for some help/suggestions. My current testing suggests that my problems are likely not elog-content dependent. (The logbook now undergoing synching has less than 10 entries in it.)
More generally, the issue of having things behave fine with Mirror simulate = 1, but then experiencing corruption/damage when switching to Mirror simulate = 0 seems serious to me.
Many thanks, Andreas
|
|
|
Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Fri Jan 13 21:05:49 2017
|
When I switch from SSL = 1 to SSL = 0 and I use http:// instead of https://, the ability to upload attachments to logbook entries returns. With both Chrome and Safari browsers, with SSL = 1 the file upload hangs after only a small percentage of the file has been uploaded. I ran the following openssl diagnostic on my elogd port. Would anyone have advice on what might be causing such errors?
tapajo [/usr/local/elog/elog-latest] openssl s_client -connect elog.hep.xxx.xxx.xx:80xx -state -nbio | grep "^SSL"
SSL_connect:before/connect initialization
SSL_connect:SSLv2/v3 write client hello A
SSL_connect:error in SSLv2/v3 read server hello A
SSL_connect:unknown state
depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost
verify error:num=18:self signed certificate
verify return:1
depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost
verify return:1
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:error in unknown state
SSL_connect:error in unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL handshake has read 1733 bytes and written 871 bytes
SSL-Session:
SSL3 alert read:warning:close notify
SSL3 alert write:warning:close notify
| Andreas Warburton wrote: |
|
The attached screenshot shows the behaviour after doing a synchronization (with Mirror simulate = 1) following first having ensured that the local (Mac) and remote (linux) ELOGs initially showed "All entries identical" when doing a simulated synchronization, and then having edited local entries 9707 and 9709 by uploading (different) attachments to them.
The fact that the synchronization is suggesting to renumber two different entry IDs to the same number looks like a bug.
Best regards,
Andreas W.
| Andreas Warburton wrote: |
|
My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519.
I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964). I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it. I therefore rolled the linux server back to the standard public 3.1.2 version.
On the remote Mac, synchronizations usually look like they are going to work fine, with Mirror simulate = 1 switched on. After I set Mirror simulate = 0, and if the server and remote logbook are already identical, I *occasionally* get the proper "All Entries Identical" synchronization result. Unfortunately, this is very rare, and usually there is a failure whereby the remote (Mac) logbook decides that a significant fraction of its entries (usually sequential, from some seemingly random entry all the way up to the last entry) are missing on the linux server and need to be submitted back to the server from the remote Mac.
When the local and remote logbooks are not identical, and a record in need of synchronization contains an attachment, there is again destructive behaviour similar to that described above, except that the Mac elogd executable usually crashes. (As in the case of the already-identical synchronizations described above, I only tested this after observing the correct expected behaviour first with Mirror simulate = 1.)
I'd be grateful for some help/suggestions. My current testing suggests that my problems are likely not elog-content dependent. (The logbook now undergoing synching has less than 10 entries in it.)
More generally, the issue of having things behave fine with Mirror simulate = 1, but then experiencing corruption/damage when switching to Mirror simulate = 0 seems serious to me.
Many thanks, Andreas
|
|
|
Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Sat Jan 14 08:27:42 2017
|
For the time being, I am deeming ELOG 3.1.2 unusable with https (SSL = 1) functionality on my "Debian GNU/Linux 7 (wheezy)" server with "OpenSSL 1.0.1t", due to the described apparent issues with SSL. Reverting to http (SSL = 0) brings back my ability to upload attachments and synchronize with a remote elogd running on a MacOS laptop.
Interestingly, my records indicate that I suffered a problem with very similar symptoms back in 2011, with version 2.8.0. The problem at that time, which is acknowledged in the Changelog as "Fixed bug with SSL connection shutdown", got fixed in version 2.9.0. Perhaps, when the "Replaced insecure SSLv23 with TLSv1 method" change was implemented for version 3.0.0, a similar issue was (re-)introduced?
It would of course be best if this issue were resolvable soon, due to the security vulnerabilities of http versus https. Thank you in advance for any efforts!
