Hi Stefan,

I don't know if anyone else would be interested or need this...

If you have an Roption, and it is not required (maybe...) or have a preset attribute, it is possible to make an
entry and have replies without any of the attributes in that Roption being selected.

However, once an attribute in that Roption has been selected, it is not possible to go back (editing) to the
condition before one was selected on that entry (so far as I can tell).  

Is a way of cancelling all the possible attributes in an Roption practical?  Would others want it?  It is
possible with options, as there is a "please select" which can be used to cancel whichever attribute in the
option that has been selected.

Regards,  David

Have a few issues here. The big one is that I have some users of our elog books
that are in India, while the server is in USA. When they click on thumbnail images
then press their browser back-button they get a page expired message and are
unable to see what they were looking at before unless they go back to the main
page. Is this an elog problem or something with Apache?

Also when these users in India write messages sometimes we end up with
duplicate messages seconds apart. I'm not sure if they are pressing the submit
button repeatedly or pressing their browser back button. I've suggested they
try not to do that.

Last issue, is there a way to make thumbnail images open in a new window
by default rather then the same window? This would help fix the first issue at
least. Is there some setting to fix the page expiration/time-out issues?

Regards,
Mike

Hello !

Is any posibility to  set  quick filter, for fields with atribute "date", to exactly value, like 15/07/2009, instead of drop menu with values like - last day, last week, etc ?

Tnx in advance ! 

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam