Hi I'm here again,

According to my conf file I run elog under a specified user and group different from root. So I copied the .pem file I obtained from certbot in /etc/ssl as well as /urs/local/elog/ssl and ssl folder in the user directory (I will call it <user-dir>) but when I launch elog I receive the error that cannot initialize SSL because the old self signed certificate server.crt in <user-dir>/ssl is not found.

I wonder where in elog.cfg or elsewhere is written that <user-dir>/ssl/server.crt must be usedand how to fix it

Thanks

I'm working on setting up an elog as lab-journal in our group with the following set-up:

• The elog is running on a server, with no back-end access for the users.
• Multiple people will use it, all loging in with the same user-name and password.
• The entries submitted to the log-book can only be edited for 24hours, as defined by the "Restrict edit time= 24" setting in the configuration file.

Now I encountered the following problem in my set-up: Entries that do not have attachments can be changed after these 24hours have passed, by the following set-up: If a user (in the current case me during testing) sets up a local elog on his computer and activates the synchronisation with the elog on the server, he can switch off the time-restriction for editing on his local elog, and if he synchronises the two log-books, the changed entry from the local elog will overwrite the original one from the server-elog.

Obviously this is not very desirable. Therefore I wanted to ask, whether anyone sees a possibility to prevent the editing of entries, which are older than the restricted edit time. A specific function or a change in the synchronisation behaviour would of course be the completest solution, but in my case the problem would also be solved if I could just prohibit the synchronisation. It is not needed, so no harm will be done if it is not possible.

Hi Stefan

we are running elog

Dear users,

we started an elog serveur (using ssl) and open to the world which is working fine.

However I am trying to access it via the command line client, from a computer that uses a proxy to connect to internet.

The environnment variable are set :

declare -x ftp_proxy="ftp://myproxy:3128/"
declare -x http_proxy="http://myproxy:3128/"
declare -x https_proxy="https://myproxy:3128/"
declare -x socks_proxy="socks://myproxy:3128/"
 

but when I try to connect

elog  -h myelog -p 443 -l lognote -s 1 -u username passwd  -w last

I have the following message :

Cannot connect to host myelog, port 44

How should I proceed ?

Best regards

JG

:

Hello,

Let's say I have a logboook where I define two attributes:

[TOTEM]
Comment = TOTEM Gas System Status
Attributes = Author, D, M, Y, h, min, ...

I would like to modify the "Last submission" so that I display something like %D/%M/%Y, %h:%min

so in my elogd.cfg I added this line:

Last submission = $D / $M / $Y , $h : $min by $Author

however, when display in the selection page instead of getting $min displayed i get the attribute $M+'in' displayed. How does attributes substitution work? is it case unsensitive? how does it behave when different attributes starts with the same name?

 How can I block access to some tools (like edit, erase, config...) for each user? I want only admin users can edit, erase , etc. 

I want know too, how can I erase configuration of SMTP?  I make a test with the "elogd -t" command and now every time I create a new entry in my log book I receve the mensage of error to send email, cause I don't configure a SMTP host. 

 Thanks for help. It work's. 

 But I want to know if I can block a logbook from a user. For example I have a logbook named "Store". I want only users of the vendors have access to this log. How can I do it? 

I didn't find this in manual.

 The only way I find for this trouble is using the "Login user". But we have something best?