Best regards,
Andreas Warburton
| Andreas Warburton wrote: |
|
When I switch from SSL = 1 to SSL = 0 and I use http:// instead of https://, the ability to upload attachments to logbook entries returns. With both Chrome and Safari browsers, with SSL = 1 the file upload hangs after only a small percentage of the file has been uploaded. I ran the following openssl diagnostic on my elogd port. Would anyone have advice on what might be causing such errors?
tapajo [/usr/local/elog/elog-latest] openssl s_client -connect elog.hep.xxx.xx:80xx -state -nbio | grep "^SSL"
SSL_connect:before/connect initialization
SSL_connect:SSLv2/v3 write client hello A
SSL_connect:error in SSLv2/v3 read server hello A
SSL_connect:unknown state
depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost
verify error:num=18:self signed certificate
verify return:1
depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost
verify return:1
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:error in unknown state
SSL_connect:error in unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL handshake has read 1733 bytes and written 871 bytes
SSL-Session:
SSL3 alert read:warning:close notify
SSL3 alert write:warning:close notify
| Andreas Warburton wrote: |
|
The attached screenshot shows the behaviour after doing a synchronization (with Mirror simulate = 1) following first having ensured that the local (Mac) and remote (linux) ELOGs initially showed "All entries identical" when doing a simulated synchronization, and then having edited local entries 9707 and 9709 by uploading (different) attachments to them.
The fact that the synchronization is suggesting to renumber two different entry IDs to the same number looks like a bug.
Best regards,
Andreas W.
| Andreas Warburton wrote: |
|
My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519.
I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964). I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it. I therefore rolled the linux server back to the standard public 3.1.2 version.
On the remote Mac, synchronizations usually look like they are going to work fine, with Mirror simulate = 1 switched on. After I set Mirror simulate = 0, and if the server and remote logbook are already identical, I *occasionally* get the proper "All Entries Identical" synchronization result. Unfortunately, this is very rare, and usually there is a failure whereby the remote (Mac) logbook decides that a significant fraction of its entries (usually sequential, from some seemingly random entry all the way up to the last entry) are missing on the linux server and need to be submitted back to the server from the remote Mac.
When the local and remote logbooks are not identical, and a record in need of synchronization contains an attachment, there is again destructive behaviour similar to that described above, except that the Mac elogd executable usually crashes. (As in the case of the already-identical synchronizations described above, I only tested this after observing the correct expected behaviour first with Mirror simulate = 1.)
I'd be grateful for some help/suggestions. My current testing suggests that my problems are likely not elog-content dependent. (The logbook now undergoing synching has less than 10 entries in it.)
More generally, the issue of having things behave fine with Mirror simulate = 1, but then experiencing corruption/damage when switching to Mirror simulate = 0 seems serious to me.
Many thanks, Andreas
|
|
|
|
|
Re: elogd crashes during SSL Mirror operations involving attachments, posted by Andreas Warburton on Thu Jan 19 12:56:51 2017
|
Further to my comment in https://midas.psi.ch/elogs/Forum/68549, if the described synchronization requires attachment(s) to be transferred from my Mac laptop to the Debian linux server (with SSL = 0 set), it fails in all the tests that I tried.
To check whether these problems are linked to the OpenSSL version on the linux server, we also tried building an elogd executable using 1.0.2j instead of 1.0.1t. This did not appear to change/improve the behaviour.
I'd like to keep using ELOG into the foreseeable future. Don't hesitate to contact me if you'd like me to beta test any upcoming releases. I'd appreciate having the earlier mirroring and attachment-handling functionality back again.
Best regards,
Andreas W.
| Andreas Warburton wrote: |
|
For the time being, I am deeming ELOG 3.1.2 unusable with https (SSL = 1) functionality on my "Debian GNU/Linux 7 (wheezy)" server with "OpenSSL 1.0.1t", due to the described apparent issues with SSL. Reverting to http (SSL = 0) brings back my ability to upload attachments and synchronize with a remote elogd running on a MacOS laptop.
Interestingly, my records indicate that I suffered a problem with very similar symptoms back in 2011, with version 2.8.0. The problem at that time, which is acknowledged in the Changelog as "Fixed bug with SSL connection shutdown", got fixed in version 2.9.0. Perhaps, when the "Replaced insecure SSLv23 with TLSv1 method" change was implemented for version 3.0.0, a similar issue was (re-)introduced?
It would of course be best if this issue were resolvable soon, due to the security vulnerabilities of http versus https. Thank you in advance for any efforts!
Best regards,
Andreas Warburton
| Andreas Warburton wrote: |
|
When I switch from SSL = 1 to SSL = 0 and I use http:// instead of https://, the ability to upload attachments to logbook entries returns. With both Chrome and Safari browsers, with SSL = 1 the file upload hangs after only a small percentage of the file has been uploaded. I ran the following openssl diagnostic on my elogd port. Would anyone have advice on what might be causing such errors?
tapajo [/usr/local/elog/elog-latest] openssl s_client -connect elog.hep.xxx.xx:80xx -state -nbio | grep "^SSL"
SSL_connect:before/connect initialization
SSL_connect:SSLv2/v3 write client hello A
SSL_connect:error in SSLv2/v3 read server hello A
SSL_connect:unknown state
depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost
verify error:num=18:self signed certificate
verify return:1
depth=0 C = EU, ST = SomeState, L = SomeCity, O = SomeOranization, OU = SomeOrganizationUnit, CN = localhost
verify return:1
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL_connect:error in unknown state
SSL_connect:error in unknown state
SSL_connect:unknown state
SSL_connect:unknown state
SSL handshake has read 1733 bytes and written 871 bytes
SSL-Session:
SSL3 alert read:warning:close notify
SSL3 alert write:warning:close notify
| Andreas Warburton wrote: |
|
The attached screenshot shows the behaviour after doing a synchronization (with Mirror simulate = 1) following first having ensured that the local (Mac) and remote (linux) ELOGs initially showed "All entries identical" when doing a simulated synchronization, and then having edited local entries 9707 and 9709 by uploading (different) attachments to them.
The fact that the synchronization is suggesting to renumber two different entry IDs to the same number looks like a bug.
Best regards,
Andreas W.
| Andreas Warburton wrote: |
|
My MacOS (10.12.2) elogd version V3.1.2 is a recent git commit (edc5e85), due to the fix to my earlier-described issue solved in the thread here: https://midas.psi.ch/elogs/Forum/68519.
I am trying to (re-)set up Mirror functionality with a linux server running the standard public (V3.1.2-bd75964). I had initially updated the linux server so that it also had the latest git commit (edc5e85), but could then not even add new logbook entries that involved attachments to it. I therefore rolled the linux server back to the standard public 3.1.2 version.
On the remote Mac, synchronizations usually look like they are going to work fine, with Mirror simulate = 1 switched on. After I set Mirror simulate = 0, and if the server and remote logbook are already identical, I *occasionally* get the proper "All Entries Identical" synchronization result. Unfortunately, this is very rare, and usually there is a failure whereby the remote (Mac) logbook decides that a significant fraction of its entries (usually sequential, from some seemingly random entry all the way up to the last entry) are missing on the linux server and need to be submitted back to the server from the remote Mac.
When the local and remote logbooks are not identical, and a record in need of synchronization contains an attachment, there is again destructive behaviour similar to that described above, except that the Mac elogd executable usually crashes. (As in the case of the already-identical synchronizations described above, I only tested this after observing the correct expected behaviour first with Mirror simulate = 1.)
I'd be grateful for some help/suggestions. My current testing suggests that my problems are likely not elog-content dependent. (The logbook now undergoing synching has less than 10 entries in it.)
More generally, the issue of having things behave fine with Mirror simulate = 1, but then experiencing corruption/damage when switching to Mirror simulate = 0 seems serious to me.
