Hello,

I've noticed that many times, I start an elog and continue editing adding to a few hours later, then I submit and it deletes everything I entered after the last time a draft was saved. I paid more attention and saw that it saves a draft after about a few minutes, and if I wait too long before submitting, it doesn't let me re-save the draft. My workaround is to copy all text before I submit, so if it ignores whatever I entered after the last saved version, I can edit it and paste it back in. Is there a setting someplace that I can change to fix this problem?

Thanks!

Here's a more complete/correct set of the updated commands:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl bootout system /Library/LaunchDaemons/ch.psi.elogd.plist
sudo launchctl disable system/ch.psi.elogd

Cheers,
Andreas

The section of the ELOG Administrator's Guide https://elog.psi.ch/elog/adminguide.html describing how to build and install ELOG on a Mac OS X system has worked well for me for several years, even though there have been warnings that the "load" and "unload" subcommands of the "launchctl" command have been deprecated for some time.  After trying my luck again on a new Mac with the latest operating system, I encountered errors of the type "Load failed: 5: Input/output error" when attempting to follow these instructions.

After a bit of searching around, I used information at the page https://www.alansiu.net/2023/11/15/launchctl-new-subcommand-basics-for-macos/ to deploy the more current subcommands as follows:

sudo launchctl enable system/ch.psi.elogd
sudo launchctl bootstrap system /Library/LaunchDaemons/ch.psi.elogd.plist 

sudo launchctl disable system/ch.psi.elogd

Once the above can be verified, perhaps the instructions in the Administrator's Guide can be updated accordingly.

I'm traveling right now and will only next week be able to look into that, so please be patient for a few more days.

Stefan

A quick follow-up concerning the secondary matter I mentioned in my last post, namely the issues I had with the deprecated "sudo launchctl load ..." and "sudo launchctl unload ..." subcommands currently provided in the ELOG installation instructions for MacOS.  I found a solution to this -- will post it in a separate thread.

The strangely auto-incrementing attachment counts in the Summary view are still present, and I'm curious if anyone else has experienced those.  Also, I could not find a way to customize the Summary view such that the final (rightmost) column with the attachment counts can be suppressed.  That would at least put the problem out of sight until a developer can intervene and fix the bug.

Hi Members,

I have compiled and installed ELOG in Ubuntu 22.04. My ELOG version is 3.1.5 revision fc6679b. I would like to use both the password file (../logbooks/elog.pwd) and the LDAP for authentication purpose. In addition to this, new users should be able to register and existing users should be able to reset their password.

Anyone could shed some light on how to do this in the configuration file?

Thanks,
Scott

Hi Everybody,

I import a logbook from csv file, with a number for laboratory's notebook, which can be use by multiple intern. I'd like to add a "reply to" when the number is the same, it's like a "move to" but in the same logbook.

Thanks in advance for your help

On a new MacBook Pro (Silicon M3), I installed version 3.1.5 build 23df00d9.  The application appears to work normally, except that, after a short while, the indicated attachment count (paperclips in the attachment column of the Summary view) starts to increment fairly rapidly with each time that I visit the page.  Attachment counts appear even for records that don't have any attachments.  When I access records individually, either those with or without real attachments, everything looks OK.  Any insights as to what might be causing this, and how to correct?

Installation went smoothly using the (now longstanding) MacOS installation instructions, with one small exception: When doing the "sudo launchctl load ..." step, there is occasionally an I/O error of some kind.  (Sorry, I don't have an exact transcript of the error at the moment, but it appears to refer to line 5 of a script.)

Many thanks,

Andreas W.