How to pass attachment names to an Execute line?, posted by Alexandre Lindote on Thu Oct 19 11:45:18 2006
|
Hi,
I'm trying to pass the name of an attachment in a "Execute new " line, but I can't seem to get the correct syntax...
I've tried:
Execute new = echo "New document with reference $Internal Ref with the name $attachements " >> /home/zeplin3/lixo.log
Execute new = echo "New document with reference $Internal Ref with the name $attachements1 " >> /home/zeplin3/lixo.log
Execute new = echo "New document with reference $Internal Ref with the name $1 " >> /home/zeplin3/lixo.log
but nothing seem to work. If I remove the $attachments bit the output is correct...
Any suggestions?
Thanks
Alex |
|
How to overide the Date attribute?, posted by Adam Blandford on Wed Nov 24 07:47:25 2010
|
| Hi I have a logbook where I want to override the default Date attribute.
I would like to set it by default to the entry date but enable the user to modify to a different date if desired. This is for entries that pertain to an activity performed on a date different to the entry date.
To acheive this I have created an attribute called "Subject Date" and used preset = $date. In general this works but I would be happy to take any other suggestions on how to acheive it?
Also, how do I remove the fixed "Date" attribute from the logbook summary page?
I have tried:
List = ID, Subject Date, Type, Subject
in the config file but this doesn't appear to work?
Thanks in advance!
Adam |
|
How to not expose elog port when running under a reverse proxy, posted by Nicola on Mon Jan 22 08:22:33 2024
|
I am running elog under Apache as explained in the administrator's guide. Everything works fine, butmy IT service complains about the elog port being publicly exposed, so I have to fix this. As far as I understand when running under a reverse proxy there's no need for the port to be publiuclyexposed, but I cannot find how to configure the elog server to expose it only locally |
|
How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 12:55:05 2017
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan |
How to make personal ELOG to public, posted by Hien Doan on Tue Mar 30 12:56:48 2021
|
Dear experts,
I am trying to use ELOG for my projects which we want to record every daily activities.
I have successful installed the ELOG to the computer (Windows10 -64 bit).
However, I don't know how to make it public or online, that people can access it from their computers.
I am a very newer to the ELOG.
Could you help me on it, please?
Best regards,
Hien. |
How to make a table of contents, posted by Stefan Ritt on Fri Apr 27 14:06:34 2007
|
For those people who have not fully understood the discussion of elog:2218, here is an example table of contents.
First Chapter
The table of contents consists of a set of [url] tags like this:
[url=#first]First chapter[/url]
[url=#second]Second chapter[/url]
[url=#thirs]Third chapter[/url]
Then the chapter header contains a tag like this:
[ANCHOR]first[/ANCHOR]
to which the browser ups if you click the corresponding entry in the table of contents.
... empty lines to full up some space ...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Second chapter
You should jump here if you click on Second chapter at the table of contents.
Third chapter
You should jump here if you click on Third chapter at the table of contents. |
|
How to make Subst run?, posted by Robert Heine on Thu Aug 26 15:37:20 2010
|
Dear colleagues,
I tried to get an Subst <attrib> = $shell(<command>) to work and put this into a Preset text line, like e.g.:
Attributes = subject, ...
Options <name> = test{1}, ...
Subst myvar = $shell(dir)
{1} Preset subject = Test
{1} Preset text = $myvar
Which results in an ELOG-entry having printed "$myvar" in its body instead of the expected substitution. Changing the Subst command to: "Subst myvar = $host" or even to "Subst myvar = Test" also resulted in printing just the string "$myvar" into the submitted Elog-entry. - What am I doing wrong?
Best whishes
Robert |
|
How to login and export to CSV using wget?, posted by Alan Grant on Sun Apr 24 02:09:47 2016
|
Is it possible to use wget to log into elog and export all of a logbook's data into a CSV file?
I can accomplish this perfectly when authentication IS NOT required by using: wget --no-check-certificate -O e:\export.csv http://localhost:8080/demo/?mode=CSV1
However, I cannot accomplish it when authentication IS required by using: wget --no-check-certificate -O e:\export.csv "http://localhost:8080/demo/?mode=CSV1&uname=agrant&upassword=skipper"
The latter appears to show that I've logged in, but the export file only contains a bunch of HTML tags, not the actual data as in the former.
How should I construct the wget command?
|