Many thanks, Andreas
|
|
|
|
|
|
"No SMTP host defined in [global] section of configuration file", posted by Luca on Wed Jan 18 05:25:44 2017
|
Hi,
I started re-using after a month an elog on my linux machine and, without any apparent reason since I did not used the machine at all in the last month, every time I try to submit a post I get the following error
"No SMTP host defined in [global] section of configuration file".
The weird thing is that today I created a new logbook using the previous one as a template and, on the new one, I can post without problem (although the configuration is identical).
Do you know what could be causing this?
Thnaks
R |
|
Re: "No SMTP host defined in [global] section of configuration file", posted by Stefan Ritt on Wed Jan 18 10:25:20 2017
|
These problems usually come when you are using a different configuration file that the one you think you are using. Note that you explicitly can tell elogd to use a specific configuation file with the "-c" flag. Also make sure to restart elogd after major changes.
| Luca wrote: |
|
Hi,
I started re-using after a month an elog on my linux machine and, without any apparent reason since I did not used the machine at all in the last month, every time I try to submit a post I get the following error
"No SMTP host defined in [global] section of configuration file".
The weird thing is that today I created a new logbook using the previous one as a template and, on the new one, I can post without problem (although the configuration is identical).
Do you know what could be causing this?
Thnaks
R
|
|
|
UTC time, posted by Luca on Mon Jan 9 15:39:59 2017
|
Dear all,
I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?
Thanks
Luca
Theme = default
Comment = XENON1T LogBook
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info = background-color:lightblue
Cell Style Status Closed - solved = background-color:lightgreen
Cell Style Status Open - in progress = background-color:yellow
Cell Style Status Closed - unsolved = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category |
|
Re: UTC time, posted by Stefan Ritt on Mon Jan 9 17:18:15 2017
|
How do you believe that you can preset a Submission item? Preset only works for attributes, so you have to define an attribute like "Submission UTC" or similar and preset this attribute with
Preset Submission UTC = $utcdate
| Luca wrote: |
|
Dear all,
I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?
Thanks
Luca
Theme = default
Comment = XENON1T LogBook
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info = background-color:lightblue
Cell Style Status Closed - solved = background-color:lightgreen
Cell Style Status Open - in progress = background-color:yellow
Cell Style Status Closed - unsolved = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category
|
|
|
Re: UTC time, posted by Luca on Mon Jan 9 17:26:37 2017
|
Dear Steve,
thanks a lot. Sorry but I am not expert of elog. I "inherited" from a colleague and wanted to see if I can keep it alive but to do it I would need to move to UTC. Should this command affect the "INSERT CURRENT TIME/DATE" button? It does not seem to change.
Best
Luca
| Stefan Ritt wrote: |
|
How do you believe that you can preset a Submission item? Preset only works for attributes, so you have to define an attribute like "Submission UTC" or similar and preset this attribute with
Preset Submission UTC = $utcdate
| Luca wrote: |
|
Dear all,
I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?
Thanks
Luca
Theme = default
Comment = XENON1T LogBook
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info = background-color:lightblue
Cell Style Status Closed - solved = background-color:lightgreen
Cell Style Status Open - in progress = background-color:yellow
Cell Style Status Closed - unsolved = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category
|
|
|
|
Re: UTC time, posted by Luca on Thu Jan 12 02:35:02 2017
|
Any suggestion?
| Luca wrote: |
|
Dear Steve,
thanks a lot. Sorry but I am not expert of elog. I "inherited" from a colleague and wanted to see if I can keep it alive but to do it I would need to move to UTC. Should this command affect the "INSERT CURRENT TIME/DATE" button? It does not seem to change.
Best
Luca
| Stefan Ritt wrote: |
|
How do you believe that you can preset a Submission item? Preset only works for attributes, so you have to define an attribute like "Submission UTC" or similar and preset this attribute with
Preset Submission UTC = $utcdate
| Luca wrote: |
|
Dear all,
I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?
Thanks
Luca
Theme = default
Comment = XENON1T LogBook
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info = background-color:lightblue
Cell Style Status Closed - solved = background-color:lightgreen
Cell Style Status Open - in progress = background-color:yellow
Cell Style Status Closed - unsolved = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category
|
|
|
|
|
Re: UTC time, posted by Stefan Ritt on Thu Jan 12 08:28:45 2017
|
The INSERT CURRENT TIME/DATE button is not affected by this setting.
| Luca wrote: |
|
Dear Steve,
thanks a lot. Sorry but I am not expert of elog. I "inherited" from a colleague and wanted to see if I can keep it alive but to do it I would need to move to UTC. Should this command affect the "INSERT CURRENT TIME/DATE" button? It does not seem to change.
Best
Luca
| Stefan Ritt wrote: |
|
How do you believe that you can preset a Submission item? Preset only works for attributes, so you have to define an attribute like "Submission UTC" or similar and preset this attribute with
Preset Submission UTC = $utcdate
| Luca wrote: |
|
Dear all,
I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?
Thanks
Luca
Theme = default
Comment = XENON1T LogBook
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info = background-color:lightblue
Cell Style Status Closed - solved = background-color:lightgreen
Cell Style Status Open - in progress = background-color:yellow
Cell Style Status Closed - unsolved = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category
|
|
|
|
|
Re: UTC time, posted by Andreas Luedeke on Thu Jan 12 09:10:06 2017
|
Hi Luca,
if you want to change all datetime properties to UTC time, then you'll just need to set the timezone on the server to UTC, before elogd is started.
Cheers, Andreas
| Luca wrote: |
|
Dear Steve,
thanks a lot. Sorry but I am not expert of elog. I "inherited" from a colleague and wanted to see if I can keep it alive but to do it I would need to move to UTC. Should this command affect the "INSERT CURRENT TIME/DATE" button? It does not seem to change.
Best
Luca
| Stefan Ritt wrote: |
|
How do you believe that you can preset a Submission item? Preset only works for attributes, so you have to define an attribute like "Submission UTC" or similar and preset this attribute with
Preset Submission UTC = $utcdate
| Luca wrote: |
|
Dear all,
I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?
Thanks
Luca
Theme = default
Comment = XENON1T LogBook
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info = background-color:lightblue
Cell Style Status Closed - solved = background-color:lightgreen
Cell Style Status Open - in progress = background-color:yellow
Cell Style Status Closed - unsolved = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category
|
|
|
|
|
Limit number of characters for "login user" parameter string ?, posted by Christine Quicot on Tue Jan 10 09:59:30 2017
|
Hello all,
I use ELOG for about 30 users, and I've listed their email adresses in the "login user" parameter, using the LDAP authentication.
As I had problems with the users from the end of the list (they couldn't log in the logbooks) I guessed that there is a max length for the string "login user" (or other parameter?). it seems to be a 1000 character limit.
How can I parameter this limit to another value? Is this value used for other parameters?
Thanks for your answer. |
|
Re: Limit number of characters for "login user" parameter string ?, posted by Stefan Ritt on Tue Jan 10 11:13:02 2017
|
There is a limit of 100 options per line, so you probably run against that. This is defined in elogd.h with MAX_N_LIST and MAX_N_ATTR. You can try to increase these and recompile, but at some point you will hit the stack size limit of your operating system and elogd will crash.
| Christine Quicot wrote: |
|
Hello all,
I use ELOG for about 30 users, and I've listed their email adresses in the "login user" parameter, using the LDAP authentication.
As I had problems with the users from the end of the list (they couldn't log in the logbooks) I guessed that there is a max length for the string "login user" (or other parameter?). it seems to be a 1000 character limit.
How can I parameter this limit to another value? Is this value used for other parameters?
Thanks for your answer.
|
|
Is it possible to add custom menu commands, posted by Alex Kühnel on Sun Jan 8 19:26:29 2017
|
hi forum,
my question, is it possible to add a custom menu entry (f.e. "Auswertung"). I will start a new php page and do some system code starting from the new page. I have attached a pic of my "Bereitschaftsdoku".
I have a filter for the week (KW1 2017). With this filer i display all my jobs for this week. At the end I have to count all minutes for class 583 (Tagesstunden) and class 586 (Sonn und Feiertage) and display the results.
regards
/alex |
|
Re: Is it possible to add custom menu commands, posted by Stefan Ritt on Mon Jan 9 11:00:53 2017
|
No, calculations are not easily possible with elog. You can write some Javascript code to pull out all minutes, add them up and manipulate the DOM tree to show the results, but this requires some JavaScript knowlegde. Alternatively, export your table to a CSV file and do your calculations with a spreadhseet program.
/Stefan
| Alex Kühnel wrote: |
|
hi forum,
my question, is it possible to add a custom menu entry (f.e. "Auswertung"). I will start a new php page and do some system code starting from the new page. I have attached a pic of my "Bereitschaftsdoku".
I have a filter for the week (KW1 2017). With this filer i display all my jobs for this week. At the end I have to count all minutes for class 583 (Tagesstunden) and class 586 (Sonn und Feiertage) and display the results.
regards
/alex
|
|
|
Re: Is it possible to add custom menu commands, posted by Alex Kühnel on Mon Jan 9 16:02:35 2017
|
ok, tnx! I will do the export and calculation with Excel
regards
/alex
| Stefan Ritt wrote: |
|
No, calculations are not easily possible with elog. You can write some Javascript code to pull out all minutes, add them up and manipulate the DOM tree to show the results, but this requires some JavaScript knowlegde. Alternatively, export your table to a CSV file and do your calculations with a spreadhseet program.
/Stefan
| Alex Kühnel wrote: |
|
hi forum,
my question, is it possible to add a custom menu entry (f.e. "Auswertung"). I will start a new php page and do some system code starting from the new page. I have attached a pic of my "Bereitschaftsdoku".
I have a filter for the week (KW1 2017). With this filer i display all my jobs for this week. At the end I have to count all minutes for class 583 (Tagesstunden) and class 586 (Sonn und Feiertage) and display the results.
regards
/alex
|
|
|
|
How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 12:55:05 2017
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan |
|
Re: How to make two attributes reacting with each other, posted by Stefan Ritt on Thu Jan 5 13:24:06 2017
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:04:13 2017
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Stefan Ritt on Thu Jan 5 14:13:07 2017
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:23:08 2017
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Stefan Ritt on Thu Jan 5 14:35:22 2017
|
If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before.
| Xuan Wu wrote: |
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:40:59 2017
|
What I mean is that, when I select a catagory, the icon will change. If I change the icon, I need the catagory change too.
| Stefan Ritt wrote: |
|
If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before.
| Xuan Wu wrote: |
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Andreas Luedeke on Fri Jan 6 10:22:24 2017
|
IOptions does not support conditional attributes.
I think the proper solution would be to remove the icon selection field from the input form:
Show Attributes Edit = Author, Author Email, Category, System, Subject
The user would then only be able to edit the Category, the Icon would always be set accordingly. I would think that this would be the appropriate behaviour.
Cheers, Andreas
| Xuan Wu wrote: |
|
What I mean is that, when I select a catagory, the icon will change. If I change the icon, I need the catagory change too.
| Stefan Ritt wrote: |
|
If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before.
| Xuan Wu wrote: |
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Fri Jan 6 11:05:18 2017
|
So, as far as I know that ROptions and IOptions doesn't support conditional attributes.
I think what you suggest is a nice idea. An alternative way is putting Category attribute before Icon attribute and adding a tooltip to Icon attribute. However, I think your advice is better. Thanks!
Cheers
Xuan
| Andreas Luedeke wrote: |
|
IOptions does not support conditional attributes.
I think the proper solution would be to remove the icon selection field from the input form:
Show Attributes Edit = Author, Author Email, Category, System, Subject
The user would then only be able to edit the Category, the Icon would always be set accordingly. I would think that this would be the appropriate behaviour.
Cheers, Andreas
| Xuan Wu wrote: |
|
What I mean is that, when I select a catagory, the icon will change. If I change the icon, I need the catagory change too.
| Stefan Ritt wrote: |
|
If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before.
| Xuan Wu wrote: |
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
|
|
|
|